联系我们

与泰克代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

Tektronix PCIe 4.0 (CEM) and PCIe 5.0 (Base and CEM) Receiver Test Automation Software

Tektronix PCIe 4.0 (CEM) and PCIe 5.0 (Base and CEM) Receiver Test Automation Software is based upon the procedures described in the PCI-SIG Compliance Test Specification (CTS) document. Receiver testing involves calibrating the set-up and then proceeding with various tests as laid down in the specification. These tests are accomplished by connecting the BERT (which can produce specific PCIe test patterns) to the input of the DUT through a specialized set of fixtures and cables. The BERT can be programmed to add different amounts of random jitter, sinusoidal jitter, differential, and common mode interference along with variable signal amplitude, pre-shoot, and de-emphasis. The output of the DUT is connected to the BERT error detector to identify bit errors on the DUT Tx traffic, either during loopback or during the sweep of one of the stress parameters

此软件适用于: DPS77004SX, DPS75904SX, DPS75004SX, DPO73304SX

相关产品信息