下载
下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

DPO7000

高达 3.5 GHz 的带宽以及高达 40 GS/s 的采样率,使 DPO7000C 系列成为分析重要高速信号时的不二之选。 超过 30 种分析包为通信标准、抖动分析、内存总线标准、矢量分析等等提供深入测量。 此外,Windows 操作系统允许您就在仪器上运行自己的分析软件。

带宽

高达 3.5 GHz

模拟通道

4

记录长度

高达 500
M 点

采样率

高达 40 GS/s

高级信号测量和分析

高级信号测量和分析

标准分析工具包括 53 种自动测量、测量统计、直方图、极限测试、高级波形数学、用户可定义的滤波器并支持自定义 MATLAB 和 .NET 数学插件。 可添加高级抖动和眼图分析以及宽带射频分析等专用应用,以扩展测量功能。

特点

  • 使用标准测量工具套件检定信号参数
  • 高级抖动和定时分析可检定信号完整性问题以及信号源
  • SignalVu 软件可提供宽带频谱分析和测量功能,以及音频、调制、射频脉冲和稳定时间选件
  • TekScope Anywhere TM 软件支持离线测量和分析

强大的触发功能让您更轻松地进行捕获

强大的触发功能让您更轻松地进行捕获

轻松捕获信号异常,包括毛刺、欠幅、设置/保持违例,以及对高达 1.25 Gb/s 的串行数据流的 NRZ 码型锁定,支持 Pinpoint® 触发以及虚拟触发和搜索。

特点

  • 1,400 多个可用触发组合
  • 快速定义复杂触发并使用虚拟触发以图形化方式搜索标准
  • 可选串行触发可提供协议感知信号捕获功能

串行分析和一致性测试,正确完成

自动功率测量

对于低中速总线,使用协议解码和串行触发选项来简化高级系统设计调试和验证。 使用自动一致性测试确保中速串行总线的互操作性。

特点

  • 协议解码以及串行触发和分析选件,适用于 I 2 C、SPI、RS-232/422/485/UART、USB 2.0、以太网、MIL-STD-1553B、CAN、LIN 和 FlexRay
  • 自动一致性测试软件包,适用于 USB 2.0、以太网、HSIC、MOST 和 BroadR-Reach

自动功率测量

自动功率测量

自动测量和报告可确保简单、可重复的电源质量、开关损耗、磁损耗和谐波测量等,满足当前高效电源转换器的测量要求。 此外,智能 TekVPI 电流和差分探头可降低不确定性并消除功率测量困难。

特点

  • MOSFET 开关损耗和安全作业区分析
  • IEC61000-3-2 预一致性的功率因数和谐波测量
  • 电路内电感器和变压器损耗测量
  • USB2.0 电池充电器技术规范 v1.1 和 IEC 62684 的 USB 电源适配器一致性测试
型号 模拟带宽 采样率 记录长度 模拟通道 报价
价格:价格如有变更,恕不另行通知。
型号 模拟带宽 采样率 记录长度 模拟通道 报价
价格:价格如有变更,恕不另行通知。
  Tektronix
DPO7000C
Tektronix
MSO/DPO5000B
Keysight
S 系列
LeCroy
HDO6000
带宽 500 MHz 至 3.5 GHz 350 MHz 至 2 GHz 500 MHz 至 8 GHz 350 MHz 至 1 GHz
模拟通道 4 4 4 4
模拟采样率(所有通道) 可达 10 Gs/s 最大 5 GS/s 可达 10 Gs/s 可达 2.5 GS/s
模拟采样率(1 条通道) 可达 40 Gs/s 可达 10 Gs/s 可达 20 Gs/s 可达 2.5 GS/s
最大可选记录长度(1 条通道) 500 M 250 M 100 M 250 M
波形捕获率(波形/秒) >310,000 >250,000 未指定 未指定
操作系统 Windows Windows Windows Windows

 

自动功率测量

自动功率测量

自动测量和报告可确保简单、可重复的电源质量、开关损耗、磁损耗和谐波测量等,满足当前高效电源转换器的测量要求。 此外,智能 TekVPI 电流和差分探头可降低不确定性并消除功率测量困难。

特点

  • 选件 PWR:用于功率器件和电源的检定和测试的高级功率测量和分析解决方案,包括电源质量和谐波测试
  • 选件 USBPWR:USB2.0 电池充电器技术规范 v1.1 和 IEC 62684 的 USB 电源适配器自动一致性测试

