新选项
- 利用自定义模板定义执行通过/失败模板和波形极限测试
- 逆变器、电机和驱动器分析
- PSI5 协议解码
- NRZ 协议解码
- 8b10b 协议解码
- MIPI I3C 协议解码
- LVDS 自动测量和分析
- 模拟视频触发（NTSC、PAL、SECAM）
使用高级分析选项在仪器上免费升级
- 配备模板测试选件的仪器将获得极限测试功能
下载
下载
下载手册、产品技术资料、软件等：
联系我们
联系我们
与泰克代表实时聊天。 工作时间：上午 6:00 - 下午 4:30（太平洋标准时间）。
5 系列 MSO 混合信号示波器
5 系列 MSO 具有支持手指开合、滑动和缩放操作的创新触摸屏用户界面、超大的高分辨率显示器以及 4、6 或 8 条 FlexChannel™ 输入通道，能够应对当前以及未来严苛的应用挑战。 它为性能、分析和整体用户体验设立了新的标准。
不仅仅采用新显示器和用户界面， 更是新标准。
配有 15.6 英寸高清触摸屏，让您获取更大图像和整体操作控制能力。使用支持手指开合、缩放和滑动的电容式触摸屏、前面板控件或鼠标分析和管理多个信号，而不必使用菜单操作。
拥有足够的通道。
提供 4、6 或 8 条 FlexChannel 输入通道。每条通道可用于观察 1 个模拟信号或 8 个数字逻辑信号，只需更改探头即可实现。将任何模拟信号显示为高分辨率波形、频谱或两者，并为每个域提供独立的采集控制。
支持高达 16 位的垂直分辨率，每个细节都不会错过。
12 位模拟到数字转化器，使用高级数字信号处理提供高达 16 位垂直分辨率。 对于叠加在大信号上的微小信号也能直接观察和测量到信号的细节。
立即购买所需产品。 根据您的测试需求变化进行扩展。
性能
- 高达 2 GHz 带宽
- 高达 125 M 点记录长度
数字输入
- TLP058 逻辑探头，每个探头可提供 8 条数字通道
操作系统
- 添加 Windows 操作系统，以便在示波器上运行 PC 软件
信号发生器
- 添加内置任意波形/函数发生器
高级分析
- 串行解码/触发支持 I2C、SPI、USB 2.0、以太网、CAN、LIN 等多种总线
- 自动对以太网、USB 2.0 和汽车以太网进行一致性测试
- 高级抖动分析
- 自动功率测量和分析
- 低噪声纹波测量
新功能和选项让这款优秀的示波器表现更佳
包装箱里有什么物品？
显示为
8 通道 MSO58 型号
8 通道 MSO58 型号
- 每个输入通道 1 个无源探头
- 选择 350 或 500 MHz 带宽选项时，TPP0500B (500 MHz)
- 当选择 1 或 2 GHz 带宽选项时，TPP1000 (1 GHz)
- 针对随附探头的 1 年保修
- 针对仪器的 3 年保修
- 鼠标、电源线和附有附件袋的前盖
- 印刷的安装手册涵盖安全和基本操作
- 全面的集成在线帮助
- 追溯证明
意外发生。 确保您受到保护。
我们拥有业内独具优势的意外损坏保护的计划。 是的，其中包括屏幕损坏、溢出、安装架损坏、静电放电或电子过载事件。 使用我们的“全面呵护计划”降低意外维修或更换成本。 观看视频或单击下方了解详情。
| 型号 | 模拟带宽 | 采样率 | 记录长度 | 模拟通道 | 数字通道数 | 函数发生器输出 | 报价 |
|---|---|---|---|---|---|---|---|
| MSO54 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 4 | 可达 32 条（可选） | 1 条（可选） |
US $14,500 配置和报价 |
| MSO56 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 6 | 可达 48 条（可选） | 1 条（可选） |
US $18,100 配置和报价 |
| MSO58 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 8 | 可达 64 条（可选） | 1 条（可选） |
US $24,300 配置和报价 |
价格：价格如有变更，恕不另行通知。
| 型号 | 模拟带宽 | 采样率 | 记录长度 | 模拟通道 | 数字通道数 | 函数发生器输出 | 报价 |
|---|---|---|---|---|---|---|---|
| MSO54 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 4 | 可达 32 条（可选） | 1 条（可选） |
US $14,500 配置和报价 |
| MSO56 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 6 | 可达 48 条（可选） | 1 条（可选） |
US $18,100 配置和报价 |
| MSO58 | 350 MHz 至 2 GHz | 6.25 GS/s | 62.5 M 点至 125 M 点 | 8 | 可达 64 条（可选） | 1 条（可选） |
US $24,300 配置和报价 |
价格：价格如有变更，恕不另行通知。
| 泰克 5 系列 MSO |
泰克 MSO/DPO5000B |
Keysight S 系列 |
LeCroy HDO6000A/HDO8000A |
Rohde & Schwarz RTO2000 |
Yokogawa DLM4000 系列 |
|
|---|---|---|---|---|---|---|
| 详细比较 | -- | -- | 速查资料 | 速查资料 | 速查资料 | 速查资料 |
| 带宽 | 350 MHz 至 2 GHz | 350 MHz 至 2 GHz | 500 MHz 至 8 GHz | 350 MHz 至 1 GHz | 600 MHz 至 6 GHz | 350 MHz，500 MHz |
| 可升级带宽 | 是 | 否 | 是 | 否 | 是 | 否 |
| 模拟通道 | 4、6 或 8 | 4 | 2 或 4 | 4 或 8 | 2 或 4 | 8 |
| 模拟采样率（所有通道） | 高达 6.25 GS/s | 高达 5 GS/s | 高达 10 GS/s | 高达 2.5 GS/s | 高达 10 GS/s | 2.5 GS/s |
