联系我们
与泰克代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。
致电我们
工作时间：上午9:00-下午5:00（太平洋标准时间）
下载
下载手册、产品技术资料、软件等：
反馈
此产品已经停止销售，请与我们联系获得更多帮助。
Characteristics
The CSA7154 has been discontinued.
Vertical System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Input Channels |
4 |
4 |
|
Hardware Analog Bandwidth (-3 dB) |
1.5 GHz |
4 GHz |
|
Rise Time 10% to 90% (Typical) |
240 ps |
100 ps |
|
Rise Time 20% to 80% (Typical) |
|
72 ps |
|
Input Coupling |
DC, GND |
|
|
Input Impedance |
50 Ω |
|
|
Input Sensitivity |
2 mV/div to 1 V/div |
|
|
Vertical Resolution |
8 bits, (>11 bits with averaging) |
|
|
Max. Input Voltage |
<1 VRMS for <100 mV/div, <5 VRMS for ≥100 mV/div settings. Also determined by TekConnect® accessory |
|
|
Offset Range |
2 mV to 50 mV/div ±0.5 V, 50.5 mV to 99.5 mV ±0.25 V, 100 mV to 500 mV ±5 V, 505 mV to 1 V/div ±2.5 V |
|
|
DC Gain Accuracy 4 mV/div to 1 V/div |
±(2% + (2% x net offset/10)) net offset = voltage level at center screen (vertically) |
|
Optoelectronic System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Specifications assume use of the included 013-0327-00 O-to-E Output to CH1 interconnect (unless otherwise noted). |
||
|
Optical channel unfiltered bandwidth |
1.6 GHz |
2.4 GHz |
|
Input Connector |
Rifocs universal connector |
|
|
Wavelength range |
700 nm to 1650 nm |
|
|
Calibrated wavelengths |
780 nm, 850 nm, 1310 nm, 1550 nm |
|
|
O/E Gain |
≥0.27 V/mW (0.35 V/mW typical) @ 780 nm ±20 nm ≥0.33 V/mW (0.40 V/mW typical) @ 850 nm ±20 nm ≥0.64 V/mW (0.75 V/mW typical) @ 1310 nm ±20 nm ≥0.64 V/mW (0.75 V/mW typical) @ 1550 nm ±20 nm |
|
|
Sensitivity (smallest average power for mask test). Assumes scale factor is set to minimum μW/div settings and signal is at least 4 divisionsp-p |
40 μWp-p at 1310 nm and 1550 nm. 20 μW (-17 dBm) average power assuming 50% average duty cycle 80 μWp-p at 780 nm and 850 nm. 40 μW (-14 dBm) average power assuming 50% average duty cycle |
|
|
RMS Noise |
≤0.85 μW + (6.5% of W/div setting) at 1310 nm and 1550 nm. ≤1.6 μW + (6.5% of W/div setting) at 850 nm. ≤2.0 μW + (6.5% of W/div setting) at 780 nm |
≤1.1 μW + (6.5% of W/div setting) at 1310 nm and 1550 nm ≤2.1 μW + (6.5% of W/div setting) at 850 nm ≤2.6 μW + (6.5% of W/div setting) at 780 nm |
|
Input range |
10 μW/div to 500 uW/div Optical reference receiver typically available over the following range: 40 μW (-14 dBm) to 400 μW (-4 dBm) at wavelength <1200 nm; 25 μW (-16 dBm) to 250 μW (-6 dBm) at wavelength >1200 nm. |
|
|
Absolute Maximum Nondestructive Optical Input |
5 mW average; 10 mW peak at wavelength with highest relative responsivity |
|
|
Maximum Nonsaturating Linear Response to Transient Input (Typical) |
<170 μW average input (340 μW pk) at 850 nm <120 μW average input (240 μW pk) at 1310 and 1550 nm |
|
|
Fiber Input |
62.5 μm core multimode fiber |
|
|
Input Return Loss (typical) |
With 50 μm or 62.5 μm core multimode fiber (CPC6) attached: >14 dB for 780 nm ±20 nm >14 dB for 850 nm ±20 nm With 9 μm core single mode fiber (SMF-28) attached: >28 dB for 1310 nm ±20 nm >28 dB for 1550 nm ±20 nm |
|
Optical Reference Receiver System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Fourth-order Bessel-Thompson filter response at the following rates: |
||
|
SONET/SDH |
OC-1/STM0 (51.84 Mb/s) OC-3/STM1 (155.52 Mb/s) OC-12/STM4 (622.08 Mb/s) |
