联系我们

与泰克代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

RF Vector Signal Generators

TSG4100A Series

TSG4100A Series

The TSG4100A Series RF Vector Signal Generator offers mid-range performance and up to 200 MHz modulation bandwidth at an entry-level RF signal generator price. They use a new technique to provide spurious free outputs with low phase noise (-113 dBc/Hz at 20 kHz offset from 1 GHz carrier) and extraordinary frequency resolution (1 μHz at any frequency). The TSG4100A Series comes standard with analog modulation. Convenient, in-field software upgrades allow for easy transition from analog to more advanced vector and digital modulation capabilities, providing the most flexible configuration and best CAPEX protection. These instruments complement other leading mid-range RF test solutions from Tektronix, such as the USB-based RSA306 Spectrum Analyzer and MDO4000B and MDO3000 Mixed Domain Oscilloscopes.

The TSG4100A Series instruments use an ovenized SC-cut oscillator (TSG410xA-M00 or E1 models) time-base, providing a 100 X improvement in stability (and a 100 X reduction in the in-close phase noise) compared to instruments that use a TCXO time-base.

Key features
  • Analog and vector/digital signal generation capabilities
  • Dual baseband ARB generators
  • Analog modulation standard
  • Soft key upgrade to vector/digital modulation at very low cost
  • Digital modulation applications for GSM, EDGE, W-CDMA, APCO-25, DECT, NADC, PDC, and TETRA
  • USB, GPIB, RS-232, and LAN interfaces
  • 12 pounds (5.6 kg)
  • 2U high and half standard rack width

 

Key performance specifications
  • True DC to 2 GHz, 4 GHz or 6 GHz to support both analog and vector/digital signal generation
  • Typical ≤±0.30 dB amplitude accuracy (0 dBm CW signal at 22 ºC) from 10 MHz to 6 GHz
  • I/Q modulation inputs (400 MHz RF bandwidth)
  • ASK, FSK, MSK, PSK, QAM, VSB, and custom I/Q

Analog modulation

The Tektronix TSG4100A Series RF Vector Signal Generators offer a wide variety of modulation capabilities. Modes include amplitude modulation (AM), frequency modulation (FM), phase modulation (ΦM), and pulse modulation. There is an internal modulation source as well as an external modulation input. The internal modulation source produces sine, ramp, saw, square, and noise waveforms. An external modulation signal may be applied to the rear panel modulation input. The internal modulation generator is available as an output on the rear panel.

Vector modulation

The TSG4100A Series builds on this performance by adding full support for vector signal modulation on RF carriers between 400 MHz and 6.0 GHz. It features a dual arbitrary waveform generator operating at 125 MHz for baseband signal generation. The generator has built-in support for the most common vector modulation schemes: ASK, QPSK, DQPSK, π/4 DQPSK, 8PSK, FSK, CPM, QAM (4 to 256), 8VSB, and 16VSB. It also includes built-in support for all the standard pulse shaping filters used in digital communications: raised cosine, root-raised cosine, Gaussian, rectangular, triangular, and more. Lastly, it provides direct support for the controlled injection of additive white Gaussian noise (AWGN) into the signal path.

Internal baseband generators

Using a novel architecture for I/Q modulation, the TSG4100A Series provides quick, user-friendly waveform generation. The baseband generator supports the playback of pure digital data. It automatically maps digital symbols into a selected I/Q constellation at symbol rates of up to 6 MHz and passes the result through the selected pulse shaping filter to generate a final waveform updated in real time at 125 MHz. This baseband signal is then modulated onto an RF carrier using standard IQ modulation techniques.

Digital communications protocols (GSM, GSM EDGE, W-CDMA, APCO-25, DECT, NADC, PDC, and TETRA) quickly configure the signal generator to the correct modulation type, symbol data rates, TDMA duty cycles, and digital waveform filters. The preset protocols also configure the rear-panel TDMA, START of FRAME, and SYMBOL CLOCK digital outputs. The baseband generators can be configured for these protocols without the use of external computers or third party software.