| 标配记录长度（所有通道） | 62.5 M | 25 M | 50 M | 50 M | 50 M | 25 M |
| 集成任意波形/函数发生器 | 50 MHz（可选） | -- | -- | -- | 100 MHz（可选） | -- |
| 数字通道（MSO 系列） | 可达 64 条（可选） | 16 条（可选） | 16 条（可选） | 16 条（可选） | 16 条（可选） | 8（标配）/ 24（选配） |
| ADC 分辨率 | 12 位 | 8 位 | 10 位 | 12 位 | 8 位 | 8 位 |
| 波形捕获率 | >500,000 波形/秒 | 250,000 波形/秒 | <1,100 波形/秒 | <700 波形/秒 | 1,000,000 波形/秒 | N/A |
| 操作系统 | 封闭式 Linux 开放式 Windows（选配） |
开放式 Windows | 开放式 Windows | 开放式 Windows | 开放式 Windows | 已关闭 |
| 标准探头 | 高达 1 GHz 无源 < 3.9 pF 负载 |
高达 1 GHz 无源 < 3.9 pF 负载 |
500 MHz Passive 9.5 pF loading |
500 MHz 无源 10 pF 负载 |
500 MHz 无源 10 pF 负载 |
500 MHz 10.5 pF 负载 |
| 标准保修 | 3 年 | 1 年 | 3 年 | 3 年 | 3 年 | ? |
嵌入式串行总线分析
自动串行总线解码可节省时间并消除手动解码时的错误。 串行总线触发和搜索允许隔离事件，便于系统级故障排除。
特点
- I2C，SPI
- I3C
- USB 2.0
- 以太网
- SPMI
- CAN, CAN FD, LIN, FlexRay
- SENT
- I2S/LJ/RJ/TDM
- ARINC 429、MIL-STD-1553
自动串行总线分析
汽车设计人员可以依靠串行总线在 ECU、传感器与制动器之间实现准确通信。 5 系列 MSO 还具有 CAN、CAN FD、LIN、FlexRay 和 SENT 解码和触发功能，可帮助其同步了解系统。 自动汽车以太网一致性套件供您按照标准测试，您无需成为高速总线专家。
抖动分析
时钟在每个嵌入式系统和数字通信链路的中间位置。 抖动和其他时钟失真可能会影响系统运行，而不使用正确的分析工具将很难了解其根源。
特点
- 标准相位噪声、时钟抖动和定时以及波形直方图
- 选配高级分析、抖动分解和时钟恢复
功率电子
让电源质量、谐波、开关损耗、安全操作区测量更可靠且可重复，还带自动功率测量与分析包。 5 系列 MSO 具有高达 8 条高分辨率通道和多种可用探头，也适合评估电源时序并深入了解 3 相电源转换器。
特点
- 电源质量和谐波
- 开关损耗和安全作业区
- 电路内电感器和变压器分析
- 多输出效率
电源完整性
如今的电路板可以有 20 个或更多的电源轨。其中有许多只有几伏，且有严格的噪音限制。需要特别注意准确测量。
特点
- 数字电源管理选件可自动执行纹波和开/关测量
- 多达 8 条模拟输入通道
- 兼容低噪音 TPR 系列电源轨探头
| 产品技术资料 | 软件包 / 软件选件 | 描述 | 配置和报价 |
|---|
访问数字通道
| 升级 | 描述 | 采购详情 |
|---|---|---|
| TLP058 逻辑探头 | 各探头访问任一 5 系列 MSO 上任何 FlexChannel 上的 8 条数字通道 | 索取此探头的报价 |
增加仪器功能
| 升级 | 描述 | 采购详情 |
|---|---|---|
| SUP5-AFG | 增加任意函数发生器 | 申请试用许可证 索取报价 |
| SUP5-DVM | 增加数字电压表/触发频率计数器 | 注册时提供的软件升级许可文件。 立即注册。 |
| SUP5-RL-125M | 将记录长度增至 125 M 点/通道 | 申请试用许可证 索取报价 |
| SUP5-WIN | 增加安装 Windows 10 系统许可的可移除固态硬盘。 | 无法试用 索取报价 |
增加协议分析
| 升级 | 描述 | 采购详情 |
|---|---|---|
| SUP5-SR8B10B | 8b10b 协议解码器和搜索 | 申请试用许可证 索取报价 |
| SUP5-SRAERO | 航空串行触发和分析（MIL-STD-1553、ARINC429） | 申请试用许可证 索取报价 |
| SUP5-SRAUDIO | 音频串行触发和分析（I2S、LJ、RJ、TDM） | 申请试用许可证 索取报价 |
| SUP5-SRAUTO | 汽车串行触发和分析（CAN、CAN FD、LIN 和 FlexRay） | 申请试用许可证 索取报价 |
| SUP5-SRAUTOEN1 | 100BASE-T1 汽车以太网协议解码软件 | 申请试用许可证 索取报价 |
| SUP5-SRAUTOSEN | 汽车传感器串行触发和分析 (SENT) | 申请试用许可证 索取报价 |
| SUP5-SRCOMP | 计算机串行触发和分析 (RS-232/422/485/UART) | 申请试用许可证 索取报价 |
| SUP5-SREMBD | 嵌入式串行触发和分析模块（I2C、SPI） | 申请试用许可证 索取报价 |
| SUP5-SRENET | 以太网串行触发和分析（10Base-T、100Base-TX） | 申请试用许可证 索取报价 |
| SUP5-SRI3C | MIPI I3C 解码和分析 | 申请试用许可证 索取报价 |
| SUP5-SRNRZ | NRZ 协议解码器和搜索 | 申请试用许可证 索取报价 |
| SUP5-SRPM | 电源管理串行触发和分析 (SPMI) | 申请试用许可证 索取报价 |
| SUP5-SRPSI5 | PSI5 串行解码和分析 | 申请试用许可证 索取报价 |
| SUP5-SRSPACEWIRE | SpaceWire 协议解码和分析 | 申请试用许可证 索取报价 |
| SUP5-SRUSB2 | USB 2.0 串行总线触发和分析（LS、FS、HS）（HS 的 ≥ 1 GHz 建议模型） | 申请试用许可证 索取报价 |
