下载
下载
下载手册、产品技术资料、软件等：
联系我们
联系我们
与泰克代表实时聊天。 工作时间：上午 6:00 - 下午 4:30（太平洋标准时间）。
特点 | 优势 |
电气模块信号测量精度：
| <100 fs 本底抖动允许对高位速率（40 和 100 (4´25) Gb/s）设备进行检定，典型 <5% 的信号单位间隔由测试仪器所使用。70 GHz 带宽允许对高位速率信号进行完整检定（数据速率 28 Gb/秒的 5 阶谐波和数据速率 >45 Gb/秒的 3 阶谐波）。 |
在所有带宽上实现业内较低的系统噪声：
| 较大程度降低仪器在采集高位速率、低幅度信号时的噪声量，避免可能带来附加抖动和眼图闭合的其他噪声。 |
| 单台主机内最多 6 个通道同时采集 <100 fs 抖动。 | 多个差分通道的高保真采集可进行通道间损伤测试，提高多个高速串行通道系统的测试吞吐量。 |
| 光模块支持从 155 Mb/s 到 100 Gb/s (4x25) 以太网所有标准速率的光一致性测试。 | 为单模和多模光标准提供经济实惠、功能多样的光测试系统，从 155 Mb/s (OC3/STM1) 到 40 Gb/s（SONET/SDH 和 40GBase 以太网）和 100 Gb/s 以太网（100GBase-SR4、-LR4 和 ER4），波长 850、1310 和 1550nm。 |
| 优异的采集吞吐量，采样率最高 300 kS/s。 | 通过优异的系统吞吐量，可将制造或设备检定测试时间缩短 4 倍。 |
| 能够将采样器放到被测设备 (DUT) 的附近。 | 远程采样头较大程度降低因 DUT 至仪器之间的电缆和夹具造成的信号劣化，简化测试系统的反嵌。 |
| 独立的已校准通道相差校正。 | 双通道模块中具有集成的已校准通道相差校正，消除时滞，增强多通道测量的信号保真度。 |
| 型号 | 模拟带宽 | 采样率 | 记录长度 | 模拟通道 | 报价 |
|---|---|---|---|---|---|
| DSA8300 | 70 GHz 电接口，80 GHz 光接口 | 最大 300 kS/s | 50 点 - 16,000 点（IConnect® 为 1M 点，80SJNB 为 10M 点） | 取决于使用的采样模块，最多8条通道 | 配置和报价 |
价格：价格如有变更，恕不另行通知。
| 型号 | 模拟带宽 | 采样率 | 记录长度 | 模拟通道 | 报价 |
|---|---|---|---|---|---|
| DSA8300 | 70 GHz 电接口，80 GHz 光接口 | 最大 300 kS/s | 50 点 - 16,000 点（IConnect® 为 1M 点，80SJNB 为 10M 点） | 取决于使用的采样模块，最多8条通道 | 配置和报价 |
价格：价格如有变更，恕不另行通知。
| 产品技术资料 | 软件包 / 软件选件 | 描述 | 配置和报价 |
|---|
| 产品技术资料 | 模块 | 描述 | 配置和报价 |
|---|---|---|---|
| 查看产品技术资料 | 80E07B | 8000 系列，双通道，30 GHz，远程电采样模块（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80N02 | 8000 Series Electrical Sampling Module Extender, 2M Cable | 配置和报价 |
| 查看产品技术资料 | 82A04B | 8000 系列，相位参考模块（包括 D1） | 配置和报价 |
| 查看产品技术资料 | 80E11X1 | 8000 系列，单通道，70 GHz，超低抖动，电采样模块（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80E10B | 8000 系列，双通道，50 GHz，远程电采样模块，带 TDR（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80E08B | 8000 系列，双通道，30 GHz，远程电采样模块，带 TDR（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80E09B | 8000 系列，双通道，60 GHz，远程电采样模块（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80C21 | 8000 系列光模块：双通道，53 GHz 光带宽，单模，1200nm - 1650nm |
配置和报价 |
| 查看产品技术资料 | 80C17 | 8000 系列光模块：单通道，30GHz 光带宽，单/多模，800nm ~ 1600nm | 配置和报价 |
| 查看产品技术资料 | 80C14 | 14+ GHz，宽波长，放大光采样模块 | 配置和报价 |
| 查看产品技术资料 | 80E11 | 8000 系列，双通道，70 GHz，超低抖动，电采样模块（包含 D1） | 配置和报价 |
| 查看产品技术资料 | 80E03 | 采样模块；双，20GHZ 电采样模块 - 可追溯校准标准证明 | 配置和报价 |
| 查看产品技术资料 | 80C08D | 单通道光采样模块；10G 光参考接收机滤波器；12 GHz 光宽带；单模/多模 | 配置和报价 |
| 查看产品技术资料 | 80C12B | 12 GHz，宽波长，放大光采样模块 | 配置和报价 |
| 查看产品技术资料 | 80C18 | 8000 系列光模块：双通道，30GHz 光带宽，单/多模，800nm ~ 1600nm | 配置和报价 |
| 查看产品技术资料 | 80C15 | 8000 系列光模块：单通道，32GHz 光带宽，单/多模，800nm ~ 1600nm | 配置和报价 |
| 查看产品技术资料 | 80C07B | 光采样模块；2.488 GB/S OC48/STM16，2.500 GB/S 2GBE，2.500 GB/S 无限带宽；2.5 GHZ 光带宽 | 配置和报价 |
| 查看产品技术资料 | 80C11B | 单通道光采样模块；10G 光参考接收机滤波器；28 GHz 光宽带；单模 | 配置和报价 |
| 查看产品技术资料 | 80A02 | EOS/ESD 保护模块，用于泰克电采样模块的静电隔离；本产品包含一致性声明 | 配置和报价 |
| 查看产品技术资料 | 80C10C | 单通道，65/80 GHz 光采样模块（必须指定 F1、F2 或 F3 中的一个选件） | 配置和报价 |
| 查看产品技术资料 | 80E04 | 采样模块；双，20GHZ 带 TDR 电采样模块 - 可追溯校准标准证明 | 配置和报价 |
| 查看产品技术资料 | 80C20 | 8000 系列光模块：单通道， 53 GHz 光带宽，单模，1200nm - 1650nm |
配置和报价 |
|
DSA8300 Oscilloscope Firmware for Windows 7 - V6.6.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.6.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.6.2.0, TekVisa v4.0.0.84, and Clock Recovery application v10.11 …
部件号： 066133313 |
固件 | |
|
DSA8300 产品技术资料
DSA8300 是一款先进的等效时间采样示波器，为通信信号分析、串行数据网络分析以及串行数据链路分析应用提供业内领先的保真测量和分析功能。
文献编号： 85C-26988-21 |
Datasheet | |
|
DSA8300 and 80A00, 80C00, 80E00, 80N01, 80X00, 82A00 Sampling Modules
Declassification and Security
This document includes information that is necessary to clear or sanitize the DSA8300 product and related sampling modules so it can be removed from a secured area, such as when returning the product for repair. 部件号： 077057604 |
解密 Manual | |
|
DSA8300 and 80A00, 80C00, 80E00 Sampling Modules
Performance Verification
Supports DSA8300 TekScope Application Software 6.3.1.x and above. This document describes the performance verification procedures for the DSA8300 Digital Serial Analyzer and supported electrical, optical, and accessory sampling modules. 部件号： 077068205 |
性能验证 Manual | |
|
DSA8300 Digital Serial Analyzer, 80C00/80E00/80A00 modules
Specifications
This document lists the warranted and typical specifications for the DSA8300 Digital Serial Analyzer, 80C00 Series Optical Sampling Modules, 80E00 Series Electrical Sampling Modules, and 80A00 Modules. 部件号： 077057105 |
性能验证 Manual | |
|
DSA83UP
Upgrades for DSA8300 Instrument
This kit provides upgrade instructions for the DSA8300 Digital Serial Analyzer instrument. The kit includes the instrument application software, documentation (as PDF files), and a hard disk drive assembly if ordered with option HDD8. 部件号： 075103703 |
