TDS6804B

概述

技术指标

此产品已经停止销售，请与我们联系获得更多帮助。

Characteristics

Vertical System

Characteristic	TDS6604B	TDS6804B	TDS6124C	TDS6154C
Input Channels	4
Bandwidth, Rise Time (DSP)	N/A	8 GHz 50 ps (10-90%) (typical) 35 ps (20-80%) (typical)	12 GHz 35 ps (10-90%) (typical) 24 ps (20-80%) (typical)	15 GHz 28 ps (10-90%) (typical) 19 ps (20-80%) (typical)
True Analog Bandwidth (-3 dB), typical Rise Time	6 GHz 70 ps (10-90%) (typical) 53 ps (20-80%) (typical)	7 GHz 62 ps (10-90%) (typical) 43 ps (20-80%) (typical)	12 GHz 35 ps (10-90%) (typical) 24 ps (20-80%) (typical)	12 GHz 35 ps (10-90%) (typical) 24 ps (20-80%) (typical)
Hardware Bandwidth Limits (Requires TCA-1MEG Adapter)	Full, 250 MHz, or 20 MHz
Input Coupling	DC, GND
Input Impedance	50 Ω ±2.5%		50 Ω ±2%
Input Sensitivity, 50 Ω	Full-scale 50 mV to 10 V (5 mV/div*² to 1 V/div). Full-scale is the peak-peak digitizer range at a given sensitivity. V/div = Full-scale/10.
Vertical Resolution	8 bit (>11 bit with averaging)
Max Input Voltage, 50 Ω (Also determined by TekConnect^® accessory)	<1 V_RMS for <100 mV/div, <7 V_RMS for ≥100 mV/div settings.		<1 V_RMS for <1 V full-scale, <5.5 V for ≥1 V full-scale.
DC Gain Accuracy	±(2.5% + (2% × offset))		±2%
Position Range	±5 divisions
Offset Range*³	Full-scale settings: 100 mV to 500 mV: ±0.5 V 505 mV to 995 mV: ±0.25 V 1 V to 5 V: ±5 V 5.05 V to 10 V: ±2.5 V		Full-scale settings: 100 mV: ±0.45 V 200 mV: ±0.4 V 500 mV: ±0.25 V 1 V: ±4.5 V 2 V: ±4.0 V 5 V: ±2.5 V 10 V: 0 General formula for offset range: 100 mV to 995 mV: ±\|0.5 V - Full-scale/2\| 1 V to 10 V: ±\|5 V - Full-scale/2\|
Offset Accuracy	±(0.7% × offset + 1.5 mV + 0.1 × V/div setting) for ranges <100 mV/div ±(0.8% × offset + 15 mV + 0.1 × V/div setting) for ranges ≥100 mV/div		±(0.35% × offset + 1.5 mV + 0.1 × V/div setting) for ranges <100 mV/div ±(0.35% × offset + 15 mV + 0.1 × V/div setting) for ranges ≥100 mV/div
Channel-to-Channel Isolation for Any Two Channels at Equal Vertical Scale	≥80:1 at 1.5 GHz ≥15:1 at rated bandwidth		≥150:1 at 0 to 10 GHz >80:1 at 10 GHz to 12 GHz ≥50:1 at 12 GHz to 15 GHz

*² 5 mV/div is a software zoom with 7 bits digitizer resolution at 50 mV full scale.

*³ Offset range in addition to ±5 division position range.

Vertical System (Cont.)

Characteristic	Full-scale Gain Setting	TDS6000B DSP OFF	TDS6154C DSP ON	TDS6124C DSP ON	BOTH DSP OFF
Noise, typical	100 mV	950 μV	690 μV	570 μV	670 μV
	160 mV	–	950 μV	840 μV	950 μV
	200 mV	1.6 mV	1.1 mV	940 μV	1.0 mV
	300 mV	–	1.6 mV	1.45 mV	1.6 mV
	400 mV	–	2.1 mV	1.85 mV	2.1 mV
	500 mV	3.55 mV	2.5 mV	2.3 mV	2.4 mV
	800 mV	–	4.4 mV	3.8 mV	4.1 mV
	900 mV	–	4.8 mV	4.3 mV	4.6 mV
	1 V	9.5 mV	6.9 mV	5.7 mV	6.8 mV
	2 V	16 mV	10.5 mV	9.5 mV	10.0 mV
	5 V	35.5 mV	25 mV	23 mV	24 mV
	10 V	68 mV	56 mV	46 mV	50 mV