OC-1/STM0 (51.84 Mb/s) OC-3/STM1 (155.52 Mb/s) OC-12/STM4 (622.08 Mb/s) OC-48/STM16 (2488.3 Mb/s) OC-48 FEC (2.666 Gb/s) |
|
Gigabit Ethernet |
1000Base SX (1.25 Gb/s) 1000Base LX (1.25 Gb/s) |
|
|
Fibre Channel |
FC133 (132.7 Mb/s) FC266 (265.6 Mb/s) FC531 (531.2 Mb/s) FC1063 (1063.5 Mb/s) |
FC133 (132.7 Mb/s) FC266 (265.6 Mb/s) FC531 (531.2 Mb/s) FC1063 (1063.5 Mb/s) FC2125 (2127 Mb/s) |
|
IEEE 1394b |
S400 (491.5 Mb/s) S800 (983.04 Mb/s) |
S400 (491.5 Mb/s) S800 (983.04 Mb/s) S1600 (1.9661 Gb/s) |
|
InfiniBand |
|
2.5 Gb/s (2127 Mb/s) |
|
VSR |
1.24416 Gb/s |
|
Clock Recovery System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Channel type |
Electrical, Multimode Optical, Single Mode Optical |
|
|
Clock Recovery Phase Locked Loop Bandwidth |
Fbaud/1600 typical |
|
|
Tracking/Acquisition Range |
±2% of requested baud |
|
|
Clock Recovery Jitter (Typical) |
0.25% bit period +9 psRMS for PRBS data patterns or 8 psRMS for repeating “0011” data patterns |
0.25% period +5 psRMS for PRBS data pattern or 4 psRMS for repeating “011” data patterns |
|
Input Sensitivity for Clock Recovery |
1 division pk-pk displayed signal |
|
|
Input Data Rates |
1.5 Mbaud to 1.5 Gbaud |
1.5 Mbaud to 3.125 Gbaud |
Communications Mask Testing
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
SONET/SDH GR 253-CORE (Issue 39/21/2000) |
OC-1/STM0 OC-3/STM1 OC-12/STM4 |
OC-1/STM0 OC-3/STM1 OC-12/STM4 OC-48/STM16 OC-48 FEC (2.666 Gb/s) |
|
ITU-T G.703 (10/98) |
DS1 Rate, DS2 Rate Sym Pair, DS2 Rate Coax, DS3 Rate E1 Sym Pair, E1 Coax, E2, E3 E4 Binary 0, E4 Binary 1 32 Mb, 97 Mb STM 1E 0/Bin 0, STM 1E 1/Bin 1 |
|
|
ANSI T1.102-1993 (R1999) |
DS1, DS1A, DS1C, DS2, DS3, DS4NA, DS4NA Max Output STS-1 Pulse, STS-1 Eye STS-3, STS-3 Max Output |
|
|
Ethernet IEEE Std 802.3 and ANSI X3.263-1995 |
100 Base-T STP, 100 Base-T UTP 1000 Base-SX Short Wave Optical 1000 Base-LX Long Wave Optical 1000 Base-CX |
|
|
Fibre Channel Optical (ANSI X3.303-1997) |
FC133, FC266, FC531, FC1063, FC1063 Draft Rev 11 |
FC133, FC266, FC531, FC1063, FC1063 Draft Rev 11 FC2125 Draft Rev 11 |
|
Fibre Channel Electrical (ANSI X3.303-1997) |
FC133E, FC266E, FC531E, FC1063E, FC1063E Normalized Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Receive |
FC133E, FC266E, FC531E, FC1063E, FC1063E Normalized Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Receive, FC2125E Normalized Beta, Delta, Gamma Transmit FC2125E Absolute Beta, Delta, Gamma Transmit FC2125E Absolute Beta, Delta, Gamma Receive |
|
USB Rev 2.0 April 2000 |
FS (12 Mb/s) HS:T1, T2, T3, T4, T5, T4 (480 Mb/s) |
|
|
InfiniBand (draft) |
|
2.5 Gb/s Optical 2.5 Gb/s Electrical |
|
IEEE 1394b (draft) |
S400 Optical S400b T1, S400b T2 S800 Optical S800b T1, S800b T2 |
S400 Optical S400b T1, S400b T2 S800 Optical S800b T1, S800b T2 S1600 Optical S1600b T1, S1600b T2 |
|
Serial ATA (Rev 1.0 June 2002) |
|
G1 Rx (5 Cycle), G1 Tx (5 Cycle) |
|
Rapid IO LP_LVDS Rev 0.3 (draft) 5/2002 |
+Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s +Ext Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s +Rcv: 500 Mb/s, 750 Mb/s, 1 Gb/s |
+Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s +Ext Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s +Rcv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s |
|
Rapid IO Serial Rev 1.1 December, 2001 |
|
RIO Serial: 1.25 Gb/s, 2.5 Gb/s |
|
OIF Standards Draft 1.13 June 5,2002 |