现场安装说明 Manual | |
|
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Help file (PDF)
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version of 80SJNB is for use with the DSA8300 Digital Signal Analyzer oscilloscope. 部件号： 077064105 |
主要用户 Manual | |
|
DSA8300
Printable Application Help
Supports TekScope version 6.3.1.X and greater. This PDF file is a printable version of the DSA8300 Digital Serial Analyzer TekScope application help content. 部件号： 077056904 |
联机帮助 Manual | |
|
DSA8300
Digital Serial Analyzer
Supports DSA8300 TekScope SW version 6.3.1.X and later. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope. 部件号： 077057006 |
程序员 Manual | |
|
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Help file (PDF)
Online Help
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version of 80SJNB is for use with the DSA8300 Digital Signal Analyzer oscilloscope. 部件号： 077064104 |
主要用户 Manual | |
|
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Printable Online Help
Online Help
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version of 80SJNB is for use with the DSA8300 Digital Signal Analyzer oscilloscope. 部件号： 077064103 |
主要用户 Manual | |
|
80SJNB
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version of 80SJNB is for use with the DSA8300 Digital Signal Analyzer oscilloscope. 部件号： 077064102 |
主要用户 Manual | |
|
DSA8300
Performance Verification Technical Reference
This document lists the performance verification procedures for the DSA8300 mainframe instrument as well as for the 80AXX, 80CXX, and 80EXX sampling modules. 部件号： 077068200 |
性能验证 Manual | |
|
DSA8300
Digital Serial Analyzer and Modules
Service Manual
This document describes adjustments, troubleshooting, and repair procedures, including exploded views and replaceable parts lists. 部件号： 077057201 |
维修 Manual | |
|
DSA8300 CEI-VSR
Application software instructions, printed
Online Help
This document is a PDF version of the TekExpress CEI-VSR help system. It contains installation and operatating information for product, which provides an automated, simple, and efficient way to test CEI-VSR Host to Module and Module to Host Interfaces to the requirements of the CEI-VSR specifications. 部件号： 077087200 |
联机帮助 Manual | |
|
80SJNB
Jitter, Noise, BER, and Serial Data Link Analysis Software for DSA8300; Printable Online Help
Online Help
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version of 80SJNB is for use with the DSA8300 Digital Signal Analyzer oscilloscope. 部件号： 077064101 |
主要用户 Manual | |
|
DSA8300 and Sampling Modules
Performance Verification
Technical Reference
Supports DSA8300 TekScope application 6.1.X and greater. This document lists the performance verification procedures for the DSA8300 mainframe instrument and supported optical and electrical sampling modules. 部件号： 077068202 |
性能验证 Manual | |
|
80X01 and 80X02
Electrical Sampling Module Extender
Instructions
These instructions describe how to install the 80X01 (1 meter) or 80X02 (2 meter) module extender cable. For use with 80E01, 80E02, 80E03, 80E04, 80E06, 82A04B, 80E11, and 80E11X1 electrical sampling modules. 部件号： 071320600 |
现场安装说明 Manual | |
|
DSA8300 Digital Serial Analyzer
Practices for Measurements on 25 Gb/s Signaling
Application Note
Other
Describes how to use the Tektronix DSA8300 Digital Serial Analyzer to take 25 Gb/s measurements supporting the 802.3bm 100GBASE-KR4 backplane standard. 部件号： 071320701 |
培训/教程 Manual | |
|
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software
Installation Manual
For DSA8300 TekScope release 6.2.1.X and greater. Instructions to install TekScope application and related software on the DSA8300 Digital Serial Analyzer sampling oscilloscope. 部件号： 071289804 |
现场安装说明 Manual | |
|
DSA8300
Digital Serial Analyzer
Programmer Manual
Supports DSA8300 TekScope SW version 6.3.1.X and later. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope. 部件号： 077057003 |
程序员 Manual | |
|
DSA8300
Printable Application Help
Online Help
Supports TekScope version 6.3.1.X and greater. This PDF file is a printable version of the DSA8300 Digital Serial Analyzer TekScope application help content. 部件号： 077056903 |
联机帮助 Manual | |
|
DSA8300 Series
Digital Serial Analyzer
Quick Start User Manual
This document supports DSA8300 TekScope application 6.3.X. This document describes the installation and basic operation concepts of the DSA8300 Digital Serial Analyzer. 部件号： 071289703 |
主要用户 Manual | |
|
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software
Installation Manual