The I/Q waveforms are computed in real time. Symbols are mapped to constellations, digitally filtered, and up-sampled to 125 Msps to drive the I/Q modulator via dual 14-bit DACs. The symbols can be a fixed pattern, PRBS data from an internal source, or come from a downloaded user list of up to 16 Mbits.

The constellation mapping can be modified by the user. Digital filters include raised cosine, root raised cosine, Gaussian, rectangular, linear, sinc, and user-defined FIR.

External IQ modulation

The rear-panel BNC I/Q modulation inputs and outputs enable arbitrary vector modulation via an external source. The external signal path supports maximally 400 MHz of RF bandwidth with a full scale range of ±0.5 V and a 50 Ω input impedance.

Power vs. frequency

All TSG4100A Series models have cascaded stages of amplifiers and digital attenuators to drive the RF output. Five stages can provide up to +25 dB of gain to -130 dB of attenuation in 156 digitally controlled steps. During factory calibration, the output power is measured at 32 frequencies per octave for each of the 156 attenuator steps to populate a memory matrix with about 40,000 elements. When set to a particular frequency and power, the instrument interpolates between these matrix elements to determine the best attenuator setting. An analog attenuator is used to provide 0.01 dB resolution between matrix elements and to compensate for residual thermal effects.

OCXO time-base

These instruments offer an oven-controlled crystal oscillator (OCXO) time-base. The time-base uses a third-overtone stress-compensated 10 MHz resonator in a thermostatically controlled oven. The time-base provides very low phase noise and very low aging.

Easy remote communications

Remote operation is supported with RS-232, LAN, and GPIB interfaces. All instrument functions can be controlled and read over any of the interfaces. Up to nine instrument configurations can be saved in non-volatile memory.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Frequency
BNC output, all models
DC to 62.5 MHz
N-type outputs
TSG4102A
950 kHz to 2.0 GHz
TSG4104A
950 kHz to 4.0 GHz
TSG4106A
950 kHz to 6.0 GHz
Frequency resolution
1 μHz at any frequency
Switching speed
<8 ms (to within 1 ppm)
Frequency error
<(10–18 + time-base error) × fc
Frequency stability
1 × 10–11 (1 s Allan variance)
Front panel BNC output
Frequency range
DC to 62.5 MHz
Amplitude
1.00 VRMS to 0.001 VRMS (-47 dBm to +14.96 dBm)
Offset
±1.5 VDC
Offset resolution
5 mV
Maximum excursion
1.817 V (amplitude + offset)
Amplitude resolution
<1 %
Amplitude accuracy
±0.7 dB
Harmonics, typical
<–40 dBc
Spurious, typical
<–65 dBc
Output coupling
DC, 50 Ω ±2%
Impedance
50 Ω
Reverse protection
±5 VDC
VSWR, typical
< 1.6 :1 
Front panel N-type output
Power output
TSG4102A
+16.5 dBm to –110 dBm
TSG4104A
+16.5 dBm to –110 dBm (<3 GHz)
TSG4106A
+16.5 dBm to –110 dBm (<4 GHz)

+10 dBm to –110 dBm (4-6 GHz)

Voltage output
TSG4102A
1.5 VRMS to 0.7VRMS
TSG4104A
1.5 VRMS to 0.7 μVRMS (<3 GHz)
TSG4106A
1.5 VRMS to 0.7 μVRMS (<4 GHz)
Amplitude resolution
0.01 dBm
Amplitude accuracy
CW, 50 Ω load (dB, typical)
CW, 18 °C to 28 °C >10 dBm 10 to -30 dBm -30 to -60 dBm -60 to -100 dBm <-100 dBm
10 MHz to 0.1 GHz ±0.2  ±0.25  ±0.35  ±0.45  ±0.6 
0.1 GHz to 2 GHz ±0.15  ±0.15  ±0.25  ±0.35  ±0.6 
2 GHz to 4 GHz ±0.3  ±0.2  ±0.35  ±0.6  ±0.8 
4 GHz to 6 GHz NA ±0.3  ±0.4  ±0.75  ±1.25 
 