SFI-5, SPI-5 TA/TC/RB/RD data/clock (2.4888 Gb/s) SFI-5, SPI-5 TC Data (2.4888 Gb/s) SFI-5, SPI-5 TA Clk (2.4888 Gb/s) SFI-5, SPI-5 TC Clk (2.4888 Gb/s) SFI-5, SPI-5 Data (2.4888 Gb/s) SFI-5, SPI-5 RD Data (2.4888 Gb/s) SFI-5, SPI-5 RB Clk (2.4888 Gb/s) SFI-5, SPI-5_5 RD Clk (2.4888 Gb/s) VSR OC 192/STM64 1.24416 Gb/s TFI-5 (2.4888 Gb/s) |
|
|
PCI-Express Rev 1.0 |
|
Transmit/Receive (2.5 Gb/s) |
Timebase System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Timebase Range |
50 ps to 10 s/div |
|
|
Timebase Delay Time Range |
16 ns to 250 s |
5 ns to 250 s |
|
Channel to Channel Deskew Range |
±25 ns in 1 ps steps |
±75 ns in 1 ps steps |
|
Time Interval Accuracy, single-shot sample mode |
(0.06/sample rate + 2.5 ppm x |reading|) RMS |
|
|
Trigger Jitter |
6 psRMS typical |
1.5 psRMS typical |
|
Long Term Sample Rate and Delay Time Accuracy |
±2.5 ppm over ≥100 ms interval; aging <1 ppm per year from date of factory calibration |
|
|
External Timebase Reference |
Rear Panel Connection |
|
|
External Reference Input Frequency Range |
9.8 MHz to 10.2 MHz |
|
|
External Reference Input Sensitivity |
Vin≥200 mVp-p |
|
|
External Reference Maximum input signal |
7 Vp-p |
|
|
Internal Reference Output Frequency |
±2.5 ppm over ≥100 ms interval; aging <1 ppm per year from date of factory calibration |
|
|
Internal Reference Output Voltages |
Vout (Hi) ≥2.5 V open circuit; ≥1.0 V into 50 Ω load to gnd Vout (Lo) ≤0.7 V into a load of ≤4 mA; ≤0.25 V into 50 Ω load to gnd |
|
Acquisition System
|
Real-time Sample Rates |
CSA7154 |
CSA7404B |
|---|---|---|
|
1 channel (Max. rate) |
20 GS/s |
|
|
2 channels (Max. rate) |
10 GS/s |
|
|
3-4 channels (Max. rate) |
5 GS/s |
|
|
Equivalent time sample rate (Maximum) |
1 TS/s |
|
|
Maximum record length per channel with standard memory |
2 M (1 ch), 1 M (2 ch),500 k (4 ch) |
4 M (1 ch), 2 M (2 ch), 1 M (4 ch) |
|
With Memory Opt. 2M |
8 M (1 ch), 4 M (2 ch), 2 M (4 ch) |
|
|
With Memory Opt. 3M |
16 M (1 ch), 8 M (2 ch), 4 M (4 ch) |
|
|
With Memory Opt. 4M |
32 M (1 ch), 16 M (2 ch), 8 M (4 ch) |
|
|
With Memory Opt. 5M |
|
64 M (1 ch), 32 M (2 ch), 16 M (4 ch) |
Maximum Duration at Highest Real-time Resolution (1 ch)
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Time Resolution (single-shot) |
50 ps (20 GS/s) |
|
|
Maximum Duration with Standard Memory |
100 μs |
200 μs |
|
Maximum Duration with Opt. 2M |
400 μs |
|
|
Maximum Duration with Opt. 3M |
800 μs |
|
|
Maximum Duration with Opt. 4M |
1.6 ms |
|
|
Maximum Duration with Opt. 5M |
|
3.2 ms |
Acquisition Modes
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
FastAcq Acquisition |
Powered by DPX® acquisition technology, FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events |
|
|
Maximum FastAcq Waveform Capture Rate |
>400,000 wfms/sec |
|
|
Sample |
Acquire sampled values |
|
|
Waveform Database (WfmDB) |
Accumulate waveform database providing three-dimensional array of amplitude, time and counts |
|
|
Peak Detect |
Captures narrow glitches at all real time sampling rates |
|
|
Minimum Peak Detect Pulse Width |
400 ps |
|
|
Average |
From 2 to 10,000 waveforms included in average |
|
|
Envelope |
From 2 to 2x109 waveforms included in min-max envelope |
|
|
Hi-Res |
Real-time boxcar averaging reduces random noise and increases resolution |
|
|
FastFrame Acquisition |