增加串行一致性分析
| 升级 | 描述 | 采购详情 |
|---|---|---|
| SUP5-CMAUTOEN | 汽车以太网（100Base-T1 和 1000BASE-T1）自动化一致性测试解决方案 | 申请试用许可证 索取报价 |
| SUP5-CMUSB2 | USB 2.0 自动化一致性预测试解决方案 | 申请试用许可证 索取报价 |
| SUP5-CMENET | 以太网 (10/100/1000BASE-T) 一致性测试解决方案 | 申请试用许可证 索取报价 |
| SUP5-DBLVDS | 适用于 5 系列 MSO 示波器的自动化 LVDS 测试解决方案 | 申请试用许可证 索取报价 |
| SUP5-AUTOEN-BND | 汽车以太网一致性、信号分离、PAM3 分析、100BASE-T1 解码软件 | 申请试用许可证 索取报价 |
| SUP5-AUTOEN-SS | 使用 TekExpress 自动化平台的信号分离解决方案（最小带宽 1 GHz） | 申请试用许可证 索取报价 |
| SUP5-CMINDUEN10 | 工业以太网（10Base-T1L 长距离）自动化一致性测试解决方案 | 申请试用许可证 索取报价 |
| SUP5-PAM3 | 使用 TekExpress 自动化平台的 PAM3 自动化一致性解决方案（最小带宽 1 GHz） | 申请试用许可证 索取报价 |
增加高级分析
| 升级 | 描述 | 采购详情 |
|---|---|---|
| SUP5-DPM | 完整的数字电源管理分析和调试解决方案（包括 DPMBAS 中的所有测量 + 抖动分析和眼图分析） | 申请试用许可证 索取报价 |
| SUP5-DPMBAS | 基本数字电源管理分析和调试解决方案（包括电源序列分析、瞬态分析和纹波分析） | 申请试用许可证 索取报价 |
| SUP5-DJA | 高级抖动和眼图分析 | 申请试用许可证 索取报价 |
| SUP5-IMDA | 逆变器、电机和驱动器分析 | 申请试用许可证 索取报价 |
| SUP5-MTM | 模板和极限测试 | 申请试用许可证 索取报价 |
| SUP5-PWR | 功率分析 | 申请试用许可证 索取报价 |
| SUP5-SV-BW-1 | 频谱视图捕获带宽达 500 MHz | 申请试用许可证 索取报价 |
| SUP5-SV-RFVT | 频谱视图射频与时间分析 | 申请试用许可证 索取报价 |
| SUP5-VID | 模拟视频触发（NTSC、PAL、SECAM） | 申请试用许可证 索取报价 |
升级带宽
| 升级 | 描述 | 采购详情 |
|---|---|---|
| SUP5-BWxTy8 | MSO58 带宽从 x 升级为 y，其中，x 和 y 均为几百 MHz |
|
| SUP5-BWxTy6 | MSO56 带宽从 x 升级为 y，其中，x 和 y 均为几百 MHz | |
| SUP5-BWxTy4 | MSO54 带宽从 x 升级为 y，其中，x 和 y 均为几百 MHz |
|
5 系列混合信号示波器 (MSO)
文献编号： 48C-60850-12 |
Datasheet | |
|
5 Series Mixed Signal Oscilloscope
MSO54, MSO56, MSO58 Installation and Safety
User Manual
This manual describes installing and setting up the 5 Series oscilloscope, and introduces the User Interface and basic oscilloscope operations. 部件号： 071351400 |
主要用户 | |
|
CSharp Extract Trigger Timestamp from .wfm File_使用CSharp分析wfm波形_读取触发时间
本例程提供了基本使用C#分析示波器采集的波形WFM数据，并读取触发的时间位置；程序会读取目录下所有的wfm文件，并且输出每一个wfm中触发的时间。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
MATLAB ICT plot points_通过Matlab绘制波形
使用Matlab从示波器中读取波形数据并绘制。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
利用多种工具，把示波器测量分辨率提高到11 位以上
在进行高分辨率测量时，您可以把数字示波器看作一个整体系统，来改善测量结果。在对示波器工作模式、探头性能特点、过滤技术及整个系统交互方式有了基 本了解之后，您可以改善小信号细节的测量效果。
文献编号： 48W-27802-4 |
应用指南 | |
|
Tektronix 示波器附件选择指南
示波器探头相互参考, 无源探头， 有源探头， 差分探头和差分前置放大器， 电流探头， 高压探头和高压差分探头， 连接器和适配器， 光电转换器， 衰减器, 端接器和电缆， 仪器手推车/机架安装套件， 探头尖附件
文献编号： 60W_14232_10 |
产品选择器指南 | |
|
了解和表征定时抖动入门手册
在采用电压跳变表示定时信息的所有电气系统中，定时抖动都是不受欢迎的伴生产物。本文主要介绍电系统中的抖动。
文献编号： 55T-16146-5 |
入门手册 | |
|
了解和进行USB 2.0 物理层测试
涉及USB 2.0设备设计、检测和验证的工程师每天都面临着加快新产品开发周期的压力。通过泰克完善的系列工具，设计人员可以迅速准确地执行USB实现者论坛组织(USB-IF)推荐的所有一致性测试。通用串行总线 (USB 2.0)是一种连接规范，它面向的是计算机外部连接的外设，以消除打开计算机机箱、为某些设备安装所需板卡的麻烦。对用户来说，USB标准设备意味着易用性、扩展能力和速度。USB 2.0 设备设计人员必须正确检定设计，验证是否满足行业标准，然后设备制造商才能在包装上贴上"通过认证"的USB …
文献编号： 55W-61400-0 |
应用指南 | |
|
使用任意波形 函数发生器复现真实世界信号