For DSA8300 TekScope release 6.2.1.X and greater. Instructions to install TekScope application and related software on the DSA8300 Digital Serial Analyzer sampling oscilloscope. 部件号： 071289803 |
现场安装说明 Manual | |
|
DSA8300
Instrument software restore instructions
Read This First
For DSA8300 instruments with serial number C040000 (GSA serial number B020000) and later. This document describes how to restore (rebuild) the operating system and application software on the DSA8300 Digital Serial Analyzer hard drive. 部件号： 071316200 |
现场安装说明 Manual | |
|
DSA8300 Digital Serial Analyzer
TekScope and Connectivity Software
Installation Manual
Supports DSA8300 TekScope release 6.2.X. This document describes how to install TekScope application and other software on the DSA8300 Digital Serial Analyzer sampling oscilloscope. 部件号： 071289802 |
现场安装说明 Manual | |
|
80A00 and 82A00 Series
Sampling Modules
Read This First
Supports TekScope version 6.2.x (DSA8300), 5.2.x (DSA8200). This document describes installation procedures and software compatibility information for the 80A00 and 82A00 Modules for the DSA8300 and legacy TDS/CSA/DSA8X00 series instruments. 部件号： 071138613 |
用户 Manual | |
|
DSA8300
Printable Online Help
Online Help
Supports TekScope version 6.2.X and greater. This PDF file is a printable version of the DSA8300 Series online help content. 部件号： 077056902 |
联机帮助 Manual | |
|
DSA8300, CSA/DSA/TDS8000 Series
Differential Channel Alignment Application
Online Help
Supports TekScope SW V6.2 (DSA8300), V5.2 (CSA/TDS/DSA8200). The Differential Channel Alignment application aligns channel acquisition and TDR step, and calibrates channel delay and TDR step deskew, for supported 80E00 series electrical sampling modules. 部件号： 077077500 |
联机帮助 Manual | |
|
DSA8300
Digital Serial Analyzer
Programmer Manual
Supports DSA8300 TekScope SW version 6.2.X and later. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope. 部件号： 077057002 |
程序员 Manual | |
|
DSA83UP
Upgrades for DSA8300 Instrument
Instructions
This kit provides upgrade instructions for the DSA8300 Digital Serial Analyzer instrument. The kit includes the instrument application software, documentation (as PDF files), and a hard disk drive assembly if ordered with option HDD8. 部件号： 075103702 |
现场安装说明 Manual | |
|
DSA8300 and Sampling Modules
Performance Verification
Technical Reference
Supports DSA8300 TekScope application 6.1.X and greater. This document lists the performance verification procedures for the DSA8300 mainframe instrument and supported optical and electrical sampling modules. 部件号： 077068201 |
性能验证 Manual | |
|
DSA8300
Printable Online Help
Online Help
Supports TekScope version 6.1.X and greater. This PDF file is a printable version of the DSA8300 Series online help content. 部件号： 077056901 |
联机帮助 Manual | |
|
DSA8300
Digital Serial Analyzer
Programmer Manual
Supports DSA8300 TekScope SW version 6.1.X. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope. 部件号： 077057001 |
程序员 Manual | |
|
DSA8300
Specifications
Technical Reference
This document lists the warranted and typical specifications for the DSA8300 mainframe instrument as well as for the 80AXX, 80CXX, and 80EXX sampling modules. 部件号： 077057100 |
性能验证 Manual | |
|
DSA83UP
Upgrades for DSA8300 Instrument
Instructions
This kit provides upgrade instructions for the DSA8300 Digital Serial Analyzer instrument. The kit includes the instrument application software and documentation (as PDF files). 部件号： 075103701 |
现场安装说明 Manual | |
|
DSA8300 Digital Serial Analyzer and Modules
Sampling Oscilloscope Service Manual
This document describes adjustments, troubleshooting, and repair procedures, including exploded views and replaceable parts lists. 部件号： 077057200 |
维修 Manual | |
|
DSA8300
Digital Serial Analyzer Microsoft Windows 7 Operating System Restore
Instructions
This document describes how to restore the Microsoft Windows 7 Ultimate (32 bit) operating system software on a Tektronix DSA8300 Digital Serial Analyzer intrument. 部件号： 071289900 |
现场安装说明 Manual | |
|
DSA8300 Series, Rev A
Digial Serial Analyzer Declassification and Security
Instructions
This document includes information that is necessary to clear or sanitize the DSA8300 product so it can be removed from a secured area, such as when returning the product for repair. 部件号： 077057600 |
解密 Manual | |
|
DSA8300 Series
Digital Serial Analyzer
Quick Start User Manual
This manual describes the installation and operation of the DSA8300 Digital Serial Analyzer along with basic operation and concepts. 部件号： 071289700 |
主要用户 Manual | |
|
100G-TXE - IEEE-802.3bj:CR4/KR4 and IEEE-802.3bm:CAUI4 Transmitter Compliance Solution for DSA8300 - V1.0.1.96
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.