 
CW, 50 Ω load (dB, max)
Level range: +5 to -30 dBm (max) +5 to -30 dBm (typical)
Temperature: 18 °C to 28 °C 5 °C to 40 °C 5 °C to 40 °C
10 MHz to 0.1 GHz ±0.6  ±1.0  ±0.7 
0.1 GHz to 2 GHz ±0.6  ±1.0  ±0.6 
2 GHz to 4 GHz ±0.6  ±1.0  ±0.7 
4 GHz to 6 GHz ±1  ±1.5  ±0.9 
Impedance
50 Ω
Output coupling
AC, 50 Ω
VSWR, typical
<1.5 (2 MHz to 2 GHz)

<1.8 (2 GHz to 6 GHz)

Reverse protection
30 VDC, +25 dBm
IQ modulation output level accuracy
Output amplitude is -5 dBm.
Temperature: 18 °C to 28 °C 5 °C to 40 °C
Fc: Typical (dB) Max (dB) Typical (dB)
<2 GHz ±0.1  ±0.4  ±0.4 
2 GHz to 4 GHz ±0.2  ±0.6  ±0.4 
4 GHz to 6 GHz ±0.4  ±0.8  ±0.7 
Spectral purity of the RF output
Subharmonics
None
Harmonics, maximum
Output level <0 dBm, 1 GHz CW signal
TSG4102A and TSG4104A
< -38 dBc
TSG4106A
< -30 dBc
Harmonics, typical (output level < 0 dBm)
< -35 dBc, CW , Fc < 2 GHz
Spurious (typical)
Output level -10 dBm, CW
< -68 dBc
>10 kHz from carrier in 950 kHz to 1 GHz
< -60 dBc
>10 kHz from carrier in 1 GHz to 2 GHz
< -55 dBc
>10 kHz from carrier in 2 GHz to 4 GHz
< -55 dBc
>10 kHz from carrier in 4 GHz to 6 GHz
Residual FM, typical
1 Hz rms (300 Hz to 3 kHz bandwidth)
Residual AM, typical
0.006 % rms (300 Hz to 3 kHz bandwidth)
SSB phase noise
Output level is +5 dBm at 18 °C to 28 °C.
Carrier Offset from carrier, typical (dBc/Hz)
1 kHz 10 kHz 20 kHz 1 MHz
1 GHz -102  -110  -113  -124 
2 GHz -96  -104  -107  -118 
3 GHz -93  -102  -105  -120 
6 GHz -87  -96  -99  -114 
SSB phase noise at 1 GHz carrier, maximum (output level +5 dBm, 5 ℃ to 40 ℃)
1 kHz offset
–95 dBc/Hz
10 kHz offset
–106 dBc/Hz
20 kHz offset
–107 dBc/Hz
1 MHz offset
–120 dBc/Hz
2 GHz offset
–118 dBc/Hz
>3 GHz offset
–120 dBc/Hz
 

 

 

 

 

 

 

Phase setting (front panel outputs)
Maximum phase step
±360º
Phase resolution
0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1.0º (1 GHz to 6 GHz)

OCXO time-base (Option M00 or Option E1)
Oscillator type
Oven-controlled, 3rd OT, SC-cut crystal
Initial accuracy at calibration (20 minute warm-up, at 18 ºC to 28 ºC)
<±0.02 ppm
Temperature drift (0 ºC to 40 ºC)
<±0.003 ppm
Aging
<±0.05 ppm/year
VCXO time base (Option M01)
Initial accuracy at calibration (20 minute warm-up, at 18 ºC to 28 ºC)
<±0.5 ppm
Temperature drift (0 ºC to 40 ºC)
<±5.0 ppm
Aging
<±3.0 ppm/year
Time-base input
Frequency
10 MHz, ±2 ppm
Amplitude
0.5 VP-P to 4 VP-P (–2 dBm to +16 dBm)
Input impedance
50 Ω, AC coupled
Time-base output
Frequency
10 MHz, sine
Source
50 Ω, DC transformer coupled
Amplitude
>7.5 dBm
Internal modulation source
Waveforms
Sine, ramp, saw, square, pulse, noise
Sine THD
–74 dBc (typical at 20 kHz)
Ramp linearity
<0.05 % (1 kHz)
Rate
TSG4102A and TSG4104A
1 μHz to 500 kHz: < 62.5 MHz CF