自动串行分析和一致性测试

自动功率测量

对于 CAN、LIN 和 FlexRay 总线,使用协议解码和串行触发选项可简化自动系统设计调试和验证。 使用自动一致性测试确保 BroadR-Reach 和 MOST 串行设备的互操作性。

特点

  • 选件 SR-AUTO:CAN、LIN 和 FlexRay 串行数据包内容协议触发和解码
  • 选件 BRR:BroadR-Reach/100BASE-T1 和 1000BASE-T1 自动一致性测试解决方案
  • 选件 MOST:MOST50 和 MOST150 主控和设备设计的电气一致性和调试测试解决方案

嵌入式串行解码和分析

嵌入式串行解码和分析

I 2 C、SPI、RS-232/422/485/UART、USB 2.0、以太网和 MIL-STD-1553B 协议解码、串行触发和分析,可简化高级系统设计调试和验证。

特点

  • 选件 SR-AERO MIL-STD-1553B 串行数据包内容协议触发和解码
  • 选件 SR-COMP RS-232/422/485/UART 串行数据包内容协议触发和解码
  • 选件 SR-DPHY MIPI® D-PHY 串行数据包内容上自动解码和搜索
  • 选件 SR-EMBD I 2 C 和 SPI 串行数据包内容协议触发和解码
  • 选件 SR-ENET 10BASE-T 和 100BASE-TX 串行数据包内容上协议搜索和解码
  • 选件 SR-USB USB 2.0 串行数据包内容低速、全速和高速协议触发和解码

串行一致性测试

串行一致性测试

使用自动一致性测试确保 USB 2.0 和以太网串行总线设计的互操作性

特点

  • 选件 ET3 对 10BASE-T、100BASE-TX 和 1000BASE-T 的自动检定、一致性和完整 PHY 层支持
  • 选件 USB2 通过自动仪器和测试模式控制,进行“一触即成的”一致性测试
  • 选件 HSIC 主控和设备设计电气信号质量测试和协议验证
  • 选件 DDRA 适用于 DDR1/2/3/4、LPDDR1/2/3/4 和 GDDR3/5 的完整内存接口分析包

高级抖动和定时分析

高级抖动和定时分析

通过采用完善的抖动和眼图分析及分解算法,DPOJET 简化了发现当前高速串行、数字和通信系统路中的信号完整性问题和抖动及相关来源的工作。

特点

  • 检定高速串行总线和并行总线设计的性能
  • 检定时钟和数据抖动/噪声和信号完整性
  • 检定扩频时钟电路的调制性能
  • 对串行标准执行 PHY 测试,如 MIPI® D-PHY、DDR 和 MOST

宽带射频分析

宽带射频分析

SignalVu 射频和矢量信号分析软件可以在一台仪器中,同时实现矢量信号分析仪功能、频谱分析仪功能及数字示波器的强大触发功能。 使用 SignalVu 轻松验证宽带设计并检定宽带频谱事件。

特点

  • 选件 SVE:SignalVu Essentials 可提供宽带频谱分析和测量功能
  • 选件 SVA:SignalVu AM/FM/直接音频测量
  • 选件 SVM:SignalVu 通用调制分析
  • 选件 SVP:SignalVu 高级脉冲信号分析
  • 选件 SVT:SignalVu 稳定时间测量 - 频率和相位
产品技术资料 软件包 / 软件选件 描述 配置和报价
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

本手册介绍MSO/DPO70000DX 系列、MSO/DPO70000C 系列、DPO7000 系列、MSO5000B 系 列和DPO5000B 系列仪器的安装和操作。


部件号: 071298406
主要用户
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

本手册介绍MSO/DPO70000DX 系列、MSO/DPO70000C 系列、DPO7000 系列、MSO5000B 系 列和DPO5000B 系列仪器的安装和操作。
部件号: 071298405
主要用户
China RoHS Supplemental, 071217906
Product Information Sheet for People's Republic of China Other

This sheet contains supplemental product information for the People's Republic of China.
部件号: 071217906
用户
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