部件号： 066190501 |
应用 | |
|
400G-M4 PAM4 Optical Manufacturing TDECQ Analysis Software for Tektronix DSA8300 - V1.1.0.12
PC based analysis software package provides up to 4 channel support enabling higher throughput rates through parallel channel acquisition and processing. Features in the DSA8300 400G-M4 Analysis include:? Support for 4 channel simultaneous …
部件号： 066134770 |
应用 | |
|
CEI-VSR - OIF CEI 3.1 Compliance Solution for DSA8300 - V1.3.1.160
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.1 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4)CEI-VSR
部件号： 066172601 |
应用 | |
|
400G-TXO support IEEE 802.3bs and 802.3cd: 50GBASE-FR/LR, 100GBASE-DR, 200GBASE-DR4/ LR4/FR4 and 400GBASE-LR8/FR8/DR4 Optical Conformance and Characterization Solution for DSA8300 V 1.0.2
The 400G-TXO application package is an automated conformance and characterization solution for IEEE 802.3bs and IEEE 802.3cd specifications. This package operates on DSA8300 sampling instrument with 80C10C optical module. The 80S400G-TXO offers a …
部件号： 066191901 |
应用 | |
|
TekExpress RIN Automated Measurement Solution Software Application - V1.1.2
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals.-RIN and RINxOMA measurements can be performed on PRBS7, PRBS9,PRBS11 …
部件号： 066181602 |
应用 | |
|
100GBASE-SR4 and TDEC Measurement Solution for DSA8300 - V1.1.2
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach EthernetSpecifications outlined in IEEE 802.3bm.
部件号： 066179403 |
应用 | |
|
80SJNB, 80SJARB, SDLA Visualizer and Scope Noise Characterization Application Software Release - V4.5.9.0, V4.0.4.0, V2.2.0.4, V 1.0.0.64
80SJNB, 80SJARB, SDLA Visualizer, and Scope Noise Characterization software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds updates to TDECQ measurements in support of 100 to 400 Gbps, PAM4 signal analysis …
部件号： 066134713 |
应用 | |
|
NRZ-M4 Optical Manufacturing TDEC Analysis Software for Tektronix DSA8300 - V1.1.0.37
Tektronix NRZ-M4 is a PC based application which offers optical NRZ signaling analysis, including TDEC(Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use …
部件号： 066199900 |
应用 | |
|
80SJNB, 80SJARB and SDLA Visualizer Application Software Release - v4.3.2.0 and v4.0.4.0 and V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds a TDECQ option in support of 100 – 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and …
部件号： 066134710 |
应用 | |
|
400G-TXO support IEEE 802.3bs and 802.3cd: 50GBASE-FR/LR, 100GBASE-DR, 200GBASE-DR4/ LR4/FR4 and 400GBASE-LR8/FR8/DR4 Optical Conformance and Characterization Solution for DSA8300 – V 1.0.0
The 400G-TXO application package is an automated conformance and characterization solution for IEEE 802.3bs and IEEE 802.3cd specifications.
This package operates on DSA8300 sampling instrument with 80C10C optical module. The 80S400G-TXO offers a …
部件号： 066191900 |
应用 | |
|
DSA8300 Oscilloscope Firmware for Windows 7 - V6.5.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.5.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, and Clock Recovery application v10.11 …
部件号： 066133312 |
固件 | |
|
80SJNB, 80SJARB and SDLA Visualizer Application Software Release - V4.2.6.0 - V4.0.4.0 - V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System.
This release of 80SJNB adds a TDECQ option in support of 100 – 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and …
部件号： 066134709 |
应用 | |
|
100GBASE-SR4 and TDEC Measurement Solution for DSA8300, V1.0.1
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach Ethernet
Specifications outlined in IEEE 802.3bm.
TekExpress 100GBASE-SR4 / TDEC …
部件号： 066179401 |
应用 | |
|
100G-TXE - IEEE-802.3bj:CR4/KR4 and IEEE-802.3bm:CAUI4 Transmitter Compliance Solution for DSA8300 - V1.0.0
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.
- TekExpress 100G-TXE Compliance solution provides 10 free trials by default and need …
部件号： 066190500 |
应用 | |
|
80SJNB, 80SJARB and SDLA Visualizer Application Software Release V4.1.31.0, V4.0.2.0 and V2.2.0.4
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System.
The purpose of this new versions, V4.1.31.0, of 80SJNB, Jitter, Noise, BER and Serial Data Link Analysis software is to enhance the …
部件号： 066134708 |
应用 | |
|
DSA8300 Oscilloscope Firmware for Windows 7 V6.4.1.1
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.4.1.1 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, and Clock Recovery application v10.11 …
部件号： 066133311 |
应用 | |
|
TekExpress RIN Automated Measurement Solution Software Application, V1.0.1
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals.
-RIN and RINxOMA measurements can be performed on PRBS7, PRBS9,PRBS11 …
部件号： 066181600 |
应用 | |
|
80SJNB JITTER, NOISE, and BER ANALYSIS V4.0.8.0, 80SJARB V4.0.2.0, and SDLA Visualizer 2.2.0
80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System.The purpose of this new versions, V4.0.8.0, of 80SJNB, Jitter, Noise, BER and Serial Data Link Analysis software is to enhance the …
部件号： 066134707 |
应用 | |
|
100GBASE-SR4 and TDEC Measurement Solution for DSA8300, V1.0.0
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach Ethernet
Specifications outlined in IEEE 802.3bm.