1 μHz to 50 kHz: ≥62.5 MHz

TSG4106A
1 μHz to 500 kHz: < 93.75 MHz CF

1 μHz to 50 kHz: ≥93.75 MHz

Rate resolution
1 μHz
Rate error
1:231 + time-base error
Noise function
White Gaussian noise (rms = dev / 5)
Noise bandwidth
1 μHz < ENBW < 50 kHz
Pulse generator period
1 μs to 10 s
Pulse generator width
100 ns to 9999.9999 ms
Pulse timing resolution
5 ns
Pulse noise function
Length 2N-1 PRBS 5 ≤ N ≤ 32, bit period 100 nS to 10 S
Analog modulation output
Connector type
BNC (rear panel)
Impedance
50 Ω
Function
AM, FM, ΦM, Pulse
Scale factor
±1 V for ± full deviation
Pulse/Blank
Low = 0 V

Hi = 3.3 V

External analog modulation input
Connector type
BNC (rear panel)
Impedance
100 kΩ
Function
AM, FM, ΦM, Pulse
Scale factor
±1 V for ± full deviation
Pulse/Blank
Low = 0 V

Hi = 3.3 V

Input coupling
DC or 4 Hz High-pass
Pulse Threshold
+1 VDC
Input Offset
< 500 μV
Amplitude modulation
Range
0 to 100% (decreases above +7 dBm)
Resolution
0.1%
Modulation source
Internal or external
Modulation distortion, typical
BNC output
<1 % (fc < 62.5 MHz, fm = 1 kHz)
N-type output
<3 % (fc > 62.5 MHz, fm = 1 kHz)
Modulation bandwidth (external)
>100 kHz
Frequency modulation
Minimum frequency deviation
0.01 Hz
Maximum frequency deviation
TSG4102A and TSG4104A
Smaller of fc and 64 MHz – fc. In 0 to 62.5 MHz
Frequency range Maximum deviation
62.5 MHz < fc ≤ 126.5625 MHz 1 MHz
126.5625 MHz < fc ≤253.1250 MHz 2 MHz
253.1250 MHz < fc ≤ 506.25 MHz 4 MHz
506.25 MHz < fc ≤ 1.0125 GHz 8 MHz
1.0125 GHz < fc ≤ 2.0 GHz 16 MHz
2.025 GHz < fc ≤ 4.0 GHz (TSG4104A) 32 MHz
TSG4106A
Smaller of fc and 96 MHz – fc. In 0 to 93.75 MHz
Frequency range Maximum deviation
93.75 MHz < fc ≤ 189.84375 MHz 1 MHz
189.84375 MHz < fc ≤ 379.6875 MHz 2 MHz
379.6875 MHz< fc ≤ 759.375 MHz 4 MHz
759.375 MHz < fc ≤ 1.51875 GHz 8 MHz
1.51875 GHz < fc ≤ 3.0375 GHz 16 MHz
3.0375 GHz < fc ≤ 6.0 GHz 32 MHz
Deviation resolution
0.1 Hz
Deviation accuracy, typical
TSG4102A and TSG4104A
< 0.1% of selected deviation + 5 Hz (fc < 62.5 MHz)

< 2% of selected deviation + 20 Hz (fc > 62.5 MHz)

TSG4106A
< 0.1% of selected deviation + 5 Hz (fc < 93.75 MHz)

< 2% of selected deviation + 20 Hz (fc > 93.75 MHz)