本手册介绍MSO/DPO70000DX 系列、MSO/DPO70000C 系列、DPO7000 系列、MSO5000B 系 列和DPO5000B 系列仪器的安装和操作。
部件号: 071298404
主要用户
CSharp Extract Trigger Timestamp from .wfm File_使用CSharp分析wfm波形_读取触发时间
本例程提供了基本使用C#分析示波器采集的波形WFM数据,并读取触发的时间位置;程序会读取目录下所有的wfm文件,并且输出每一个wfm中触发的时间。 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
编码采样
DPO7k MATLAB ICT Get FastFrame Waveform_使用Matlab设置示波器FastFrame以及读取波形数据
演示了如何用Matlab对DPO7K示波器设置FastFrame并读取数据。 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
编码采样
DPO MATLAB ICT Get Waveform_使用Matlab读取DPO示波器的波形
演示了如何用Matlab对DPO进行编程读取波形数据。 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
编码采样
MATLAB ICT plot points_通过Matlab绘制波形
使用Matlab从示波器中读取波形数据并绘制。 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
编码采样
Matlab FastFrame Summary Frame Transfer_高级Fastframe数据处理
This program acquires 10 frames of a FastFrame acquisition, creates a summary frame that averages all the other frames together, transfers the waveform data from the summary frame to the computer, and plots the correctly scaled waveform. You will …
编码采样
CSharp_使用Curve命令读取示波器波形
本例程提供了基本使用C#对示波器的控制并用Curve命令读取深存储数据,并存成CSV格式 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性;存储深度超过1M样点后建议保存为二进制文件
编码采样
TEKTRONIX TEKScope IVI Driver V3.7
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

部件号: 066045313
驱动程序
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0.1
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes.DPOJET operates in either of two tiered modes, selected by option key:- The …

部件号: 066152100
应用
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-B-C-D Win XP - Win 7
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

部件号: 066141600
应用
TDSET3 Ethernet Compliance SW DPO-DSA-MSO5000-7000-70000-B-C-D - WinXp, Win7 V3.2.5
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

部件号: 066079617
应用
利用多种工具,把示波器测量分辨率提高到11 位以上
在进行高分辨率测量时,您可以把数字示波器看作一个整体系统,来改善测量结果。在对示波器工作模式、探头性能特点、过滤技术及整个系统交互方式有了基 本了解之后,您可以改善小信号细节的测量效果。

文献编号: 48W-27802-4
应用指南
泰克USB 测试解决方案
电接口验证和一致性测试、信号路径检定、数字验证和调试、无线EVM 一致性测试

文献编号: 55C-17700-6
速查资料
TriMode™ 三模探头构架
串行数据标准,如PCI Express ,SATA 和HDMI 需要在测量差模和单端参数的同时,也测量共模参数。这些测量通常会耗费很多时间,因为需要重复细致地连接、再连接多个差分探头,然后再把这些探头移动到下一个测试点,以完成必须的测量任务。使用TriModeTM 三模构架的P7500 系列探头系统迈出了探测方式的革命性步伐:它们是市场上唯一的解决方案,让用户不再需要使用多条探头、不断改变连接来来完成差模、单端和共模测试,而是仅仅按动按钮,就可以在这些模式中切换 …

文献编号: 51C-20874-1
白皮书
TekVPI(TM) 新型探头接口提供了杰出的通用性和简便易用性
通过推出一系列通用的、功能丰富、简便易用的新型TekVPI 探头,TekVPI (泰克通用探头接口)结构引入了下一代泰克探头接口结构。这些探头是为用于泰克最新一代DPO4000和中端DPO7000系列DPOTM示波器而设计的。

文献编号: 51C-19045-0
技术简介
使用FastFrameTM 分段存储技术
首要问题是偶发性或间歇性的事件,如激光脉冲或亚稳态事件。这些事件很难识别和检定,要求测试测量设备同时提供高采样率和长时间的数据捕获能力。这对示波器性能提出了极高的要求,在以前,我们必需在分辨率和捕获长度之间进行取舍。所有示波器的存储长度都是有限的;采样率越高,仪器存储器填充速度越快,数据采集的时间窗口越小。相反,在长时间周期内捕获数据一般需要以降低水平分辨率(采样率)为代价。当前示波器提供了高采样率和高带宽,因此现在的关键问题是优化示波器捕获信息的质量,包括:怎样以足够高的水平分辨率捕获多个事件 …

文献编号: 55W-12112-2
应用指南
了解和进行USB 2.0 物理层测试
涉及USB 2.0设备设计、检测和验证的工程师每天都面临着加快新产品开发周期的压力。通过泰克完善的系列工具,设计人员可以迅速准确地执行USB实现者论坛组织(USB-IF)推荐的所有一致性测试。通用串行总线 (USB 2.0)是一种连接规范,它面向的是计算机外部连接的外设,以消除打开计算机机箱、为某些设备安装所需板卡的麻烦。对用户来说,USB标准设备意味着易用性、扩展能力和速度。USB 2.0 设备设计人员必须正确检定设计,验证是否满足行业标准,然后设备制造商才能在包装上贴上"通过认证"的USB …