Acquisition memory divided into segments; maximum trigger rate >265,000 waveforms per second. Time of arrival recorded with each event |
|
Trigger System
|
|
CSA7154 |
CSA7404B |
|---|---|---|
|
Sensitivity |
||
|
Trigger Level Range |
||
|
Internal DC Coupled, Main Trigger |
0.5 div from DC to 50 MHz, ≤1 div at 1.5 GHz |
0.5 div from DC to 50 MHz, ≤1.5 div at 3 GHz |
|
External (Auxiliary Input) |
250 mV from DC to 50 MHz increasing to 350 mV at 500 MHz |
150 mV from DC to 50 MHz increasing to 500 mV at 2.5 GHz |
|
Main Trigger Modes |
Auto, Normal and Single |
|
|
Trigger Sequences |
Main, Delayed by Time, Delayed by Events. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time |
|
|
Internal |
±12 divisions from center of screen |
|
|
External (Auxiliary Input) |
±8 V |
±5 V |
|
Line |
fixed at 0 V |
|
|
Trigger Coupling |
DC, AC (attenuate <60 Hz), HF Rej (attenuate >30 kHz), LF Rej (attenuates <80 kHz), Noise Reject (reduce sensitivity) |
|
|
Trigger Holdoff Modes |
Random, Automatic or User-Specified Time |
|
|
Trigger Holdoff Range |
250 ns minimum to 12 seconds maximum |
|
Trigger Modes
Edge - Positive and/or negative slope on any channel or front panel auxiliary input. Coupling includes DC, AC, noise reject, HF reject and LF reject.
Comm - Support for AMI, HDB3, BnZS, CMI, MLT3 and NRZ encoded communications signals.
AMI encoding: Standards include DS1, DS1A, DS1C, DS3, E1, E2, E3, STS-1 or a custom bit rate. Select between positive or negative isolated one, zero pulse form or eye patterns.
HDB3 encoding: Standards include E1, E2, E3, DS1A or custom bit rate. Select between positive or negative isolated one pulse or eye pattern.
BnZS encoding: Standards include DS1, DS1C, DS2, DS3, STS-1 or custom bit rate. Select between positive or negative isolated one pulse or eye pattern.
CMI encoding: Standards include STS-3, STM1E, DS4NA, E4 or a custom bit rate. Select between positive or negative one pulse, zero pulse or eye pattern.
MLT3 encoding: Standards include 100 Base-TX.
NRZ encoding: Standards include OC1/STM0, OC3/STM1, OC12/STM4, OC48/STM16, GB Ethernet, FC133, FC266, FC531, FC1063, FC2125, Infiniband 2.5, G1 ATA, FS USB, HS USB, IEEE 1394b S400b, S800b, S1600b, OC-48 FEC, 1000 BASE CX, RapidIO, SFI-5, SPI-5, VSR, PCI-Express, TFI-5; eye patterns only. CSA7154 limited to standards ≤1.25 Gb/s.
Serial Pattern - 64-Bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format. Trigger on NRZ-encoded data up to 1.25 Gbaud.
Glitch - Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is 1.0 ns with 200 ps resolution. Minimum glitch width is 225 ps with rearm time of 250 ps (B models).
Width - Trigger on width of positive or negative pulse (down to 225 ps on B models) either within or out of selectable time limits: 1 ns (CSA7154) or 340 ps (B models) to 1 s.
Runt - Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Optional time qualification.
Timeout - Trigger on an event which remains high, low, or either, for a specified time period, selectable from 1 ns or 340 ps (B models) to 1 s with 200 ps or 100 ps (B models) resolution.
Transition - Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative or either.
Setup/Hold - Trigger on violations of both setup time and hold time between clock and data present on any two input channels.
Pattern - Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR, NAND, NOR) specified for four input channels defined as HIGH, LOW or Don't Care.