Timebase System

Characteristic	TDS6000B Models	TDS6000C Models
Timebase Range	25 ps to 40 s/div; Interpolation down to 500 fs/pt.
Timebase Delay Time Range	5 ns to 250 s
Channel-to-Channel Deskew Range	±75 ns
Trigger Jitter (RMS)	<1.5 ps_RMS (typical)	<1 ps_RMS (typical)
Long-term Sample Rate and Delay Time Accuracy	<2 ppm over any ≥100 ms interval
Clock Stability	<1 ppm (typical) <2.5 ppm (guaranteed)
Jitter Noise Floor		420 fs_RMS (typical) over 10 µs duration or less
Delta Time Accuracy	[(0.06/sample rate) + (2.5 ppm × [Reading])]_RMS, typical*⁴	635 fs_RMS over <100 ns duration, typical*⁵

*⁴ Test conditions: Sample mode, at 20 GS/s.

*⁵ Test conditions: Sample mode, 500 mV full-scale (50 mV/div) setting, input signal 350 mV with rise time (10% to 90%) <50 ps.

Acquisition System

Characteristic	TDS6000B Models	TDS6000C Models
Max Sample Rate	20 GS/s on 4 channels	40 GS/s on 2 channels, 20 GS/s on 4 channels
Equivalent Time Sample Rate (max)	2 TS/s
Maximum Record Length per Channel	32 M (requires Opt. 4M)	64 M on two channels; 32 M on all 4 channels (requires Opt. 4M)
Standard	2 M on all 4 channels	4 M on two channels; 2 M on all 4 channels
with Memory Opt. 2M	8 M on all 4 channels	16 M on two channels; 8 M on all 4 channels
with Memory Opt. 3M	16 M on all 4 channels	32 M on two channels; 16 M on all 4 channels
with Memory Opt. 4M	32 M on all 4 channels	64 M on two channels; 32 M on all 4 channels

Maximum Time Duration Captured at Highest Real-time Resolution (All Channels)

Characteristic	TDS6000B Models (All Channels)	TDS6000C Models (Two Channels)
Max Duration with Standard Memory	100 μs	100 μs
Max Duration with Opt. 2M	400 μs	400 μs
Max Duration with Opt. 3M	800 μs	800 μs
Max Duration with Opt. 4M	1.6 ms	1.6 ms

Acquisition Modes

Mode	All Models
Waveform Database	Accumulate Waveform Database providing three-dimensional array of amplitude, time, and counts
Sample	Acquire sampled values
Peak Detect	Captures narrow glitches at all real-time sampling rates
Minimum Peak Detect Pulse Width	50 ps
Averaging	From 2 to 10,000 waveforms included in average
Envelope	From 2 to 2×10⁹ waveforms included in min-max envelope
Hi-Res	Real-time boxcar averaging reduces random noise and increases resolution
FastFrame™ Acquisition	Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with each event
Roll Mode	200 kS/s at 8 M record length and 500 kS/s at 4 M record Length on all channels.

Pinpoint™ Trigger System

Characteristic	All Models
Sensitivity
Internal DC Coupled	0.5 div DC to 50 MHz increasing to 2.5 div at 7 GHz (TDS6000B models, typical). 0.4 div DC to 50 MHz , increasing to 1 div at 3 GHz, increasing to 3 div at 9 GHz (TDS6000C models, typical).
External (auxiliary input)	250 mVDC to 50 MHz, increasing to 350 mV at 1 GHz, increasing to 500 mV at 2 GHz (typical).
Trigger Characteristics
Main Trigger Modes	Auto, Normal, and Single.
A Event and Delayed B Event Trigger Types	Edge, Glitch, Runt, Width, Transition Time, Timeout, Pattern, State, Setup/Hold, Window – all except Edge, Pattern, and State can be Logic State qualified by up to two channels.
Trigger Sequences	Main, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time.
Communications-related Triggers (requires Opt. SM)	Support for AMI, HDB3, BnZS, CMI, MLT3, and NRZ encoded communications signals up to 3.125 Gb/s. Select among isolated positive or negative one, zero pulse form, or eye patterns as applicable to standard.
Serial Pattern Trigger (requires Opt. ST)	64 bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format. Trigger on NRZ-encoded data up to 1.25 Gbaud. TDS6000C models only: trigger on 8b/10b encoded data up to 3.125 Gbaud (40 bits).
Trigger Level Range
Internal	±12 divisions from center of screen.
External (auxiliary in)	±5 V.
Line	Fixed at 0 V.
Trigger Coupling	DC, AC (attenuate <60 Hz). HF reject (attenuate >30 kHz). LF reject (attenuates <80 kHz). Noise reject (reduce sensitivity).
Trigger Holdoff Range	250 ns minimum to 12 s maximum.

Trigger Types

Edge - Positive and/or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, noise reject, HF reject, and LF reject.