文献编号: 55W-61400-0
应用指南
调试嵌入式系统设计中的串行总线
今天,嵌入式系统几乎遍布在人类社会的每个角落。嵌入式系统可以简单定义为属于大型系统或机器一部分的一种专用计算机系统,其目的是为该系统或机器提供监测和控制服务。典型的嵌入式系统在开机时会开始运行某些专用应用,直到关闭时才会停止。当前设计和生产的几乎每个电子设备都是嵌入式系统。 了解使用泰克示波器强大的触发、解码和搜索功能怎样以极高的效率解决串行调试挑战。

文献编号: 48W-19040-21
应用指南
2016年测试测量解决方案
泰克为您提供了三种中文版产品手册,向您介绍主要行业领域中的最新相关产品信息,即测试测量解决方案、视频产品选购指南和基础仪器指南。

文献编号: 49C-19265-15
选型指南
触发基础知识-DPO7000、MSO/DPO/DSA70000系列示波器Pinpoint®/可视触发及高级搜索和标记技术
本文讨论了触发技术基础知识,以及Pinpoint触发与搜索和标记功能怎样把实时示波器中的触发技术提升到全新的水平。

文献编号: 55W-17291-6
入门手册
Tektronix Simplifies Serial Bus Debug to Drive Engineering Productivity
Rolls Out Significant Upgrades to Popular DPOJET Analysis Toolset, Enhances Serial Analysis Capabilities, Expands Automobile Industry Bus Support BEAVERTON, Ore., July 3, 2012 - As serial bus standards become faster and more complex, debug has …
新闻稿
可视触发
本技术简介讨论了在复杂的信号内部捕获关心的事件所面临的某些常见挑战,以及怎样使用可视触发功能克服这些挑战。

文献编号: 48W-27803-3
技术简介
触发基础知识
本文讨论了触发技术基础知识,以及Pinpoint触发与搜索和标记功能怎样把实时示波器中的触发技术提升到全新的水平。

文献编号: 55C-17291-6
入门手册
为抖动测量选择适当的平台
本文将阐述某些基本抖动术语,然后讨论抖动测量,以及在处理串行数据通信结构时最适合评估和量化抖动的工具。

文献编号: 37W-19858-2
技术简介
怎样最大限度地利用泰克高性能示波器
不管是设计拥有多条高速链路和接收机的串行数据通信系统,还是设计DDR存储器接口,或是设计数字视频系统,您都必需树立信心,确认正确完成自己的任务。实现这一点的唯一途径是查看部分关键信号及其相对时间关系, 另外要确认这些信号是干净的, 没有携带串扰干扰或任何其它类型的不理想特点。您还希望相当简单明了地完成波形查看、验证或调试任务,而不会影响工作,以满足约定的时间表。示波器为树立这种信心提供了最佳伴侣。DPO7000和DPO/DSA70000B系列示波器提供了大量的功能,帮助您迎接信号完整性挑战 …

文献编号: 55W-20959-1
应用指南
使用DPOPWR应用软件进行电源测量和分析
感受到压力、需要改善设计的能耗效率?不是你一个人!当今电源设计人员都面临着日益提高的压力,需要实现80%、甚至更高的功率转换效率。本应用指南介绍了泰克DPOPWR电源分析软件可以怎样帮助您满足对更长电池续航时间及“更加绿色的”设计的需求。

文献编号: 54W-23880-4
应用指南
100BASE-TX物理层一致性测试
在产品中设计和验证以太网物理层的工程师们需要迅速、可靠、高效地执行各种测试。本应用指南介绍了测试多电平信号时面临的挑战,以及装在示波器上的测试软件怎样通过多种测试(包括回波损耗)、加快的验证周期和提高的可靠性来改善效率。

文献编号: 61W-17381-3
应用指南
MSO/DPO70000/DPO7000系列示波器操作系统恢复流程
本文介绍了MSO/DPO70000/DPO7000系列示波器的操作系统恢复流程。

文献编号: 55W-29756-0
入门手册
使用泰克示波器和选配软件支持串行总线
泰克示波器提供了一系列选配的分析功能,简化了串行总线调试或一致性检验。本选型指南说明了示波器系列中每款产品支持哪些串行标准。

文献编号: 55W-29028-13
选型指南
Windows 7 Ultimate 64位SP1操作系统恢复
本文介绍了怎样恢复仪器操作系统。

文献编号: 55W-29757-0
入门手册
深入了解示波器
在阅读《深入了解示波器》介绍的概念后,您将能够初步了解示波器的基础知识和工作原理: 描述示波器的工作方式 描述各种示波器之间的差异 描述电气波形类型 了解基本示波器控制功能 进行简单的测量