这篇应用文章将给您关于泰克AFG3000系列以及ArbExpress应用软件的详细的步骤演示
文献编号： 76W-18661-2 |
应用指南 | |
|
低电容探头最大限度地降低对电路操作的影响
本应用指南介绍了泰克高带宽，低电容无源电压探头怎样降低示波器用户的总拥有成本、改善性能和测量精度及节约用户设置时间。大多数示波器标配的无源电压探头都提供了低成本通用探测解决方案。一般来说，这些探头没有有源电压探头的性能，但坚固耐用、动态范围宽，适合查看信号。
文献编号： 51C-26294-5 |
应用指南 | |
|
调试嵌入式系统设计中的串行总线
今天，嵌入式系统几乎遍布在人类社会的每个角落。嵌入式系统可以简单定义为属于大型系统或机器一部分的一种专用计算机系统，其目的是为该系统或机器提供监测和控制服务。典型的嵌入式系统在开机时会开始运行某些专用应用，直到关闭时才会停止。当前设计和生产的几乎每个电子设备都是嵌入式系统。
了解使用泰克示波器强大的触发、解码和搜索功能怎样以极高的效率解决串行调试挑战。
文献编号： 48W-19040-21 |
应用指南 | |
|
汽车以太网：查看真实信号
随着汽车行业加快转向汽车以太网技术，全方位设计验证对保证多个ECU 之间的互操作能力和可靠运行至关重要。本应用指南介绍了汽车以太网、全双工通信、隔离主信号与从信号的需求、信号分隔测试方法，以及当前定向耦合器插入方法与泰克新型信号隔离方法比较。
文献编号： 48W-61604-0 |
应用指南 | |
|
低电容探头最大限度地降低对电路操作的影响
本应用指南介绍了泰克高带宽，低电容无源电压探头怎样降低示波器用户的总拥有成本、改善性能和测量精度及节约用户设置时间。大多数示波器标配的无源电压探头都提供了低成本通用探测解决方案。一般来说，这些探头没有有源电压探头的性能，但坚固耐用、动态范围宽，适合查看信号。
文献编号： 51W-26294-6 |
应用指南 | |
|
使用示波器调试USB 2.0问题
了解USB 2.0物理层基础知识，以调试总线问题或系统问题。了解在配备USB 2.0总线分析功能的示波器上使用自动解码、触发和搜索功能时，怎样设置示波器，理解测试结果。
文献编号： 55W-61092-1 |
应用指南 | |
|
使用FlexChannel® 技术灵活配置示波器输入通道应对多总线系统调试
本应用指南讨论了嵌入式系统设计人员在评估多总线系统时面临的挑战，以及怎样使用FlexChannel 输入通道克服这些挑战。 新型FlexChannel 输入通道可以使用范围最广泛的探头，满足 测量多个不同信号的需求。
本应用指南讨论了嵌入式系统设计人员在评估多总线系统时面临的挑战，以及怎样使用flexchannel>
文献编号： 55W-61100-2 |
技术简介 | |
|
Wave Inspector® ：简化波形分析
随着摩尔定律推动着电子技术的速度不断加快，系统设计正变得越来越复杂，其设计、构建、调试及中断修复越来越困难。这一切对现代示波器又意味着什么呢？现代数字示波器可以捕获海量数据。直到现在，搜索这些数据一直是一个耗时麻烦的过程。通过泰克WaveInspector® 导航和搜索功能，您可以以不同于任何其它示波器的效率和精度，获得所需的答案。
文献编号： 48T-19039-9 |
应用指南 | |
|
使用8 通道示波器检验电源顺序
本应用指南中使用的仪器是配备8 个FlexChannel® 输入的5系列混合信号示波器。每个输入可以测量一个高分辨率模拟信号，或者通过连接一只TLP058逻辑探头，来测量8 个数字逻辑输入。
文献编号： 55W-61152-0 |
应用指南 | |
|
泰克新5系示波器PWR电源自动测量和分析功能
优化和验证电源设计需要许多重要的测量。这些包括:
电源质量测量，如有功功率，功率因数，效率和谐波预一致性测量等
开关器件测量（含GaN,SiC）,如开关损耗和安全操作区域等测试
输出电源测量，如纹波
尽管许多测量项目可以手工测量或者理论计算获得，但许多工程师希望能使用示波器及功率分析软件，实现可量化，自动化测量评价，从而提供可靠，可重复的测试结果。
本应用指南将概括介绍怎样使用泰克新5 系混合信号示波器结合5-PWR 功率分析软件进行重要的电源测量。
文献编号： 55W-61294-3 |
应用指南 | |
|
使用泰克示波器和选配软件支持串行总线
泰克示波器提供了一系列选配的分析功能，简化了串行总线调试或一致性检验。本选型指南说明了示波器系列中每款产品支持哪些串行标准。
文献编号： 55W-29028-13 |
选型指南 | |
|
航空和国防解决方案
70多年来，泰克一直提供各种电子测试测量解决方案，旨在满足军事应用和政府应用的独特需求。在这本手册中，您可以进一步了解我们提供的各种解决方案。
文献编号： 46A-61169-2 |
手册 | |
|
示波器选型指南
从基本信号校验到高性能分析，这份12页的选型指南概括介绍了泰克全系列示波器。对照表给出了高级指标和特点，指明了每个系列的示波器之间的主要差异。下载PDF了解更多
文献编号： 46W-31080-7 |
选型指南 | |
|
使用示波器排除以太网问题
了解 10BASE-T 和 100BASE-TX 以太网物理层的基本知识，帮助您排除总线问题或相关系统问题。 了解如何在配备以太网分析功能的示波器上使用自动解码、触发和搜索功能时设置和解释结果。
文献编号： 55W-61093-1 |
应用指南 | |
|
我的示波器使用什么机架安装？
示波器系列
机架安装
TDS1000/TDS2000
RM2000
TDS1000B/TDS2000B/TDS2000C
RM2000B
TPS2000/TPS2000B
无机架安装 - 皮带吊架 343-1689-00
TDS3000/TDS3000B/TDS3000C
RM3000
DPO2000
RMD2000
…
|
常见问题 ID64571 | |
|
1.5 GHz Active Probe
TAP1500 Single-ended Active FET Probe provides excellent high-speed electrical and mechanical performance required for today's digital system designs.