Modulation source
Internal or external
Modulation distortion, typical
< -60 dB (fc=100 MHz, fm=1 KHz, fd= 3 KHz)
External FM carrier offset, typical
< ±0.001 X FM deviation
Modulation bandwidth, typical
TSG4102A and TSG4104A
500 kHz (fc < 62.5 MHz)

100 kHz (fc > 62.5 MHz)

TSG4106A
500 kHz (fc < 93.75 MHz)

100 kHz (fc > 93.75 MHz)

Phase modulation
Deviation
0º to 360º
Deviation resolution, typical
0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1º (1 GHz and above)

Deviation accuracy, typical
TSG4102A and TSG4104A
2% (fc < 62.5 MHz)

 

3% (fc > 62.5 MHz)

TSG4106A
2% (fc < 93.75 MHz)

3% (fc > 93.75 MHz)

Modulation source
Internal or external
Modulation distortion, typical
< -60 dB (fc = 100 MHz, fm =1 kHz, ΦD = 50º)
Modulation bandwidth, typical
TSG4102A and TSG4104A
500 kHz (fc < 62.5 MHz)

100 kHz (fc > 62.5 MHz)

TSG4106A
500 kHz (fc < 93.75 MHz)

100 kHz (fc > 93.75 MHz)

Pulse modulation
Pulse mode
Logic High turns RF output ON
On-Off ratio, typical
BNC output
> 70 dB
Type-N output
> 57 dB (fc < 1.0 GHz)

> 40 dB (1.0 GHz ≤ fc < 4.0 GHz)

> 35 dB (4.0 GHz ≤ fc < 6.0 GHz)

Pulse feed-through, typical
10% of carrier for 20 ns at turn on
Turn On-Off delay
60 ns
RF Rise-Fall time, typical
20 ns
Modulation source
Internal or external pulse
Interface connectors
USB
USB 2.0, host
Ethernet (LAN)
10/100 Base-T.TCP/IP and DHCP default
GPIB
IEEE488.2 
RS-232 
4800 to 115,200 baud, RTS/CTS flow
External I/Q modulation (Option EIQ)
Carrier frequency range
400 MHz to 2.0 GHz (TSG4102A)

400 MHz to 4.0 GHz (TSG4104A)

400 MHz to 6.0 GHz (TSG4106A)

I/Q inputs (rear panel)
50 Ω, ±0.5 V
I/Q full scale input
(I2 + Q2)1/2 = 0.5 V
Modulation bandwidth
max 400 MHz RF bandwidth
I or Q input offset
<500 μV
Carrier suppression
> -45 dBc for fc ≤ 3 GHz

> -40 dBc for 3 GHz < fc ≤ 5 GHz

> -35 dBc for fc > 5 GHz

I and Q baseband modulation bandwidth (3 dB from fc)
> 200 MHz (fc < 2.5 GHz, RF BW >400 MHz)

> 150 MHz (fc > 2.5 GHz, RF BW >300 MHz)

Dual baseband generator (Option VM00)
Channels
2 (I and Q)
DAC data format
Dual 14-bit at 125 MS/s
Reconstruction filter
10 MHz, 3rd order Bessel LPF
Arbitrary symbol memory
Up to 16 Mbits
Symbol rate
1 Hz to 6 MHz (1 μHz resolution)
Symbol length
1 to 9 bits (maps to constellation)
Symbol mapping
Default or user-defined constellation
Symbol source (User-defined symbols, built-in PRBS generator, or settable pattern generator)
PRBS length
2n – 1 (5 < n < 32; 31 to about 4.3 × 109 symbols)
Pattern generator
16 bits
Digital filtering
Filter type
Raised Cosine, Root Raised Cosine, Gaussian, Rectangular, Linear, Sinc, linearized Gaussian, C4FM, customized FIR
Filter length
24 symbols
Noise impairments
Additive noise
White, Gaussian
Level
–70 dBc to –10 dBc
Basic vector modulation formats (Option VM00)
Formats by bit
Constellation 1-bit 2-bit 3-bit 4-bit 5-bit 6-bit 8-bit
ASK 2ASK 4ASK 8ASK 16ASK      
FSK BFSK 4FSK 8FSK 16FSK      
PSK BPSK QPSK 8PSK 16PSK      
QAM n/a 4QAM n/a 16QAM 32QAM 64QAM 256QAM
CPM BCPM 4CPM 8CPM 16CPM      
VSB n/a n/a 8VSB 16VSB      
Others
OQPSK, DQPSK, π/4DQPSK, 3π/8 8 PSK
Digital modulation applications (typical)
Digital modulation applications options
Option Application
VM01 GSM
VM02 GSM-EDGE
VM03 W-CDMA
VM04 APCO-25 Phase 1 
VM05 DECT
VM06 NADC
VM07 PDC
VM08 TETRA
VM10 Audio clip (analog AM and FM)