文献编号: 03Z-8605-7
入门手册
MSO/DPO70000/DPO7000系列示波器入门手册
本文介绍了使用泰克MSO70000/C、DPO7000/C、DPO70000/B/C/D和DSA70000/B/C/D系列产品的最佳惯例。

文献编号: 55W-29755-0
入门手册
示波器选型指南
从基本信号校验到高性能分析,这份12页的选型指南概括介绍了泰克全系列示波器。对照表给出了高级指标和特点,指明了每个系列的示波器之间的主要差异。下载PDF了解更多

文献编号: 46W-31080-7
选型指南
使用示波器排除以太网问题
了解 10BASE-T 和 100BASE-TX 以太网物理层的基本知识,帮助您排除总线问题或相关系统问题。 了解如何在配备以太网分析功能的示波器上使用自动解码、触发和搜索功能时设置和解释结果。  

文献编号: 55W-61093-1
应用指南
如何使用 TekVISA 向我的仪器发送命令?
TekVISA 下载链接: /node/69201 为与示波器进行通信并控制示波器,可以使用 OpenChoice Talker-Listener。返回“应用程序和实用工具”面板,单击OpenChoice Talker Listener,然后单击”启动应用程序或实用工具”。系统会弹出一个新窗口,您将在此窗口中看到 4 个不同的面板:“仪器”,选择您想要与之通信的仪器;“输入命令或脚本”,输入编程命令并将其发送到仪器的字段 …
常见问题 ID69181
TekVISA是什么?我如何使用它来与我的仪器进行通信并控制仪器?
VISA 是 Virtual Instrument Software Architecture(虚拟仪器软件体系结构)的缩写形式。简言之,VISA 可处理您的计算机操作系统与仪器之间的通信。  您可能已熟悉 TekVISA。TekVISA 是泰克自己的 VISA 品牌。安捷伦和 National Instruments 也有自己的 VISA。每个 VISA 中包含通信驱动程序、USBTMC 驱动程序(USB 测试和测量类驱动程序)、VISA 软件库和文档、仪器连接管理器 …
常见问题 ID69176
如何使用仪器的程序员手册?
TekVISA 下载链接: TEKVISA CONNECTIVITY SOFTWARE 您好,欢迎使用泰克产品,今天我将介绍包含 3 个部分 TekVISA 使用指南系列的最后一个部分。我将概述程序员手册,以及如何使用它们来找到使用编程命令的正确方法。 每台示波器都附带一本程序员手册,其中包含所有可用于以编程方式控制仪器的命令。可在我们的网站 www.tek.com 上找到程序员手册。为了查找适用于我一直在使用的 MDO4104-6 的手册,我将进入我们的网站,然后在搜索栏中输入 …
常见问题 ID69186
如何下载并安装 NI LabVIEW SignalExpress Tektronix Edition 的 30 天试用版?
注意:泰克不再提供 NI LabVIEW SignalExpress Tektronix Edition。此常见问题部分“仅限用于历史记录”。 National Instruments SignalExpressTektronix Edition 是一款测量自动化工具,允许 SignalExpress 控制泰克示波器、函数发生器、数字万用表或频率计数器并进行连续自动测量。 要使用 SignalExpress,必须先下载试用版,然后在购买 SignalExpress …
常见问题 ID66221
我的示波器使用什么机架安装?
示波器系列 机架安装 TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B 无机架安装 - 皮带吊架 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 …
常见问题 ID64571
DPOJET Jitter, Noise and Eye Diagram Analysis Solution
DPOJET Jitter, Noise and Eye Diagram Analysis Solution Printable Application Help

DPOJET is a jitter, noise, timing, and eye analysis tool for Tektronix Performance Digital Oscilloscopes (DPO5000/B, MSO5000/B, DPO7000C, DPO70000C/D/DX, DSA70000C/D, MSO70000/C/DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, and DPO77002SX series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals. DPOJET revolutionized jitter analysis by adding noise analysis.
部件号: 077004828
用户
DPOJET Jitter, Noise and Eye Diagram Analysis Solution
DPOJET Jitter, Noise and Eye Diagram Analysis Solution Printable Application Help

DPOJET is a jitter, noise, timing, and eye analysis tool for Tektronix Performance Digital Oscilloscopes (DPO5000/B, MSO5000/B, DPO7000C, DPO70000C/D/DX, DSA70000C/D, MSO70000/C/DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, and DPO77002SX series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals. DPOJET revolutionized jitter analysis by adding noise analysis.