文献编号： 51W-19043-8 |
Datasheet | |
|
TekExpress Ethernet Compliance Solution
TekExpress Ethernet Compliance Solution
This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software. 部件号： 077150404 |
主要用户 | |
|
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version V1.26.x 部件号： 077130311 |
主要用户 | |
|
TekExpress Automotive PAM3 Analysis Application
TekExpress Automotive PAM3 Analysis Application
Automotive Ethernet operates as a full-duplex communication link over a twisted-pair cable. The Full-Duplex communication, along with PAM3 signaling, adds complexity in validating the Electronic Control Units (ECU) in real-world conditions. The TekExpress Automotive PAM3 Analysis application includes unique Signal Separation capability and Electrical analysis. 部件号： 077160601 |
用户 | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.24.x. 部件号： 077130510 |
程序员 | |
|
TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution
TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution for 5/6 Series Mixed Signal Oscilloscope (MSO)
This document contains operation information for the TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution. It is a PDF version of the help system accessible in the TekExpress software. 部件号： 077167900 |
主要用户 | |
|
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.22.x. 部件号： 077130310 |
主要用户 | |
|
5/6 Series MSO with Option 5-SEC or 6-SEC Enhanced Security
Instrument Declassification and Security Instructions
This document describes how to clear or sanitize 5 Series and 6 Series MSO instruments that have option 5-SEC or 6-SEC installed, to allow removal from a secured area, or returning the instrument for repair. 部件号： 077140802 |
解密 | |
|
5 Series MSO (MSO54, MSO56, MSO58, MSO58LP)
Specifications and Performance Verification
For firmware version 1.4 and above. This document contains the specifications and performance verification procedures for the instruments. 部件号： 077130605 |
性能验证 | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.22.x. 部件号： 077130509 |
程序员 | |
|
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes
The application provides more visibility into your Ethernet designs with 1000BASE-T/100BASE-TX/10BASE-T PHY measurements as outlined in IEEE 802.3 Section 40, ANSI X3.263, and IEEE 802.3 Section 14 specific measurements for different Ethernet standards to the already existing rich tool set of generic jitter, timing, and signal quality measurements in Tektronix Oscilloscope. 部件号： 077163501 |
用户 | |
|
TekExpress Ethernet Compliance Solution
TekExpress Ethernet Compliance Solution
This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software. 部件号： 077150403 |
主要用户 | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.20.x. 部件号： 077130508 |
程序员 | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
Revision A: This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.16.x. 部件号： 077130507 |
程序员 | |
|
TekExpress Industrial Ethernet Compliance Solution
TekExpress Industrial Ethernet Compliance Solution
This document contains operation information for the TekExpress Industrial Ethernet Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software. 部件号： 077162400 |
主要用户 | |
|
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.20.x. 部件号： 077130308 |
主要用户 | |
|
TekExpress Automotive PAM3 Analysis Application
TekExpress Automotive PAM3 Analysis Application
Automotive Ethernet operates as a full-duplexcommunication link over a twisted-pair cable. The Full-Duplex communication, along with PAM3 signaling, adds complexity invalidating the Electronic Control Units (ECU) in real-world conditions. The TekExpress Automotive PAM3 Analysis applicationincludes unique Signal Separation capability and Electrical analysis. 部件号： 077160600 |
用户 | |
|
4/5/6 Series MSO Option License
Install Instructions
This document describes how to install optional upgrade licenses to add new functions or features to 4/5/6 Series MSO instruments (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64). 部件号： 071351902 |
现场安装说明 | |
|
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.14. 部件号： 077130506 |
程序员 | |
|
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.12. 部件号： 077130505 |
程序员 | |
|
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO
This document specifies the reference waveform file format for the instrument. 部件号： 077022011 |
程序员 | |
|
RM5
Rackmount Kit for 5/6 Series MSO
This document supports installing Tektronix 5/6 Series instruments in a rackmount kit to fit in a standard 19-inch equipment rack. 部件号： 071352302 |
现场安装说明 | |
|
5/6 Series MSO With Option 5-SEC Enhanced Security
Instrument Declassification and Security Instructions
This document describes how to clear or sanitize 5 Series MSO instruments (MSO54, MSO56, MSO58) that have option 5-SEC installed, to allow removal from a secured area, or returning the instrument for repair. 部件号： 077140801 |
解密 | |
|
5/6 Series MSO MSO5, MSO56, MSO58, MSO58LP, MSO64
Install Upgrade Options
This document describes how to install optional upgrade licenses to add new functions or features to 5/6 Series MSO instruments (MSO54, MSO56, MSO58, MSO58LP, MSO64). 部件号： 071351901 |
现场安装说明 | |
|
5/6 Series MSO Option SUP5-WIN, SUP6-WIN
SSD with Microsoft Windows 10 Upgrade Kit
This document describes how to install the Microsoft Windows 10 environment SSD option on the 5/6 Series MSO instruments (MSO54, MSO56, MSO58, MSO64), and how to activate Windows after installation. 部件号： 071352401 |
现场安装说明 | |
|
5 Series MSO
MSO54, MSO56, MSO58 Installation and Safety
This manual describes installing and setting up the 5 Series oscilloscope, and introduces the User Interface and basic oscilloscope operations. 部件号： 071351401 |
用户 | |
|
Read This First
Update your 5/6 Series MSO with the latest firmware
This is a reminder to update your instrument with the latest firmware. 部件号： 061442001 |
现场安装说明 | |
|
5 Series MSO
MSO54, MSO56, MSO58
This manual provides theory of operation, service instructions, and a list of replaceable parts for the 5 Series MSO instruments. 部件号： 077130700 |
维修 | |
|
Tektronix Demo 3 Board Instruction Manual
Demo 3 Board Instruction Manual
This document describes the operation of the Tektronix Demo 3 Board. The Demo 3 board provides signals to demonstrate key Tektronix instrument features. 部件号： 071286202 |
培训/教程 | |
|
TekExpress Ethernet (1000BASE-T/ 1000Base-T Multipair, 100BASE-TX and 10BASE-T) Compliance Solution - 5 and 6 Series MSO - V1.2.2
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX, 1000Base-T and 1000Base-T Multipair technologies in their labs. This application …
部件号： 066196757 |
应用 | |
|
TekExpress Automotive PAM3 Analysis Solution - MSO5 and MSO6 series - V1.1.0
The Tektronix TekExpress Automotive PAM3 Analysis is an automated test solution for performing Signal Separation on a Full duplex of 100BASE-T1 and 1000BASE-T1 Automotive Ethernet signals at system level.User can use this application to perform …
部件号： 066209600 |
应用 | |
|
5 SERIES MSO (windows) OS FIRMWARE-V1.26
Download this firmware to install the latest updates for the 5 Series MSO. This firmware only applies to oscilloscopes that do have option 5-WIN (Windows 10) installed.