State - Any logical pattern of channels (1, 2, 3) clocked by edge on channel 4. Trigger on rising or falling clock edge.
Window - Trigger on an event that enters or exits a window defined by two user-adjustable thresholds. Event can be time or logic qualified (B models only)
Logic Qualified Trigger applicable to Glitch, Width, Runt, Timeout, Transition, Setup/Hold, Window triggers- Trigger on the specified event only if the logic state defined with the remaining unused channels occurs (B models only)
Trigger Delay by Time - Trigger Delay by Time 16 ns (5 ns for B models) to 250 seconds.
Trigger Delay by Events - Trigger Delay by Events 1 to 10,000,000 Events.
Waveform Measurements
Amplitude - Amplitude, High, Low, Maximum, Minimum, Peak to Peak, Mean, Cycle Mean, RMS, Cycle RMS, Positive Overshoot, Negative Overshoot.
Time - Rise time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Period, Frequency, Delay.
Combination - Area, Cycle Area, Phase, Burst Width.
Histogram-related - Waveform count, Hits in box, Peak hits, Median, Maximum, Minimum, Peak to Peak, Mean (μ), Standard Deviation (σ), μ+1σ, μ+2σ, μ+3σ.
Eye Pattern-related - Extinction Ratio (absolute, % and dB), Eye Height, Eye Top, Eye Base, Eye Width, Crossing %, Jitter (peak-peak, RMS and 6sigma), Noise (peak-peak and RMS), S/N ratio, Cycle Distortion, Q-factor.
Waveform Processing/Math
Algebraic Expressions - Define extensive algebraic expressions including waveforms, scalars and results of parametric measurements e.g. (Integral (Ch. 1-Meas(Ch. 1))*1.414).
Arithmetic - Add, subtract, multiply, divide waveforms and scalars.
Relational - Boolean result of comparison >, <, ≥, ≤, ==, !=.
Calculus - Integrate, differentiate.
Frequency Domain Functions - Spectral magnitude and phase, real and imaginary spectra.
Vertical Units - Magnitude: Linear, dB, dBm.
Phase: degrees, radians.
Window Functions - Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential.
Waveform Definitions - Waveform definition as arbitrary math expressions.
Display Characteristics
Display Type - Liquid crystal active-matrix color display; integral touch screen.
Display Size - 211.2 mm (W) x 158.4 mm (H), 264 mm (10.4 in.) diagonal.
Display Resolution -
CSA7154: 640 horizontal x 480 vertical pixels.
CSA7404B: 1024 horizontal x 768 vertical pixels
Waveform Styles - Vectors, Dots, Variable Persistence, Infinite Persistence.
Computer System and Peripherals
CPU -
CSA7154: 850 MHz Celeron Processor.
CSA7404B: Intel Pentium IV processor, 2.0 GHz
PC System Memory - 512 MB.
Hard Disk Drive - 40 GB removable hard disk drive: rear-panel, or (B model only) front-panel (option FHD).
Floppy Disk Drive - 1.44 MB 3.5 in floppy disk drive: front-panel, or (B model only) rear-panel (option FHD).
CD-RW Drive - Rear-panel CD-RW drive.
Mouse - Thumb wheel model included, USB interface.
Keyboard - Order 118-9402-00 for small keyboard (fits in pouch); PS-2 interface. Order 119-6633-00 for full-size keyboard; USB interface and hub.
Input/Output Ports
Probe Compensation Output - Front panel BNC connector, requires Probe Cal-Deskew Fixture (included) for probe attachment.
400 mV (non B model) or 1 V ( B model) ±20% into >10 kΩ load
200 mV (non B model) or 500mV ( B model) ±20% into a 50 Ω load.
Recovered Clock Out - Front-panel SMA connector provides output of clock signal recovered from specified channel. Output compatible with ECL terminated with 50 Ω to GND. Peak-to-peak output swing at 650 MHz is at least 200 mV into 50 Ω. Higher frequencies will be further attenuated by approximately 6 dB per octave above 625 MHz.
Recovered Data Out - Front-panel SMA connector provides regenerated data output from clock recovery system. Serial data output baud rate ≤1250 MBaud. Output swing at this baud rate will be at least 200 mV into 50 Ω.
Optical In - Optoelectronic converter input, 700 nm to 1650 nm, Rifocs connector.
O/E Output - Front-panel BMA connector providing electrical output of optoelectronic converter. SMA adapter included.