TekExpress 100GBASE-SR4 / TDEC …
部件号： 066179400 |
应用 | |
|
DSA8300 Oscilloscope Firmware for Windows 7 V6.3.1.5
This release is for DSA8300 series instruments with Windows 7 Operating System. This software will install v6.3.1.5 Oscilloscope Firmware, Differential Channel Alignment application v1.4.3, TekVisa v4.0.0.84, Clock Recovery application v10.11, and …
部件号： 066133310 |
固件 | |
|
Serial Data Link Analysis Visualizer, DSA8300 JNB02, V2.2.0
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, and cables, allowing visibility of the true circuit behavior.Simulation circuits can be embedded with user …
部件号： 066168400 |
应用 | |
|
TekExpress RIN Automated Measurement Solution Software application v1.0.0
TekExpress RIN Automated Measurement Solution Software application v1.0
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals …
部件号： 066165900 |
应用 | |
|
CEI-VSR - OIF CEI 3.0 Compliance Solution for DSA8300
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.0 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4)
CEI-VSR
- TekExpress CEI-VSR Compliance solution provides 10 free trials by default …
部件号： 066161501 |
应用 | |
|
Tektronix Helps Intel Break the 20 Gbps Cable Barrier Resulting in World’s Fastest and Longest Infiniband Cables
Challenge - To help Intel develop and evaluate a new generation of 20 Gbps Infiniband optical cables for scaling out advanced computer clusters to distances of up to 100 metres. Solution - A Tektronix AWG7102 arbitrary waveform generator is used to …
文献编号： 46W 21292 01 |
成功案例 Marketing Document | |
|
Tests Show That Optical Infiniband Cable Performance Exceeds Copper
|
技术简介 Marketing Document | |
|
Tektronix unveils fastest scope probe yet
|
产品文章 Marketing Document | |
|
Two good test probes are all you need
|
技术简介 Marketing Document | |
|
System Extends InfiniBand Cable Reach To 100 m
|
产品文章 Marketing Document | |
|
Sequential-sampling scopes+ TDR challenge VNAs
|
产品文章 Marketing Document | |
|
Finding and Examining Pattern-dependent Failures with FrameScan™ Acquisition Technology
As bit rates increase to 10 Gbps and beyond, pattern-dependent failures become much more common in the generation, transmission, and reception of signals in various data and communication products and systems. Unfortunately with traditional test …
文献编号： 85W-13561-2 |
应用指南 Marketing Document | |
|
Fast probe enhances advanced four-channel oscilloscopes
|
产品文章 Marketing Document | |
|
Tektronix Introduces Optical Modules with Industry’s Highest Sensitivity, Lowest Noise
New Modules for DSA83000 Sampling Oscilloscope Increases Production Yields for 100G Designs; Tektronix adds comprehensive 400G PAM4 TDECQ Measurement_____BEAVERTON, Ore. March 21, 2017 - Tektronix, Inc., a leading worldwide provider of measurement …
|
新闻稿 Marketing Document | |
|
Case Study: Altera Finds Performance Validation of High-speed+ Configurable FPGA Required Flexible+ Power Test Instrument
Read this customer testimonial from Altera on the performance of the CSA8200 sampling oscilloscope.
文献编号： 85W-19870-1 |
速查资料 Marketing Document | |
|
Ultra-low Jitter Performance with Phase-Reference Module 82A04 & TDS/CSA8200 Sampling Oscilloscope
文献编号： 85W-18385-0 |
应用指南 Marketing Document | |
|
SOLUTIONS FOR SCIENTIFIC AND ENGINEERING RESEARCH
文献编号： 55W_30503_2 |
手册 Marketing Document | |
|
Test methodologies for high-speed serial designs
|
产品文章 Marketing Document | |
|
Analyzer modules provide complete 40/100-Gbit/s test solution
|
产品文章 Marketing Document | |
|
Performing RIN and RIN OMA Measurements on the DSA8300 Sampling Oscilloscope
Detailed information on the measurement of the RIN OMA for the purpose of 10 Gb/s Ethernet, IEEE 802.3ae and similar specifications is presented, using a Tektronix DSA8300 Sampling Oscilloscope.
文献编号： 85W-30657-0 |
应用指南 Marketing Document | |
|
Effects of Infiniband Fixture Crosstalk on Synthesized Eye Diagram
In working with Infiniband designs, the crosstalk that is created by attached fixtures may result in inaccurate eye diagram representation. This application note will take you through the process of de-embedding fixture crosstalk from synthesized …
文献编号： 61W-19673-0 |
应用指南 Marketing Document | |
|
Eye Measurements on Optical RZ Signals
This technical brief describes several automatic eye measurements for RZ signals contained in Tektronix' DSA8200 sampling oscilloscope. Examples of real signals are presented, as well as guidelines to ensure valid test results. A method of building …
文献编号： 85W-15764-0 |
技术简介 Marketing Document | |
|
2020 Tektronix and Keithley Product Catalog
We have the right products to ensure your success. Browse our new Tektronix and Keithley Product Catalog and explore our complete line of test and measurement solutions. You’ll find over 130 pages of key product details and specifications …
|
选型指南 Marketing Document | |
|
HDMI/DVI Method Of Implementation (MOI)
This document is the Procedures Guide for HDMI Sink Instruments Differential Impedance Measurements using the Tektronix TDS/DSA8200 and Sampling Module 80E04.
|
实现方法 Marketing Document | |
|
Next-Gen App Performs HDMI Compliance Tests
|
产品文章 Marketing Document | |
|
Can I load my DSA8200 set up files into a DSA8300?
Yes, there is setup file conversion utility for the 8000 series sampling scopes. Below is an extract from the Readme file for the current 8300 scope firmware download:The 6.2 and later product software media contains an independentutility application …
|
常见问题 ID69336 Faq | |
|
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals. The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals. Creating an eye diagram in DPOJET is easy and can be …
|
常见问题 ID467706 Faq | |
|
I have DSA8200 and a 80C15. However the DSA8200 does not appear to recognize the 80C15. Does the DSA8200 support the 80C15?
Yes the DSA8200 supports the 80C15 if the DSA8200 has firmware version V5.2.1.2 or later.
|
常见问题 ID247201 Faq | |
|
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
|
常见问题 ID69501 Faq | |
|
Is the 80A06 compatible with the DSA8300?