部件号： 066196510 |
固件 | |
|
5 SERIES MSO (non-windows) OS FIRMWARE-V1.26
Download this firmware to install the latest updates for the 5 Series MSO. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
部件号： 066196410 |
固件 | |
|
TekExpress Automotive Ethernet (10BASE-T1S/100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.3.0
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 10BASE-T1S (IEEE Std 802.3cg) standard, 100BASE-T1 (IEEE Std.802.3bw) and 1000BASE-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test …
部件号： 066208900 |
应用 | |
|
5 Series MSO (Windows OS) Firmware - V1.24.9
Download this firmware to install the latest updates for the 5 Series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 5-WIN (Windows 10) installed.
部件号： 066196509 |
固件 | |
|
5 Series MSO (non-Windows) Firmware - V1.24.9
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
部件号： 066196409 |
固件 | |
|
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance. The …
部件号： 066186014 |
应用 | |
|
5 Series MSO (Windows OS) Firmware - V1.22.4
Download this firmware to install the latest updates for the 5 Series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 5-WIN (Windows 10) installed.
部件号： 066196507 |
固件 | |
|
5 Series MSO (non-Windows) Firmware - V1.22.4
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
部件号： 066196407 |
固件 | |
|
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - 5 and 6 Series MSO - V1.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …
部件号： 066196755 |
应用 | |
|
4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI …
部件号： 066192807 |
驱动程序 | |
|
Tektronix TekExpress LVDS Automated test solution on the 5/6 Series MSO V1.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization.
部件号： 066170911 |
应用 | |
|
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
部件号： 066093812 |
驱动程序 | |
|
TekExpress Industrial Ethernet (10BASE-T1L) Automated Compliance Solution - MSO5 and MSO6 series - V1.0.0
TekExpress Industrial Ethernet Compliance Solution - MSO 5000 and 6000The TekExpress Industrial Ethernet application (10Base-T1L) is a compliance test solution for performing transmitter electrical specification measurements and MDI return loss …
部件号： 066203600 |
应用 | |
|
TekExpress Automotive PAM3 Analysis Solution - MSO5 and MSO6 series - V1.0.0
The Tektronix TekExpress Automotive PAM3 Analysis is an automated test solution for performing Signal Separation on a Full duplex 100BASE-T1 Automotive Ethernet signals at system level. User can perform measurements like eye height and eye width can …
部件号： 066203300 |
应用 | |
|
4, 5 and 6 Series Mixed Signal Oscilloscope IVI-COM Driver - V1.5.0
The TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes is an IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver …
部件号： 066192806 |
驱动程序 | |
|
5 Series MSO (non-Windows) Firmware - V1.16.6
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
部件号： 066196405 |
固件 | |
|
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical test specification as per Open Alliance. The …
部件号： 066186013 |
应用 | |
|
5 Series MSO (non-Windows) Firmware - V1.14.13
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
部件号： 066196404 |
固件 | |
|
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance …
部件号： 066186012 |
应用 | |
|
5-CMUSB2, 6-CMUSB2 - 5 Series MSO, 6 Series MSO - V1.2.3
The Tektronix USB2.0 compliance test application (Opt. 5-CMUSB2, Opt. 6-CMUSB2) running on a 5 Series MSO and 6 Series MSO oscilloscope provides a one-button compliance testing for USB2.0 devices, hosts, and hubs. The USB software automates the …
部件号： 066166808 |
应用 | |
|
Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
Debugging embedded systems often involves looking for clues that are hard to discover just by looking at one domain at a time. The ability to look at time and frequency domains simultaneously can offer important insights.
FIGURE 1. Spectrum …
文献编号： 48W-61563-2 |
应用指南 | |
|
EMI Troubleshooting with the Latest-Generation Oscilloscopes
This application note describes techniques using an oscilloscope that can help you determine the source of unwanted radiated emissions (EMI), especially after an out-of-limits condition has been identified through formal testing or pre-compliance …
文献编号： 48W-61644-1 |
应用指南 | |
|
5 Series MSO Upgrade Guide
Many of the features of the 5 Series MSO are field-upgradable, including bandwidth, record length, arbitrary/function generator, logic channels, and protocol support. This 2-page fact sheet lists all available post-purchase upgrades.
文献编号： 55W-61103-11 |
速查资料 | |
|
Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical layer and packet structures of the I3C protocol. It …
文献编号： 48W-61676-0 |
应用指南 | |
|
Next-Generation Oscilloscopes Brochure - 3 Series MDO, 4 Series MSO, 5 Series MSO, 6 Series MSO
The 3 Series MDO and 4, 5 and 6 Series MSOs offer the largest displays and the greatest user experience of any oscilloscope. This brochure gives an overview of the platforms, with the similarities and differences between the four series.
文献编号： 48W-61573-0 |
手册 | |
|
Tek049 ASIC Powers Next-Generation Oscilloscopes
The Tek049 is a new mixed-signal oscilloscope ASIC. It consists of 400 million transistors which make up its high-speed, precision ADCs and integrated DSP. The Tek049 recently debuted as the powerhouse behind Tek’s new 5 Series MSO and will power …
文献编号： 55W-61320-0 |
白皮书 | |
|
Yokogawa DLM4000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Yokogawa DLM4000 Series
文献编号： 65W-61251-0 |
竞争 | |
|
Electronics Engineering For Cleaner Skies
How Tektronix products have helped the RAISE project take off
|
成功案例 | |
|
Using FastFrame Segmented Memory on the 4/5/6 Series MSO
Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on …
文献编号： 55W-61299-2 |
技术简介 | |
|
Getting Started with Power Rail Measurements Application Note
No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling …
文献编号： 51W-61562-0 |
应用指南 | |
|
Rohde & Schwarz RTO2000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Rohde & Schwarz RTO2000 Series
文献编号： 65W-61112-0 |
竞争 | |
|
Debugging CAN, LIN and FlexRay Automotive Buses with an Oscilloscope
Explains the physical layer basics of common automotive buses - CAN, LIN, and FlexRay - to enable you to troubleshoot bus problems or system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search …
文献编号： 55W-61098-3 |
应用指南 | |
|
Debugging SENT Automotive Buses with an Oscilloscope
The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult …
文献编号： 55W-61326-1 |
应用指南 | |
|
Automated Low Voltage Differential Signaling (LVDS) Measurements
Low Voltage Differential Signaling (LVDS) is a popular signaling system for applications requiring high speed data transfers using low power. This application note explains the basic elements of LVDS signaling, details measurements based on an …
文献编号： 48W-61639-0 |
应用指南 | |
|
Debugging SPMI Power Management Buses with an Oscilloscope
Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at …
文献编号： 48W-61436-0 |
应用指南 | |
|
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …
文献编号： 51W-60171-2 |
应用指南 | |
|
Innovation that drives innovation
|
成功案例 | |
|
Making Higher Accuracy Oscilloscope Measurements
12-bit analog-to-digital converters deliver higher resolution on the 4, 5 and 6 Series MSO oscilloscopes
Higher resolution oscilloscope measurements are becoming more important given today’s signal levels. Scopes are available with 12-bit analog-to …
|
技术简介 | |
|
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify. Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …
文献编号： 55W-61095-0 |
应用指南 | |
|
Probing Techniques for Accurate Voltage Measurements on Power Supplies with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is
written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and …
文献编号： 51W-60161-3 |
应用指南 | |
|
LeCroy HDO6000A/HDO8000A Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO6000A Series and HDO8000A Series
文献编号： 65W-61111-0 |
竞争 | |
|
LeCroy HDO9000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the LeCroy HDO9000 Series
文献编号： 65W-61110-0 |
竞争 | |
|
Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply …
文献编号： 48W-61452-0 |
技术简介 | |
|
Achieve Higher Vertical Resolution for More Precise Measurements
This white paper describes an approach in which new oscilloscope ADC technology, combined with digital signal processing and a low-noise front end; can provide even higher resolution than found in conventional high bit-rate ADC implementations.