部件号: 077004827
用户
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


部件号: 077004826
用户
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


部件号: 077022411
用户
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


部件号: 077001025
程序员
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


部件号: 077004825
用户
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


部件号: 077022011
程序员
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


部件号: 077001810
用户
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


部件号: 077006315
性能验证
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


部件号: 077004823
用户
TekExpress
DisplayPort Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062106
主要用户
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


部件号: 077004822
用户
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
部件号: 077006220
联机帮助
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001023
程序员
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


部件号: 071298005
主要用户
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001022
程序员
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062105
主要用户
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


部件号: 077006314
性能验证
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
部件号: 077069300
用户
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062104
主要用户
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
部件号: 077001809
用户
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
部件号: 077125301
主要用户
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062103
主要用户
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
部件号: 071298905
用户
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001021
程序员
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
部件号: 077022410
用户
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
部件号: 077125300
主要用户
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001020
程序员
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
部件号: 077006217
联机帮助
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001019
程序员
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
部件号: 075103804
维修
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
部件号: 077006216
联机帮助
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
部件号: 077022010
程序员
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
部件号: 071298904
用户
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.
部件号: 071298903
用户
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
部件号: 077007610
维修
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062102
主要用户
TekExpress
HDM Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
部件号: 077092600
联机帮助
DDR
Analysis Online Help

DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes(DPO7000, DSA/DPO/MSO70000/B series). DDR Analysis requires Jitter and Eye Diagram Analysis Tool (Opt.DJA) and the advanced Search and Mark capability (Opt. ASM).
部件号: 077023108
联机帮助
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


部件号: 077062101
主要用户
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
部件号: 077001018
程序员
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
部件号: 077024507
解密
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
部件号: 077006214
联机帮助
016-1983-02, 016-1985-02, and 016-1988-02 and above
Rackmount Kits Instructions

This document supports installing Tektronix DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, AWG5000, and AWG7000 Series instruments in a standard 19-inch equipment rack.
部件号: 075103901
现场安装说明
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
部件号: 077022005
程序员
TekExpress
MHL Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers. The MHL solution supports test automation in the TekExpress framework providing customers with a complete solution for MHL verification, characterization, debug, and compliance.
部件号: 077062001
联机帮助
TekExpress
MHL Test Adapter Test Fixture Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
部件号: 071301300
用户
TekExpress
DisplayPort Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
部件号: 077062100
联机帮助
DPOJET- DPO-MSO5000-B, DPO7000C, DPO-DSA-MSO70000C-D-DX, DPO70000SX -V10.1.0
The DPOJET- Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164516
应用
DDRA - DDR Analysis (DPO/DSA/MSO, 5K/7K/70K B/C/D/DX/SX Series) - Win10 - V10.3.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are required …

部件号: 066189006
受访问密钥保护
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

部件号: 066186017
应用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164515
应用
DDRA - DDR Analysis (DPO/DSA/MSO, 5K/7K/70K B/C/D/DX/SX Series) - Win10 - V10.2.0
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are required …

部件号: 066189005
应用
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

部件号: 066196756
应用
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部件号: 066093812
驱动程序
HDMI2.1-eARC _v10.0.0
The Tektronix TekExpress eARC is an automated test solution for testing Enhance Audio Return Channel for 13 electrical Transmitter and 10 electrical Receiver measurements.

部件号: 066202300
应用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

部件号: 066179007
应用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

部件号: 066186016
应用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

部件号: 066186015
应用
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v10.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

部件号: 066196601
应用
TekExpress D-PHY TX Automated Solution Win7/Win10 - V10.0.2
TekExpress software with Option D-PHY TX provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.0 & v1.1 & v1.2 and the D-PHY …

部件号: 066189801
应用
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

部件号: 066186008
应用
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

部件号: 066141832
固件
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164512
应用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

部件号: 066179006
应用
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

部件号: 066166806
应用
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v1.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

部件号: 066196600
应用
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

部件号: 066180101
应用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164511
应用
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX) - V10.8.1
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.

