TLA611

Characteristics

General

Number of Channels (all channels are acquired including clocks) - TLA601/611/621: 34 channels (2 are clock channels).

TLA602/612/622: 68 channels (4 are clock channels).

TLA603/613/623: 102 channels (4 are clock and 2 are qualifier channels).

TLA604/614/624: 136 channels (4 are clock and 4 are qualifier channels).

Channel Grouping - No limit to number of groups or number of channels per group (all channels can be reused in multiple groups).

Time Stamp - 50-Bit at 500 ps resolution (6.5 day range).

Clocking/Acquisition Modes - Internal, internal 2X, external. 2 GHz MagniVu high-speed timing is available simultaneous with all modes.

Input Characteristics (with P6417, P6418 or P6434 probes)

Capacitive Loading - 1.4 pF typical data; 2 pF typical clock (P6418).

2 pF typical data and clock (P6417 & P6434).

Threshold Selection Range - From +5.0 V to -2.0 V in 50 mV increments.

Threshold Selection Channel Granularity - Separate selection for clock (1) and data (16) for each 17-Channel probe connector.

Threshold Accuracy (including probe) - ±100 mV.

Input Voltage Range - Operating: 6.5 V_p-p centered around the programmed threshold.

Non-destructive: ±15 V.

Minimum Input Signal Swing - 250 mV or 25% of signal swing, whichever is greater (P6417 & P6418).

300 mV or 25% of signal swing (P6434).

Input Signal Minimum Slew Rate - 200 mV/ns typical.

State Acquisition Characteristics (with P6417, P6418 or P6434 probes)

State Clock Rate - 100 MHz standard, 200 MHz optional.

State Data Rate (half/full channels) - 400/200 Mb/s, typical. Requires 200 MHz state option.

State Memory Depth with Timestamps - 64 Kb, 256 Kb, 1 Mb.

Setup Time Selection Range - From 8.5 ns before, to 7.0 ns after clock edge.

Setup-and-hold Window - 2.0 ns typical.

Minimum Clock Pulse Width - 2 ns.

Active Clock Edge Separation - 5 ns.

Demux Channel Selection - Channels can be demultiplexed to other channels through the user interface with 8-Channel granularity.

Timing Acquisition Characteristics (with P6417, P6418 or P6434 probes)

MagniVu™ Timing - 500 ps (2 GHz).

MagniVu Timing Memory Depth - 2 Kb per channel.

Deep Timing Resolution (half/full channels) - 2/4 ns to 50 ms.

Deep Timing Resolution with Glitch Storage Enabled - 10 ns to 50 ms.

Deep Timing Memory Depth (half/full channels with timestamps and with or without transitional storage) - 128/64 Kb, 512/256 Kb, 2/1 Mb.

Deep Timing Memory Depth with Glitch Storage Enabled - Half of default main memory depth.

Channel-to-channel Skew - ≤1 ns typical.

Minimum Recognizable Pulse/Glitch Width (single channel) - 2 ns.

Minimum Recognizable Multi-channel Trigger Event - Sample period +2 ns.

Trigger Characteristics

Independent Trigger States -  16.

Maximum Independent If/then Clauses per State -  16.

Maximum Number of Events per If/then Clause -  8.

Maximum Number of Actions per If/then Clause -  8.

Maximum Number of Trigger Events - 18 (2 counter/timers plus any 16 other resources).

Number of Word Recognizers -  16.

Number of Range Recognizers -  4.

Number of Transition Recognizers -  1.

Number of Counter/Timers -  2.

Trigger Event Types - Word, group, channel, transition, range, anything, counter value, timer value, signal, glitch, setup-and-hold violation.

Trigger Action Types - Trigger module, trigger all, store, don't store, start store, stop store, increment counter, reset counter, start timer, stop timer, reset timer, goto state, set/clear signal, do nothing.

Trigger Sequence Rate - DC to 250 MHz (4 ns).

Counter/Timer Range - 51 Bits each (>100 days at 4 ns).

Counter Rate - DC to 250 MHz (4 ns).

Timer Clock Rate - 250 MHz (4 ns).

Counter/Timer Latency - None (can be tested or reset immediately after starting).

Range Recognizers - Double bounded (can be as wide as any group, must be grouped according to specified order of significance).

Setup-and-hold Violation Recognizer Setup Time Range - From 8 ns before to 7 ns after clock edge in 0.5 ns increments.

Setup-and-hold Violation Recognizer Hold Time Range - From 7 ns before to 8 ns after clock edge in 0.5 ns increments.

Trigger Position - Any data sample.

MagniVu Trigger Position - MagniVu data is centered around the module trigger.

Storage Control (data qualification) - Global (conditional), by state (start/stop), by trigger action, or transitional.

Storage Window Granularity - Single sample or block-of-31 samples before and after.

Integrated View (iView) Capability

TLA mainframe configuration requirements - TLA6XX instruments.

TLA App S/W V 4.1 or greater.

256 MB DRAM Minimum, 512 MB recommended.

TDS configuration requirements - TDS3GM GPIB/RS232 Interface Module required for iView capability on any TDS3000 Series. TDS3GV GPIB/RS232/VGA Interface Module required for iView capability on any TDS3000B Series. If using iView with a TDS6604, order a TCA-BNC connector to be compatible with BNC cable run from a TLA7Axx module.