|
白皮书 | |
|
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
Automotive Primer: In-Vehicle Networking
This primer provides an overview of the trends, challenges and solutions associated with the expected future evolution of in-vehicle networks, as well as a foundation for testing in-vehicle networks to …
文献编号： 48W-61611-0 |
入门手册 | |
|
Characterizing and Troubleshooting Jitter with Your Oscilloscope
Gives examples of jitter analysis, from basic analysis using frequency and Time Interval Error (TIE) measurements, to more advanced jitter decomposition techniques to help isolate the sources of jitter. Shows examples of jitter measurements using …
文献编号： 55Z-61099-1 |
应用指南 | |
|
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions. This application note:
Provides a quick review of practical inductor and transformer theory, especially related to power supply …
文献编号： 55W-61401-2 |
应用指南 | |
|
Control Loop Analysis Kit for Power Design Stability Measurements
This document describes how the Tektronix Control Loop Analysis Kit provides a simple test setup for validating and debugging feedback loop stability. This setup also enables engineers to test power supply rejection ratio (PSRR) on the regulator …
文献编号： 55W-61596-0 |
应用程序概述 | |
|
How to Troubleshoot System Problems Using an Oscilloscope with I2C and SPI Decoding
Learn about the physical layers of the most common interchip buses - I2C and SPI - to enable you to troubleshoot bus problems or system issues. Learn how to set up and interpret the results when you use automated decoding, triggering, and search on …
文献编号： 55W-61091-1 |
应用指南 | |
|
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces testing …
文献编号： 37W-23378-4 |
应用指南 | |
|
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies. This application note explains how to measure switching loss and conduction loss in power supply …
文献编号： 46W-60010-3 |
应用指南 | |
|
How to Use a Mixed Signal Oscilloscope to Test Digital Circuits
Learn how to set up a mixed signal oscilloscope and how use it in several applications including: triggering on pulse width violations, combining analog and digital waveforms to capture crosstalk, troubleshooting setup/hold violations, and checking …
文献编号： 3GT-24008-4 |
应用指南 | |
|
Measuring Digital Clock Stability and Jitter with an Oscilloscope
This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency …
文献编号： 48W-61379-1 |
应用指南 | |
|
Troubleshooting Analog to Digital Converter Offset Using a Mixed Signal Oscilloscope
This application note gives a procedure for performing quick checks on an Analog to Digital Converter (ADC) system gain, offset and linearity. The technique uses a ramp signal from a function generator to stimulate the system, including signal …
文献编号： 55W-61096-0 |
应用指南 | |
|
Power Supply Converter Design Procedures
This poster offers insight into power supply converter design procedures, test stages, challenges, and solutions.
文献编号： 48W-61607-0 |
海报 | |
|
Physical Layer Compliance Testing for 1000BASE-T Ethernet
Ethernet compliance testing requires precise test setups and evaluation against limits dictated by IEEE 802.3 standards. Automated testing software for oscilloscopes greatly simplifies and speeds testing. This application note summarizes key tests …
文献编号： 48W-61620-0 |
应用指南 | |
|
Keysight S-Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight S-Series
文献编号： 65W-61108-0 |
竞争 | |
|
Keysight X6000 Series vs. 5 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 5 Series MSO Mixed Signal Oscilloscope to those of the Keysight X6000 Series
文献编号： 65W-61109-0 |
竞争 | |
|
5 Series MSO - What's in the Box
|
速查资料 | |
|
How can I invert the channel on the 5 or 6 series MSO?
With firmware v1.16, the invert function is available in the channel menu.
If the unit has the older firmware v1.14 or below, the invert channel feature on the 5 or 6 series MSO is supported via the math channel instead.
Here is the setup …
|
常见问题 ID723956 | |
|
How can I tell if my 5 Series MSO is running on Windows?
There are three indicators to look for. A Windows scope will have the Applications menu at the top center of the screen and minimize/maximize/close buttons on the top right. In addition, if you tap at the bottom of the screen, the Windows Taskbar …
|
常见问题 ID474341 | |
|
How do I remotely control my 5 or 6 Series MSO from my computer, easily and without any programming?
For the standard instrument (without the Windows 10 option installed), you can simply connect your computer to the instrument through Ethernet and control the oscilloscope with your favorite browser.
Find the instrument’s IP address by selecting …
|
常见问题 ID474201 | |
|
How many digital channels are supported on the 5 and 6 Series MSO?
Each analog channel on the 5 and 6 Series MSO can be converted into 8 digital channels with the logic probe TLP058.
For a 4-channel model (MSO54, MSO64), it is up to 32 digital channels.