Option VM01 GSM, (GMSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.6%

 

 

Option VM02 GSM-EDGE, (3π/8 8PSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.30%

 

 

Option VM03 W-CDMA, (QPSK,3.840Mcps, 2.1425GHz, 0dBm), RMS EVM: 1.7%

 

 

Option VM03 W-CDMA (QPSK,3.840Mcps, 1.85 GHz, 0dBm), RMS EVM: 1.7%

 

Option VM04 APCO-25, (4FSK-C4FM, 4.8 kS/s,850 MHz, 0 dBm), Freq Err: 0.5%

 

 

Option VM05 DECT, (2FSK 1.152 Mbps,1.925 GHz, 0 dBm), RMS FSK Err: 1.5%

 

 

Option VM06 NADC, (π/4 DQPSK, 24.3 kS/s, 875 MHz, 0 dBm), RMS EVM: 0.3%

 

 

Option VM07 PDC, (π/4 DQPSK, 21 kS/s, 800 MHz, 0 dBm), RMS EVM: 0.6%

 

 

Option VM08 TETRA, (π/4 DQPSK,18 kS/s, 420 MHz, 0 dBm), RMS EVM: 0.7%

 

 

32QAM, (6 MS/s, 5.8 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.6%

 

 

256QAM, (6 MS/s, 2.45 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.1%

 

TSG4100A-ATT Option
Nominal impedance
50 Ω
Nominal attenuation
30 dB
Frequency range
DC to 6 GHz
Attenuation deviation
±0.75 dB (DC to 6 GHz)
Maximum VSWR
1.15 (DC to 4 GHz)

1.2 (4 GHz to 6 GHz)

Power rating
5 Watt average power up to 25 ˚C ambient temperature, linearly derated to 1 Watt at 125 ˚C ambient temperature.
Weight
0.052 kg
Operating temperature
-65 °C to 125 °C
Compliance
2011/65/EU (RoHS) compliant
Rear-panel markers
Type
Symbol Clock, Data Frame, TDMA, and user-defined
Amplitude
0.5 to 4 Vpp (–2 dBm to +16 dBm)
Output impedance
50 Ω, AC coupled
Physical characteristics
Dimensions
Height
114 mm (4.5 in)
Width
216 mm (8.5 in)
Depth
347 mm (13.7 in)
Weight
5.4 kg (12 lbs)
Operating characteristics
Temperature
Operating
+5 °C to +40 °C
Non-operating
-20 °C to +60 °C
Humidity
Operating Non-operating
5% to 95% relative humidity (%RH) at up to +30 °C 5% to 95% RH (Relative Humidity) at up to +30 °C
5% to 45% RH above +30 °C up to +40 °C, non-condensing 5% to 45% RH above +30 °C up to +40 °C, non-condensing
Altitude
Operating
Up to 3,000 m
Non-operating
Up to 12,000 m
Line power
<90 W, 90 to 264 VAC, 47 to 63 Hz with PFC
Vibration and shock
Random vibration
Operating Non-operating
0.27 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Option M01) 2.28 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Option M01)
0.22 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Options M00 or E1) 2.13 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Options M00 or E1)
Mechanical shock
Non-operating
Half-sine mechanical shocks, 50 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Option M01)
Half-sine mechanical shocks, 30 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Options M00 or E1)
Regulatory information
EC Declaration of Conformity - EMC
EMC Directive 2004/108/EC
EN 61326-1 
Radiated and Conducted emissions
Class A
Australia/New Zealand
Australia Radio Communications Act 1992 
Korea
KCC
Safety
Third Party Certification Standards
UL 61010; CSA C22.2 No. 61010-1 
EC Declaration of Conformity - Low Voltage
Low Voltage Directive 2006/95/EC; EN61010-1 
Safety Certification Compliance
Equipment type: Test and measuring
Safety class: Class 1 - grounded product
Pollution degree: 2 (as defined in IEC61010-1)
Rated for indoor use only.

