What is the recommended equipment for HDMI cable testing per CTS v1.3a?
Recommended Test Equipment for HDMI Compliance Testing per CTS (Compliance Test Specification) V1.3a
HDMI Cable Test
|DSA70804 or DPO70804 with Opt 2XL
|Other supported oscilloscopes 1,2
|DSA71254, DSA71604, DSA72004, DPO71254 with opt 2XL, DPO71604 with Opt 2XL, DPO72004 with Opt 2XL, TDS6804B, TDS6124C and TDS6154C
|TDSHT3 - HDMI compliance software (support for CTS V1.3a requires software Version 3.3.0 or higher)
|P7313SMA differential SMA probe - use for all differential and single-ended measurements
|DSA8200 with (1) 80E03 and (1) 80E04 module (for Cable Inter-pair Skew and Far-End Crosstalk tests)
|TPA-P TPA-R and EDID fixtures from Efficere Technologies. Order a set as ET-HDMI-TPA-S
|DTG5334 with 3 DTGM30 modules
Transition Time Converters from Picosecond Pulse Labs
TTC hardware filters for cable test will not be required as TDSHT3 provides the software TTC filters.
|Minimum 2 sets
|NI-GPIB-USB - A/B/HS with Driver Software from National Instruments. Type B/HS is recommended for use with DPO/DSA70000 series scopes.
1 Oscilloscopes with bandwidth less than 8 GHz will only support HDMI testing at limited resolution and clock/data rates.
2 16M per channel or greater record length is required for HDMI Compliance
常见问题 ID 53536查看所有常见问题 »