This software …

部件号: 066141829
固件
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

部件号: 066151905
应用
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

部件号: 066170109
应用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

部件号: 066142807
应用
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164510
应用
Performance DPO Firmware for AUDIT Use Only - V10.5.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

部件号: 066170709
固件
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

部件号: 066169913
应用
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

部件号: 066179005
应用
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.1
The Tektronix DPHY Analysis solution, Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

部件号: 066190900
应用
Deployment Package for DPO7000C: V10.5.3
Deployment Package for DPO7000C.It contains the TekScope Firmware and compatible application software.This software is a self-extracting executable consisting of the main oscilloscope software version 10.5.3 and the following optional applications:1) …

部件号: 066141821
固件
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

部件号: 066142805
应用
TekExpress HEAC - DPO7000-C-DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V1.3.8
HDMI Ethernet Audio Back Channel (HEAC) which is part of HDMI 1.4a/b specifications enables networking of HDMI devices, speeds up signaling between Transmitter and Receiver devices and also provides a faster path for the audio return channel …

部件号: 066116808
应用
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

部件号: 066189001
应用
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部件号: 066093811
驱动程序
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164509
应用
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

部件号: 066170708
固件
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

部件号: 066179002
应用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

部件号: 066152505
应用
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

部件号: 066152504
应用
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

部件号: 066170705
固件
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

部件号: 066141813
固件
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

部件号: 066186000
应用
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T & 10GBASE-T) - v1.0.0
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE802.3bz, section 126, and the NBASE-T specification. This allows you to quickly and efficiently test …

部件号: 066185200
应用
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

部件号: 066126309
应用
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

部件号: 066169801
应用
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

部件号: 066140005
应用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164504
应用
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

部件号: 066172104
应用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and …

部件号: 066142803
应用
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

部件号: 066045315
驱动程序
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164503
应用
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

部件号: 066164502
应用
TDSDVI - DPO-DSA-MSO5K-7K-70K-B-C-D-DX - WinXp, Win7, Version 3.0.11
DVI developers require a reliable and easy-to-use test tool to perform in-house compliance testing. The DVI Compliance Test Solution enables faster validation cycles with automatic pass-fail testing over a comprehensive range of tests for …

部件号: 066134302
应用
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

部件号: 066177200
应用
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

部件号: 066177100
应用
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

部件号: 066142801
应用
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

部件号: 066133202
辅助功能
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部件号: 066093809
驱动程序
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

部件号: 066142101
应用
Deployment Package for DPO7KC, DPO-DSA-MSO70KC and DPO-DSA70KD Win7 series oscilloscopes V6.8.1
This software is a self-extracting executable consisting of the main oscilloscope software version 6.8.1 and the following optional applications: 1. 10G-KR Compliance, Debug, and Decode Solution, Version 6.0.1.103 2. DDRA Memory Interface …

部件号: 066141804
固件
TekExpress D-PHY TX Automated Solution DPO7000-C, DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V3.1.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on any Windows XP or Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides …

部件号: 066152200
应用
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

部件号: 066145300
应用
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

部件号: 066077407
应用
TDSPTD - DPO7254-C, DPO7354-C, DPO-DSA-MSO70000-B-C - Win XP - Win 7
The Protocol Trigger and Decode (PTD) application enables you to decode and simultaneously display protocol-level information and physical layer signaling. The PTD application includes the following features:- Simultaneously view signal, characters …

部件号: 066063709
应用
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope …
新闻稿
Understanding and Performing MIPI M-PHY Physical and Protocol Layer Testing
Review this application note for background and how to perform MIPI M-PHY testing, including Transmitter configurations and testing challenges, different signal generation requirements for Receiver testing, design validation, M-PHY protocol testing …

文献编号: 55W-28277-0
应用指南
DPO7000C Series vs. Keysight S-Series
Compares Tektronix DPO7000C Series oscilloscopes to Keysight S-Series oscilloscopes. Compares general specifications, analog-to-digital converter performance, waveform capture rate, triggering, and other features.

文献编号: 48W-60205-1
竞争
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

文献编号: 51W-60171-2
应用指南
Isolating Meta-stable Glitches in a 1.25 Gb/s Data Stream
This video compares the ability of the Tektronix DPO7000, LeCroy SDA 6020 and Agilent 54855A to use glitch triggering to isolate narrow metastable signal pulses that may exist in a design. To view the video, please select your connection speed below: …
竞争
Vector Signal Analyzer+ Spectrum Analyzer+ and Digital Oscilloscope Combination Breaks New Ground
产品文章
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
Automotive Primer: In-Vehicle Networking This primer provides an overview of the trends, challenges and solutions associated with the expected future evolution of in-vehicle networks, as well as a foundation for testing in-vehicle networks to …

文献编号: 48W-61611-0
入门手册
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

文献编号: 55W-61401-2
应用指南
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

文献编号: 48W-61617-0
速查资料
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from …