The 80A06 is not compatible with the DSA8300.
|
常见问题 ID69526 Faq | |
|
What do I do if the 80A03 does not recognize my P7380 probes (the LED stays red)?
If the firmware version (listed on the back of the 80A03) is v1.0, then the 80A03 needs a firmware upgrade. With the latest firmware v2.3, the 80A03 will recognize all P7000-series probes available at the time. The firmware upgrade is not customer …
|
常见问题 ID64491 Faq | |
|
How do I verify which TekScope application software version supports a specific sampling module or is appropriate for the version of Microsoft Windows loaded on the Sampling scope mainframe?
Click Help > About in the TekScope application to show the current software version.
Use the following tables with the attached document to find the product software version required for your module and instrument.
If you need to download a newer …
|
常见问题 ID64601 Faq | |
|
Is it possible to use the 80E01 and 80E06 electrical sampling modules with the 80A03?
Yes, however there are limitations. Some of them are:The SMA adaptor (2.41/1.85mm t 2.92mm) will need to be used.With the SMA adaptors on the input connector, the provided semi-rigid cable will not fit. A custom cable (not available from Tektronix) …
|
常见问题 ID64471 Faq | |
|
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
|
常见问题 ID61606 Faq | |
|
There is a check box which states: Start service at system power-up. I check the box but at next power on the box is unchecked and does not restart. How to make it stay checked?
Use the Window 7 search box and for search criteria us "User", select “Change User Account control Settings” Now run the bar all the way to the bottom (Never Notify) and reboot the scope.Now in VXI-11 server properties check “Start Server at System …
|
常见问题 ID64746 Faq | |
|
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.
K4000 K420 K475 More information can …
|
常见问题 ID64561 Faq | |
|
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS. It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications in the …
|
常见问题 ID69346 Faq | |
|
What is the bandwidth of the 80A03?
The bandwidth of the 80A03 is depended on the serial number. Bandwidth is DC to 12.5GHz for serial numbers up to B020423 and 18GHz typical for serial numbers B020424 and higher. These are nominal specification. The 18GHz units should have decent …
|
常见问题 ID64496 Faq | |
|
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications.
Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
|
常见问题 ID69266 Faq | |
|
How do I upgrade the 80A03 firmware?
The firmware upgrade is not customer-installable. The 80A03 must be upgraded at a Tektronix Service Center. To locate the service center near you, please refer to our website at http://www.tek.com/home/contact/ or call 800-833-9200 option 2 for our …
|
常见问题 ID64456 Faq | |
|
CSharp Extract Trigger Timestamp from .wfm File_使用CSharp分析wfm波形_读取触发时间
本例程提供了基本使用C#分析示波器采集的波形WFM数据，并读取触发的时间位置；程序会读取目录下所有的wfm文件，并且输出每一个wfm中触发的时间。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
用于测量 PCB 质量验证的串扰的时域法应用指南
本应用指南讨论各种串扰因素，并演示如何使用 TDS8200 系列采样示波器或 CSA8200 系列通信信号分析仪来测量单层 PCB 上的串扰。
文献编号： 85W-16643-0 |
应用指南 Marketing Document | |
|
远程探头采集改善高速串行测量
随着高速串行数据速率不断提高，使测量余量达到最大的需求也在提高。即使质量非常好的同轴电缆也会影响测量余量。示波器远程探头提供了明显的优势，可以使信号完整性测量的余量达到最大。
文献编号： 55W-29580-0 |
应用指南 Marketing Document | |
|
泰克接收机测试解决方案
接收机测试给需要执行测试和检定新兴设备的设计人员带来了一个最大挑战。根本问题是"接收机在实际环境条件下是否会正确工作？"及"最坏情况下的行为是什么？"