Glitch - Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is down to 100 ps with re-arm time of 250 ps.

Width - Trigger on width of positive or negative pulse (down to 100 ps) either within or out of selectable time limits.

Runt - Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Optional time qualification.

Timeout - Trigger on an event which remains high, low, or either, for a specified time period, selectable from 360 ps to 1 s.

Transition - Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either.

Setup/Hold - Trigger on violations of both setup time and hold time between clock and data present on any two input channels.

Pattern - Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR, NAND, NOR) specified for four input channels defined as HIGH, LOW, or Don't Care.

State - Any logical pattern of channels (1, 2, 3) clocked by edge on channel 4. Trigger on rising or falling clock edge.

Window - Trigger on an event that enters or exits a window defined by two user-adjustable thresholds. Event can be time or logic qualified.

Trigger Delay by Time - 5 ns to 250 seconds.

Trigger Delay by Events - 1 to 10,000,000 events.

Waveform Measurements

Amplitude - Amplitude, High, Low, Maximum, Minimum, Peak-to-Peak, Mean, Cycle Mean, RMS, Cycle RMS, Positive Overshoot, Negative Overshoot.

Time - Rise time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Period, Frequency, Delay.

Combination - Area, Cycle Area, Phase, Burst Width.

Histogram-related - Waveform count, Hits in box, Peak hits, Median, Maximum, Minimum, Peak-to-Peak, Mean (μ), Standard Deviation (σ), μ + 1σ, μ + 2σ, μ + 3σ.

Eye-pattern-related - Extinction Ratio (absolute, %, and dB), Eye Height, Eye Top, Eye Base, Eye Width, Crossing %, Jitter (peak-peak, RMS, and 6sigma), Noise (peak-peak and RMS), S/N ratio, Cycle Distortion, Q-factor.

Waveform Processing/Math

Algebraic Expressions - Define extensive algebraic expressions including waveforms, scalars, and results of parametric measurements e.g. (Integral (CH.1-Mean(CH.1))×1.414).

Arithmetic - Add, subtract, multiply, divide waveforms and scalars.

Relational - Boolean result of comparison >, <, ≥, ≤, =, ≠.

Calculus - Integrate, differentiate.

Frequency Domain Functions - Spectral magnitude and phase, real and imaginary spectra.

Vertical Units -

Magnitude: Linear, dB, dBm.

Phase: Degrees, Radians.

Window Functions - Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential.

Waveform Definition - As arbitrary math expressions.

Display Characteristics

Display Type - Liquid-crystal active-matrix color display.

Display Size - Diagonal: 264 mm (10.4 in.).

Display Resolution - 1024 horizontal × 768 vertical pixels.

Waveform Styles - Vectors, Dots, Variable Persistence, Infinite Persistence.

Computer System and Peripherals

CPU - Intel Pentium 4 processor, 2.8 GHz.

PC System RAM - 1 GB (266 MHz DDR).

Hard Disk Drive - 40 GB removable hard disk drive: rear-panel standard or front-panel (Opt. FHD).

USB Ports - One on front panel, four on rear panel, USB 2.0 compliant.

CD-R/W Drive - Front-panel CD-R/W standard or rear-panel (Opt. FHD).

Mouse - Optical scroll-wheel model included, USB interface.

Keyboard -

Small keyboard included (fits in pouch).

Order 119-6297-xx for full-size keyboard; USB interface and hub.

Input/Output Ports

Front Panel

Fast Edge Output - Front-panel SMA connector provides fast edge signal.

TDS6000B models: Amplitude 350 mV ±20% into a ≥50 Ω load, frequency 1 kHz ±5%, 200 ps typical rise time.

TDS6000C models: Amplitude 440 mV_pk-pk, ±20% in a 50 Ω load; VOH +0.3 V, VOL - 0.14 V; frequency 1 kHz ±5%, 200 ps typical rise time.

Recovered Clock - SMA connector, ≤1.25 Gb/s, Output swing ≥130 mV_pk-pk into 50 Ω. Requires Opt. SM or Opt. ST to enable.

Recovered Data - SMA connector, ≤1.25 Gb/s, Output swing of 1010 repeating pattern 200 mV into 50 Ω. Requires Opt. SM or Opt. ST to enable.

DC Probe Calibration Output - BNC connector, ±10 VDC for DC probe calibration. (Signal available only during probe calibration.)

AUX Trigger Output - BNC connector, provides a TTL-compatible, polarity switchable pulse when the oscilloscope triggers.

USB 2.0 Port - One in front. Allows connection or disconnection of USB keyboard, mouse, or storage device while oscilloscope is on.

Rear Panel

External Timebase Reference In - BNC connector; allows timebase system to phase-lock to external 10 MHz reference.