Number of TDS oscilloscopes that can be connected to a TLA system -  1.

External Oscilloscopes Supported - TDS3012, TDS3014, TDS3032, TDS3034, TDS3052, TDS3054.

TDS3012B, TDS3014B, TDS3032B, TDS3034B, TDS3052B, TDS3054B, TDS5052, TDS5054, TDS5104.

TDS6604.

TDS7054, TDS7104, TDS7154, TDS7404.

TDS684C, TDS694C.

CSA7154, CSA7404.

TDS754C, TDS784C, TDS724D, TDS754D, TDS784D, TDS794D.

TLA Connections - USB, Trigger In, Trigger Out, Clock Out.

TDS Connections - GPIB, Trigger In, Trigger Out, Clock In (when available).

Setup - iView external oscilloscope wizard automates setup.

Data Correlation - After TDS oscilloscope acquisition is complete, data is automatically transferred to the TLA and time correlated with the TLA acquisition data.

Deskew - TDS and TLA data is automatically deskewed and time correlated when using the iView external oscilloscope cable.

iView External Oscilloscope Cable Length - 2 m.

TLA600 Series with TDS3000 Series oscilloscope.

TLA600 PC Characteristics

Operating System - Microsoft Windows 2000 Professional.

Processor - Intel Celeron.

Chipset - Intel 810.

DRAM - 256 MB SDRAM.

Sound - Built-in PC speaker transducer; 16-Bit I/O and Mic In port.

Hard Disk Drive - 20 GB.

CD-ROM - Internal 16/8/32 CD-RW.

Floppy Disk Drive - Built-in 3.5 in. 1.44 MB drive.

TLA600 Integral Controls (TLA61x/62x only)

Front-Panel Display - Size: 10.4 in. diagonal.

Type: Active-matrix color TFT LCD with backlight.

Resolution: 800x600.

Colors: 16.8 M (true color).

Simultaneous Display Capability - The front-panel and external displays can be used simultaneously, each with independent resolutions.

Front-panel Knobs - Special function knobs for instrument control.

Front-panel QWERTY Keypad - Mini-QWERTY keypad.

TLA600 External Peripheral Interfaces

External Display Port Type - Female DB15 SVGA connector.

External Display Resolution - Up to 1280x1024 non-interlaced at 16 M colors.

LAN Port Type - 10/100Base-T, RJ-45.

External Keyboard Port Type - PS2 mini-DIN.

External Mouse Port Type - PS2 mini-DIN.

Parallel Interface Port Type - Female DB25.

Parallel Interface Modes - Centronics mode, EPP (Extended Parallel Port), ECP (Microsoft high-speed mode).

Serial Interface Port Type - Male DB9.

Audio Out Port Type - Stereo minijack.

Mic In Port Type - Minijack.

PC Card (CardBus) Slot Types - Two slots, two PC card type I/II or one PC card type III.

USB Port - One (1).

TLA60x Logic Analyzer with external display.

TLA61x/62x Logic Analyzer with internal display.

Symbolic Support

Number of Symbols/Ranges - Unlimited (limited only by amount of virtual memory available on TLA).

Object File Formats Supported -

• IEEE695
• OMF 51, OMF 86, OMF 166, OMF 286, OMF 386
• COFF
• Elf/Dwarf 1 and 2
• Elf/Stabs
• TSF (if your software development tools do not generate output in one of the above formats, TSF or the Tektronix symbol file, a generic ASCII file format is supported. The generic ASCII file format is documented in the TLA User Manual). If a format is not listed, please contact your local Tektronix representative.

External Instrumentation Interfaces

System Trigger Output - Asserted whenever a system trigger occurs (TTL-compatible output, back-terminated into 50 Ohm).

System Trigger Input - Forces a system trigger (triggers all modules) when asserted (TTL-compatible, edge-sensitive, falling-edge latched).

External Signal Output - Can be used to drive external circuitry from a module's trigger mechanism (TTL-compatible output, back-terminated into 50 Ohm).

External Signal Input - Can be used to provide an external signal to arm or trigger any or all modules (TTL-compatible, level-sensitive).

Power

TLA60x/61x/62x - Voltage range/frequency: 90-250 VAC at 45-66 Hz.

100-132 VAC at 360-440 Hz.

Input current: 6 A maximum at 90 VAC (70 A surge).

Power consumption: 400 W maximum.

Physical Characteristics

TLA60x Logic Analyzer with external display.

TLA61x/62x Logic Analyzer with internal display.

Environmental

Temperature - Operating: +5°C to +50°C.

Nonoperating: -20°C to +60°C.

Humidity - 20% to 80%.

Operating: ≤30°C; 80% relative humidity (29°C maximum wet bulb temperature).

Nonoperating: 8% to 80% (29°C maximum wet bulb temperature).

Altitude - Operating: -1,000 ft. to 10,000 ft. (-305 meters to 3,050 meters).

Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.

LACART Instrument Cart (adjustable probe skyhook not shown).

K4000 Instrument Cart.