文献编号： 76W-21670-2 |
速查资料 Marketing Document | |
|
FB-DIMM一致性和故障排除解决方案
本应用速查资料快速查看迎接FB-DIMM设计挑战可以使用的工具。看一下吧。
文献编号： 55C-18686-0 |
速查资料 Marketing Document | |
|
泰克抖动测量2.0 解决方案
抖动会劣化系统性能，如果您没有时间捕捉抖动，那么抖动就会影响调试工作。现在，任何高速设计都必须处理抖动，许多串行数据标准也要求进行全面抖动测试。抖动检定涉及复杂的信号分析，测量需求有的很简单，有的则非常复杂。发射机与信道之间的交互要求全面进行串行数据链路分析。不管您的具体要求是什么，泰克都使您能够迅速高效地解决设计挑战。
文献编号： 55T-17692-3 |
速查资料 Marketing Document | |
|
案例分析: 飞思卡尔半导体使用Tektronix IConnect®软件为发射机建模
挑战 飞思卡尔半导体制定了一种不同于发射机建模通常所用方法的新方法。只用一个端口（TDR）给发射机建模，且假定封装和基板传输线无损。解决方案与传统建模形式不同，用Tektronix DSA8200数字信号分析仪、80E08 TDR模块和IConnect软件实施的建模被证明非常成功。Iconnect软件可帮助根据测得的TDR数据创建可见图形，同时找出其与实际测得的眼波的对应关系。优势IConnect软件的使用已使飞思卡尔半导体能直接从测量结果中提取封装的非连续性特征。除给封装建模外 …
文献编号： 85W-25199-0 |
技术简介 Marketing Document | |
|
Semtech 转为采用泰克 DSA8300 采样示波器检定新 25-28 Gb/s CDR 设备
该客户案例研究展示了 Tektronix DataCom 测试解决方案为检定 100G 技术的电气性能带来的优势，并且该解决方案具有业界最低的本底噪声。
文献编号： 85W-60024-0 |
成功案例 Marketing Document | |
|
《超低驱动电压硅行波调制器》（美国光学学会）
硅平台正逐渐成为用于集成光子学的商业平台。如要直接与片上电子设备集成，需使用 1 Vpp 或更低的驱动电压。
根据来自美国光学学会的此文章，DSA8300 系列示波器正用于验证宽带调制器在 20 Gb/s 速率时（驱动电压为 0.63 Vpp）的操作。
文献编号： Optics Express, Vol. 20, Issue 11, pp. 12014-12020 (2012) |
技术简介 Marketing Document | |
|
泰克推出HDMI 2.0一致性测试及调试解决方案
新测试解决方案支持新“4K”视频监视器技术，帮助获得快速、一致和准确的结果中国 北京，2014年6月16日 —全球示波器市场的领导厂商---泰克公司日前宣布，其提出的一种新的实现方法 （MOI）被HDMI论坛批准为针对最近发布的HDMI 2.0标准的官方一致性测试解决方案，该方法采用全自动一致性测试和调制解决方案来支持该标准。该解决方案支持全面的HDMI 2.0发射机和接收机电气物理层 （PHY） 测试，可帮助确保来自该快速成长行业的不同供应商的产品间的互操作性。作为得到广泛采用的HDMI 1 …
|
新闻稿 Marketing Document | |
|
NRZ 和 PAM4 信令的光带宽要求
直到最近，光带宽和电带宽产生的结果均类似，但是随着 IEEE 技术规格的最新变更，已不再存在这种情况。本白皮书阐明了这些术语，从数学层面展示了它们之间的关系，并为理解和正确计算光通道的光带宽和电带宽提供了基础。
文献编号： 55W-61363-0 |
白皮书 Marketing Document | |
|
示波器选型指南
从基本信号校验到高性能分析，这份12页的选型指南概括介绍了泰克全系列示波器。对照表给出了高级指标和特点，指明了每个系列的示波器之间的主要差异。下载PDF了解更多
文献编号： 46W-31080-7 |
选型指南 Marketing Document | |
|
TDR阻抗测量：信号完整性的基础
Achieve stable and accurate TDR results with Tektronix sampling oscilloscopes.At today’s high operating frequencies, anything that affects your signal’s rise time, pulse width, timing, jitter or noise content can impact reliability at the system …
文献编号： 55W-14601-2 |
速查资料 Marketing Document | |
|
TDR和S参数测量 – 您需要多高的性能？
In this paper you will read about the accuracy requirements for serial data network analysis debug, compliance, validation, and characterization applications. In addition you will learn how TDR-based measurement tools can provide you a quicker way to …
文献编号： 85W-19888-0 |
应用指南 Marketing Document | |
|
2016年测试测量解决方案
泰克为您提供了三种中文版产品手册，向您介绍主要行业领域中的最新相关产品信息，即测试测量解决方案、视频产品选购指南和基础仪器指南。
文献编号： 49C-19265-15 |
选型指南 Marketing Document | |
|
存储测试解决方案应用速查资料
支持所有速率的主机、设备和电缆物理层测试在存储和服务器行业中，人们一直孜孜不倦地在最低成本的基础上追求更快的数据传送速度和更大的存储容量。泰克为各种标准提供了强大完善的一系列测试仪 器，包括：SATA、SAS、InfiniBand、光纤通道、XAUI、等等。
文献编号： 55C-21407-6 |
速查资料 Marketing Document | |
|
为抖动测量选择适当的平台
本文将阐述某些基本抖动术语，然后讨论抖动测量，以及在处理串行数据通信结构时最适合评估和量化抖动的工具。
文献编号： 37W-19858-2 |
技术简介 Marketing Document | |
|
100 Gb/s通信系统物理层测试
本应用指南介绍了怎样准备100G标准一致性测量，包括IEEE802.3ba，以及帮助您诊断不满足标准的元器件和系统及测量性能余量的多项测试。
文献编号： 65W-28494-1 |
应用指南 Marketing Document | |
|
25 Gb/s信令测量方法
本应用指南介绍了100 G系统中25+ Gb/s信令发射机和接收机检定和一致性测试的测量方法，重点是示波器测量，部分涉及BERT。
文献编号： 86W-29118-1 |
应用指南 Marketing Document | |
|
自动化技术解决一致性测试
Interoperability and compliance concerns are commanding an ever-larger share of the serial system designer's attention. Fully automated compliance solutions are the answer. They can implement consistent test regimes while attending to the details …
文献编号： 55W-21408-0 |