Ordering information

Models
For each of the basic models, there are three required but exclusive model options that need to be specified at the time of order: M00, M01, and E1. Pricing varies based on chosen option. See the Instrument Options section for details.
TSG4102A
Analog signal generator with 2 GHz frequency coverage, basic model
TSG4104A
Analog signal generator with 4 GHz frequency coverage, basic model
TSG4106A
Analog signal generator with 6 GHz frequency coverage, basic model
Standard accessories
Accessory Description
RF cable 1 meter, N-type to N-type RF cable
Documentation CD All instrument models ship with a CD containing PDF files of user manuals in all available languages.
Installation and Safety Instructions All instrument models ship with a printed Installation and Safety Instructions manual (multi-language: English and Russian).
Calibration Statement of Calibration
Power cord Country specific (see Power cord options)
Warranty
Three years
Instrument options
Hardware options (All regions except North America)

Options M00 or M01 must be specified at the time of instrument order.

M00
Instrument with oven-controlled crystal oscillator (OCXO)
M01
Instrument with voltage-controlled crystal oscillator (VCXO)
GPIB
Adds GPIB interface
Hardware options (North America only)

Option E1 must be specified at the time of instrument order.

E1
Instrument with oven-controlled crystal oscillator (OCXO) time-base and GPIB interface
Hardware options (All regions)
TSG4100A-RM1
Single rack mount kit (can be ordered separately)
TSG4100A-RM2
Dual rack mount kit (can be ordered separately)
TSG4100A-ATT
30 dB, 5 W RF attenuator up to 6 GHz
D1
A list of performance verification test results
Software options

To upgrade to vector/digital modulation capability and/or add more modulation options after initial purchase, order "TSG4100A-UP + VM xx” instead of “TSG410xA VMxx”.

VM00
Basic vector modulation package with internal 6 MHz modulation bandwidth
VM01
GSM modulation (requires Option VM00)
VM02
GSM EDGE modulation (requires Option VM00)
VM03
W-CDMA modulation (requires Option VM00)
VM04
APCO-25 modulation (requires Option VM00)
VM05
DECT modulation (requires Option VM00)
VM06
NADC modulation (requires Option VM00)
VM07
PDC modulation (requires Option VM00)
VM08
TETRA modulation (requires Option VM00)
VM10
Audio Clip (analog AM and FM)
EIQ
External 200 MHz modulation bandwidth (requires Option VM00)
Power plug options
Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A3
Australia power plug (240 V, 50 Hz)
Opt. A5
Switzerland power plug (220 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 50/60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
Language options

Request the option below if you would like to order a printed verison of the English User Manual. (An electronic version of this manual is provided as a PDF on the CD that shipped with your instrument and is also available for download from the Tektronix Web site.)

Opt. L0
English manual
Service options
Opt. C3
Calibration Service 3 Years
Opt. C5
Calibration Service 5 Years
Opt. D1
Calibration Data Report
Opt. D3
Calibration Data Report 3 Years (with Opt. C3)
Opt. D5
Calibration Data Report 5 Years (with Opt. C5)
Opt. R5
Repair Service 5 Years (including warranty)