文献编号: 55T-18412-6
入门手册
SOLUTIONS FOR SCIENTIFIC AND ENGINEERING RESEARCH

文献编号: 55W_30503_2
手册
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Introduction DC-DC converters are widely used electronic components that convert DC power from one voltage level to another while regulating the output voltage. The output provides a constant voltage to a circuit, regardless of …

文献编号: 1KW-60105-2
应用指南
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
常见问题 ID62256
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
常见问题 ID69501
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
常见问题 ID62606
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
常见问题 ID60041
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
常见问题 ID55926
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
常见问题 ID64516
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
常见问题 ID64776
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
常见问题 ID470416
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
常见问题 ID66181
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
常见问题 ID64781
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
常见问题 ID467706
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
常见问题 ID471231
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
常见问题 ID64726
Do you have a detailed application note on how to use DPO7000C Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the DPO7000C Series Lab Exercise Book for more details.
常见问题 ID58171
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
常见问题 ID69386
I am trying to use RS232 communication to my scope and it is not working. What can I do to fix it?
The following is a trouble shooting guide which goes through the possible issues and how to fix them. Getting Started If you’re having communications problems between your PC and Oscilloscope this document provides the steps to help you get the …
常见问题 ID56651
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
常见问题 ID467516
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
常见问题 ID61606
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
常见问题 ID64561
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
常见问题 ID60306
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
常见问题 ID64691
What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground …
常见问题 ID64441
We are failing 10BASE-T Return Loss tests but not 100BASE-TX or 1000BASE-T tests on the same port+ yet 10BASE-T is the only one that the procedure for calibration and test refers to the use of jumper J241 on the test TF-GBE-BTP or TF-GBE-ATP fixture. What is the purpose of the jumper J241?
J241 is only required for 10BASE-T and not the other data rates. The issue arises from the fact that for 10BASE-T, the A differential pair is used for Tx, and the B differential pair is used for Rx. This is quite different from the other data rates …
常见问题 ID61071
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
常见问题 ID64756
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
常见问题 ID247211
What if my DPO/DSA 7000/70000 Oscilloscope is losing its time or date settings, or I am getting CMOS Read Error, CMOS checksum error, or CMOS Battery Failure messages?
You may need to change the CMOS battery on the motherboard.  Refer to attached instructions for changing the battery and resetting the CMOS. Refer to the respective instrument service manual for instructions how to gain access to the instrument …
常见问题 ID72171
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
常见问题 ID69266
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
常见问题 ID780986
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
常见问题 ID474266
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
常见问题 ID56226
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
常见问题 ID63266
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
常见问题 ID468146
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
常见问题 ID58571
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
常见问题 ID64766
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
常见问题 ID58421
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
常见问题 ID66226
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常见问题 ID64791
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
常见问题 ID59621
What are some best practices that I should use when operating a Tektronix MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, or DSA70000/B/C/D oscillosope?  
You can refer to our Best Practices guide at: www.tek.com/dl/81W_23825_1.pdf Included in the guide is information regarding the following subject areas: Preventing Electrostatic Discharge Signal Path Compensation and instrument …
常见问题 ID69171
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
常见问题 ID782296
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
常见问题 ID64826
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
常见问题 ID63516
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
常见问题 ID64761
DPO7000: Can the GPIP interface port be used to control other instruments?
Yes. The scope can be a GPIB Device or it can be used as a Host to control other GPIB devices. 
常见问题 ID55441
Can DPO7104/DPO7104C option 2SR be field-installed?
No – it is hardware option that can be added ONLY at time of initial scope order
常见问题 ID55241
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
常见问题 ID471576
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
常见问题 ID55921
DPO7000: Can memory be added later if I buy the scope with standard memory length?
Yes. Memory can be upgraded later. Field upgrade kits are available. Order DPO-UP with the following optionsOpt. RL02Record length upgrade from 12.5M samples/ch  to 25M samples/chOpt. RL05Record length upgrade from 12.5M samples/ch  to 50M …
常见问题 ID55436
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
常见问题 ID64751
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
常见问题 ID64796
Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?
The P7700 Series TriMode Probes are compatible with all DSA DPO MSO 70000 Series real-time oscilloscopes running Windows 7 or Windows 10 and firmware version 10.6 or higher. Oscilloscopes capable of these requirements include the following: · …
常见问题 ID255371
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
常见问题 ID56016
Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip …
常见问题 ID58111
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
常见问题 ID782291
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
常见问题 ID60156