Analog Signal Output Amplitude - Rear-panel BNC connector, provides a buffered version of the signal that is attached to the Channel 3 input when Ch. 3 is selected as trigger source. Frequency response: 1.8 GHz into a 50 Ω load. Amplitude: 20 mV/div ±20% into a 1 MΩ load, 10 mV/div ±20% into a 50 Ω load.
Auxiliary Output - Rear-panel BNC connector, provides a TTL-compatible, polarity switchable pulse when the oscilloscope triggers or optionally, upon mask test failure or test completion.
External Timebase Reference In - Rear-panel BNC connector, timebase system can phase-lock to external 10 MHz reference.
Timebase Reference Out - Rear-panel BNC connector, provides TTL-compatible output of internal 10 MHz reference oscillator.
Parallel Port - IEEE 1284, DB-25 connector.
Audio Ports - Miniature phone jacks for stereo microphone input and stereo line output.
USB Port - Allows connection or disconnection of USB keyboard, mouse or other peripherals while oscilloscope power is on. B models have 2 USB ports.
Keyboard Port - PS-2 compatible.
Mouse Port - PS-2 compatible.
LAN Port - RJ-45 connector, supports 10 Base-T and 100 Base-T.
Serial Port - DB-9 COM1 port.
Windows Video Port - 15 pin D-Sub connector on the rear panel; connect a second monitor to use dual-monitor display mode. Video is DDC2B compliant
GPIB Port - IEEE 488.2 standard.
Scope Video Port - 15 pin D-Sub connector on the rear panel, video is IBM XGA compatible for B models. Connect to show the oscilloscope display, including live waveforms on an external monitor or projector. The primary Windows desktop can also be displayed on an external monitor using this port.
Power Source
Power - 100 to 240 VRMS, ±10%, 50/60 Hz CAT II.
115 VRMS ±10%, 400 Hz CAT II.
<300 Watts (450 VA).
Physical Characteristics
|
BENCHTOP CONFIGURATION |
||
|---|---|---|
|
Dimensions |
mm |
in. |
|
Weight |
kg |
lb. |
|
RACKMOUNT CONFIGURATION |
||
|
Dimensions |
mm |
in. |
|
Weight |
kg |
lb. |
|
MECHANICAL |
||
|
Required Clearance |
mm |
in. |
|
Height |
277 |
10.9 |
|
Width |
455 |
17.9 |
|
Depth |
425 |
16.75 |
|
Net |
19 |
41.5 |
|
Shipping |
37 |
85 |
|
Height |
277 |
10.9 |
|
Width |
502 |
19.75 |
|
Depth |
486 |
19.125 |
|
Net |
20 |
43.5 |
|
Shipping |
5.6 |
12.32 |
|
Top |
0 or >76 |
0 or >3 |
|
Bottom |
0 |
0 |
|
Left side |
76 |
3 |
|
Right side |
76 |
3 |
|
Front |
0 |
0 |
|
Rear |
0 |
0 |
Environmental
Temperature -
Operating:
0 °C or 5 °C (B models) to +50 °C, excluding floppy disk and CD-RW drives.
+10 °C to +45 °C, including floppy disk and CD-RW drives.
Nonoperating: -22 °C to +60 °C.
Humidity -
Operating: 20% to 90% relative humidity with a maximum wet bulb temperature of +29 °C at or below +50 °C, noncondensing. Upper limit derated to 25% relative humidity at +50 °C.
Nonoperating: With no diskette in floppy disk drive, 20% to 90% relative humidity with a maximum wet bulb temperature of +29 °C at or below +60 °C, noncondensing. Upper limit derated to 20% relative humidity at +60 °C.
Altitude -
Operating: 10,000 ft. (3,048 m).
Nonoperating: 40,000 ft. (12,190 m).
Random Vibration -
Operating: 0.00015 g2/Hz from 5 to 350 Hz,
-3 dB/octave from 350 to 500 Hz,
0.000105 g2/Hz at 500 Hz.
Overall level of 0.27 gRMS.
Nonoperating: 0.0175 g2/Hz from 5 to 100 Hz,
-3 dB/octave from 100 to 200 Hz,
0.0875 g2/Hz from 200 to 350 Hz,
-3 dB/octave from 350 to 500 Hz,
0.006132 g2/Hz at 500 Hz.
Overall level of 2.28 gRMS.
Electromagnetic Compatibility - EN 61326 (EU EMC Directive 89/336 EEC).
AS/NZS 2064 (Australian EMC Framework).
Safety - UL 3111-1, CSA-22.2 No. 1010.1, EN61010-2.