Timebase Reference Out - BNC connector; provides TTL-compatible output of internal 10 MHz reference oscillator.

Aux Trigger Input - BNC, see Ext Trigger specification.

Parallel Port - IEEE 1284, DB-25 connector.

Audio Ports - Miniature phone jacks for stereo microphone input and stereo line output.

USB 2.0 Ports - Four in back. Allows connection or disconnection of USB keyboard, mouse, or storage device while oscilloscope power is on.

Keyboard Port - PS-2 compatible.

Mouse Port - PS-2 compatible.

LAN Port - RJ-45 connector, supports 10BaseT, 100BaseT, and 1000BaseT.

Serial Port - DB-9 COM1 port.

Windows Video Port - 15-pin D-Sub connector on the rear panel; connect a second monitor to use dual-monitor display mode allowing analysis results and plots to be viewed along with the oscilloscope display. Video is DDC2B compliant.

GPIB Port - IEEE 488.2 standard.

Scope XGA Video Port - 15-pin D-Sub connector on the rear panel, video is IBM XGA compatible. Connect to show the oscilloscope display, including live waveforms on an external monitor or projector. The primary Windows desktop can also be displayed on an external monitor using this port.

Power Source

Power - 100 to 240 V_RMS, ±10%, 50/60 Hz; 115 V_RMS ±10%, 400 Hz; CAT II, <500 W typical (650 VA).

Option SM

156 Standards Masks Supported -

ITU-T (1.544 Mb/s - 155 Mb/s)

ANSI T1.102 (1.544 Mb/s - 155 Mb/s)

Ethernet IEEE Std 802.3, ANSI X3.263 (1.544 Mb/s - 3.125 Gb/s XAUI)

Sonet/SDH (51.84 Mb/s - 2.4883 Gb/s)

Fibre Channel (133 Mb/s - 4.25 Gb/s*⁶)

InfiniBand (2.5 Gb/s)

USB (12 Mb/s - 480 Mb/s)

Serial ATA (1.5 Gb/s, 3.0 Gb/s)

Serial Attached SCSI (1.5 Gb/s, 3.0 Gb/s)

IEEE 1394b (491.5 Mb/s - 1.966 Gb/s)

Rapid I/O (1.25 Gb/s - 3.125 Gb/s)

OIF Standards (2.488 Gb/s - 3.11 Gb/s)

PCI Express (2.5 Gb/s)

*⁶ 4.25 Gb/s mask supported using Glitch Trigger.

Physical Characteristics

Benchtop Configuration
Dimensions	mm	in.
Height	282	11.1
Width	457	18.0
Depth	540	23.25
Weight	kg	lb.
Net	21	47
Shipping	32.3	71.2
Rackmount Configuration
Dimensions	mm	in.
Height	267	10.5
Width	491	19.3
Depth	638	25.1
Weight	kg	lb.
Net	22	49
Kit	5.6	12.25

Mechanical

Cooling - Required Clearance	mm	in.
Top	0 or >76	0 or >3
Bottom	25	1
Left side	76	3
Right side	76	3
Front	0	0
Rear	0	0

Environmental

Temperature

Operating -

Excluding CD-R/W drive:

TDS6000B models: +5 °C to +40 °C.

TDS6000C models: +10 ºC to +45 ºC.

Including CD-R/W drive: +10 °C to +40 °C.

Nonoperating - -22 °C to +60 °C.

Humidity

Operating - 20% to 80% relative humidity with a maximum wet-bulb temperature of +29 °C at or below +50 °C, noncondensing. Upper limit derated to 25% relative humidity at +50 °C.

Nonoperating - 5% to 90% relative humidity with a maximum wet-bulb temperature of +29 °C at or below +60 °C, noncondensing. Upper limit derated to 20% relative humidity at +60 °C.

Altitude

Operating - 10,000 ft. (3,048 m).

Nonoperating - 40,000 ft. (12,190 m).

Random Vibration

Operating - 0.000125 g²/Hz from 5 to 350 Hz, -3 dB/octave from 350 to 500 Hz, 0.0000876 g²/Hz at 500 Hz. Overall level of 0.24 g_RMS.

Nonoperating - 0.0175 g²/Hz from 5 to 100 Hz, -3 dB/octave from 100 to 200 Hz, 0.00875 g²/Hz from 200 to 350 Hz, -3 dB/octave from 350 to 500 Hz, 0.006132 g²/Hz at 500 Hz. Overall level of 2.28 g_RMS.

Certifications

Electromagnetic Compatibility - 89/336/EEC.

Safety - UL 3111-1, CSA1010.1, EN61010-1, IEC 61010-1.