速查资料 Marketing Document | |
|
深入了解示波器
在阅读《深入了解示波器》介绍的概念后，您将能够初步了解示波器的基础知识和工作原理:
描述示波器的工作方式
描述各种示波器之间的差异
描述电气波形类型
了解基本示波器控制功能
进行简单的测量
文献编号： 03Z-8605-7 |
入门手册 Marketing Document | |
|
泰克USB 测试解决方案
电接口验证和一致性测试、信号路径检定、数字验证和调试、无线EVM 一致性测试
文献编号： 55C-17700-6 |
速查资料 Marketing Document | |
|
DisplayPort 一致性测试解决方案
为迎接DisplayPort 一致性测试挑战提供强大、高效的解决方案DisplayPort 是下一代数字显示接口，通过提供高速度低针脚数解决方案，满足了更高性能的显示需求。这种新结构也带来了必须克服的新的互通和一致性设计挑战。泰克提供了完善的一系列工具，包括一致性测试软件和模拟验证工具，使您能够迅速高效地解决设计挑战。
文献编号： 61C-21324-5 |
速查资料 Marketing Document | |
|
采用80SJNB Advanced的均衡和串行数据链路分析方法(SDLA)应用指南
本应用指南介绍了在有损耗或者耗散的信道上运行的串行数据标准使用的测试和测量方法，在接收端这些串行数据的眼图会呈现关闭状态，使用均衡(FFE/DFE)技术可以使眼图张开。在这里还将接收端上的测量数据与发送端上的建议测量数据作一些比较，以及串行数据设计人员和测试工程师感兴趣的其它SDLA概念。
文献编号： 61W-21428-1 |
应用指南 Marketing Document | |
|
使用参考接收机进行的 10 GB 以太网激光发射机测试中的变化
电信/数据通信原始设备制造商、系统安装人员和系统服务人员在示波器上查看眼图并测试激光的时域信号质量时使用的关键工具之一是参考接收机 (RR)。本应用指南将针对两种不同类型的时域光学采样系统（其中包括泰克的参考接收机滤波器），通过一系列测量实例展示如何以及何时将它们用于 10GbE 激光发射机测试，并讨论所得的测量结果。
文献编号： 85W-16691-1 |
应用指南 Marketing Document | |
|
消光比(ER)校准白皮书
本白皮书介绍了10 GbE (以太网)和SONET/SDH中高度准确的ER测量的部分好处，以及支持一致准确的ER结果的方法，其中10 GbE (以太网)对ER的要求相对较低。
文献编号： 85W-25115-1 |
白皮书 Marketing Document | |
|
高度可靠地测试10-Gb/s 系统(STM-64/OC-192)
高度可靠地测试10-Gb/s 系统由于80C02 和80C04取样模块独特的体系结构，CSA8000 的转换增益和信噪比(SNR)改善了近两倍。这些模块还在 理想的ITU 光参考接收器(ORR)响应中实现了更加紧密的 容限。其结果，改善了测量结果的重复性，在创建10-Gb/ s发射器和网络时，在测量质量上为设计人员提供了更高 的信心。互联网、电子商务、虚拟专用网、IP电话和其它以数据为 中心的应用的迅猛增长，正促使人们要求越来越高的带 宽，而且这一势头有增无减。为跟上需求增长，网络供应 …
文献编号： 85W-13595-0 |
应用指南 Marketing Document | |
|
高速互连：检定基于测量的模型
随着现代信令标准把数字设计推到千兆赫兹和千兆位水平，互连性能成为实现可靠的系统操作的关键因素。本入门手册将介绍各种挑战和解决方案，以便为互连链路的每个部分获得准确的基于测量的互连模型。您将了解时域和频域测量原理，以及怎样基于TDR/T测量建立系统性能模型，获得最高效的结果。
文献编号： 85W-19887-0 |
入门手册 Marketing Document | |
|
高速串行技术中的PAM4信令：测试、分析和调试
了解与PAM4技术有关的重要信息，以及泰克验证PAM4信号属性的测试方法。本应用指南介绍了50-400G应用中的PAM4技术，详细介绍了PAM4信令，介绍了光接口和电接口发射机评估，阐述了PAM4接收机评估方法，等等。
文献编号： 55W-60273-2 |
应用指南 Marketing Document | |
|
泰克DSA8200和DSA8300之间采样可编程接口的改变
本文包含更改可编程接口（PI）的摘要。关于GPIB和TekVisa的讨论
文献编号： 85W-27063-0.pdf |
白皮书 Marketing Document | |
|
DSA8300 快速入门用户手册
数字串行分析仪
Quick Start User Manual
支持 TekScope 版本 6.5.X 及更高版本。 本手册介绍 DSA8300 数字串行分析仪的安装和控制，以及主要操作和概念。 部件号： 071295005 |
主要用户 Manual | |
|
DSA8300 快速入门用户手册
数字串行分析仪
Quick Start User Manual
支持 TekScope 版本 6.3.1.X 及更高版本。 本手册介绍 DSA8300 数字串行分析仪的安装和控制，以及主要操作和概念。 部件号： 071295004 |
主要用户 Manual | |
|
DSA8300 快速入门用户手册
数字串行分析仪
Quick Start User Manual
本手册介绍 DSA8300 数字串行分析仪的安装和控制，以及基本操作和概念。 部件号： 071295002 |
主要用户 Manual | |
|
DSA8300 快速入门用户手册
数字串行分析仪
Quick Start User Manual
本手册介绍 DSA8300 数字串行分析仪的安装和控制，以及基本操作和概念。 部件号： 071295001 |
主要用户 Manual | |
|
DSA8300 快速入门用户手册
数字串行分析仪
Quick Start User Manual
本手册介绍 DSA8300 数字串行分析仪的安装和控制，以及基本操作和概念。 部件号： 071295000 |
主要用户 Manual | |
|
如何使用 TekVISA 向我的仪器发送命令？
TekVISA 下载链接：
/node/69201
为与示波器进行通信并控制示波器，可以使用 OpenChoice Talker-Listener。返回“应用程序和实用工具”面板，单击OpenChoice Talker Listener，然后单击”启动应用程序或实用工具”。系统会弹出一个新窗口，您将在此窗口中看到 4 个不同的面板：“仪器”，选择您想要与之通信的仪器；“输入命令或脚本”，输入编程命令并将其发送到仪器的字段 …
|
常见问题 ID69181 Faq | |
|
如何使用仪器的程序员手册？
TekVISA 下载链接： TEKVISA CONNECTIVITY SOFTWARE
您好，欢迎使用泰克产品，今天我将介绍包含 3 个部分 TekVISA 使用指南系列的最后一个部分。我将概述程序员手册，以及如何使用它们来找到使用编程命令的正确方法。
每台示波器都附带一本程序员手册，其中包含所有可用于以编程方式控制仪器的命令。可在我们的网站 www.tek.com 上找到程序员手册。为了查找适用于我一直在使用的 MDO4104-6 的手册，我将进入我们的网站，然后在搜索栏中输入 …
|
常见问题 ID69186 Faq | |
|
我的示波器使用什么机架安装？
示波器系列
机架安装
TDS1000/TDS2000
RM2000
TDS1000B/TDS2000B/TDS2000C
RM2000B
TPS2000/TPS2000B
无机架安装 - 皮带吊架 343-1689-00
TDS3000/TDS3000B/TDS3000C
RM3000
DPO2000
RMD2000
…
|
常见问题 ID64571 Faq |