For a 6-channel model (MSO56), it is up to 48 digital channels …
|
常见问题 ID468121 | |
|
Could the number of analog channel be upgraded on the 5 series MSO?
No. The analog channel count is fixed at the initial purchase.
|
常见问题 ID468131 | |
|
How are 5 and 6 Series MSO setup files and session files different? How should I use them?
The 5 and 6 Series MSO setup files contain all instrument settings, user-configured analysis, and reference waveforms, so they provide an easy way to return the oscilloscope to a known state. For example, if you want to build a library of …
|
常见问题 ID235446 | |
|
How do I set up a network drive on my 4, 5, 6 Series MSO?
Introduction
Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs. This feature allows you to specify a directory on another computer for the scope to use as storage. To access this storage …
|
常见问题 ID773296 | |
|
What are some of the advantages of the 5 and 6 Series MSO digital trigger?
Since its invention by Tektronix in the 1940s, the oscilloscope’s trigger system has been a key component of the products, providing a stable display of repetitive signals and the capture of specific events in a signal. At the circuit level, the …
|
常见问题 ID467411 | |
|
Where are the controls for Roll Mode displays in my 5 and 6 Series MSO?
Roll Mode provides an instant display response when the oscilloscope is operating at very slow sweep speeds. Without it, the acquisition must complete before the display will update. With Horizontal Scale factors as slow as 1000 s/div, that can be a …
|
常见问题 ID235436 | |
|
How do I save and transfer a screenshot from the 4, 5 or 6 Series MSO oscilloscope to my PC via the remote command interface?
Screenshots (also known as hard copies) can be transferred from the Series 4, 5 and 6 MSO oscilloscopes via the remote programming interface using just a few simple commands. For information on how to send commands to the instrument via the remote …
|
常见问题 ID245436 | |
|
Where do I start learning about oscilloscopes and Tektronix offerings?
This document covers the basics of oscilloscopes including history and general operation, in this training presentation developed by a Tektronix Applications Engineer. Learn the XYZ's of Oscilloscopes »
|
常见问题 ID778971 | |
|
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
|
常见问题 ID471231 | |
|
What is the deskew range and resolution between channels for the 5 or 6 series MSO?
Both 5 and 6 series MSO support a deskew range of -125ns to +125ns.
The 6 series MSO can be adjusted in 1ps resolution for all acquisition modes except Peak Detect and Envelope (40ps resolution).
The 5 series MSO can be adjusted in 40ps resolution …
|
常见问题 ID723961 | |
|
My Tektronix oscilloscope uses the Linux operating system. Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
|
常见问题 ID64866 | |
|
How can I ungroup the channel badge on the 5/6 Series MSO?
On firmware v1.12 or above, the 5/6 Series MSO added the stacked and overlay mode mix and match feature. It allows user to group multiple channels for overlay mode for easy comparison.
To separate the channels in the group, there are couple options …
|
常见问题 ID773401 | |
|
I received the following message about my floating license:
(This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.)
Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out. After it reaches selected duration, it will automatically check …
|
常见问题 ID467516 | |
|
Where can I locate the save on trigger feature on the 5 series MSO?
It is in the “Acquisition” badge located in the lower right corner of the screen. It allows the user to set the configuration to save the waveform file or screen capture when there is a triggered event.
|
常见问题 ID474041 | |
|
What user interface differences should I expect to see between a standard 5 or 6 Series MSO and one equipped with the optional Windows 10 operating system?
When you purchase a 5 Series MSO with the 5-WIN option or a 6 Series MSO with the 6-WIN option installed, or upgrade your 5 Series MSO with the SUP5-WIN upgrade, or upgrade your 6 Series MSO with the SUP6-WIN upgrade, you will see very few …
|
常见问题 ID235441 | |
|
How can I try out optional features for my 5 Series MSO before I buy them?
Most field upgrades for the optional features for the 5 Series MSO are also available for a one-time, 30-day free trial. These are available simply by requesting a trial software license and installing the node-locked license in the instrument …
|
常见问题 ID235426 | |
|
I recently registered our Tektronix oscilloscope, updated the firmware and am currently trying to activate the free DVM & Frequency Counter. I don’t see any software downloads for activating the DVM. Am I doing something wrong, or looking in the wrong spot?
After you have registered your oscilloscope on Tek.com, you should have received an email with instructions. The email is sent to the address you used to login to tek.com. If you haven't received the email after registration:
Check your spam …
|
常见问题 ID468046 | |
|
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed.
On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen.
Along the left side of the screen you will see a marker …
|
常见问题 ID247211 | |
|
Does my 5 or 6 Series MSO support multiple displays?
Yes, the 5 and 6 Series MSO hardware supports a total of three displays, including the instrument’s internal display. The instrument provides DVI-D, Display Port, and VGA connectors on the rear panel.
The standard instrument (running the Linux …
|
常见问题 ID250721 | |
|
Is it possible to establish a peer to peer ethernet connection on the 5/6 Series MSO?
Yes. To setup a peer to peer connection, you must manually configure the IP and subnet mask address on both the scope and your computer. You can then use an ethernet cable connected directly between the scope and computer. This will work on the …
|
常见问题 ID474351 | |
|
What is the range of the logic threshold supported on the 5 and 6 Series MSO?
The logic threshold can be set between +/-40V with the TLP058 logic probe. Each individual digital channel can be set for its own threshold level.
|
常见问题 ID468126 | |
|
What does “Probe Dynamic Range” mean and how does the 5 and 6 Series MSO indicate it?
Oscilloscope probes which contain active circuitry, especially with amplifiers in the signal path, have a limited dynamic range over which the probe behaves linearly. When input signals exceed this range, the signal may be distorted. (Such probes …
|
常见问题 ID474196 | |
|
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications.
Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
|
常见问题 ID69266 | |
|
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft. Can my scope be updated?
No, but there is no need to. The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC).
Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
|
常见问题 ID780986 | |
|
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.
Prerequisites
1. PC equipped with Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
|
常见问题 ID474266 | |
|
I get an error message “CvP Tester Didn’t Run” on my 5 Series MSO.
Instruments that have both a Linux drive and a Windows drive should have the same firmware revision on both drives.
When only one drive has the latest firmware installed, the instrument user may find that firmware is not updated on the Linux drive …
|
常见问题 ID771991 | |
|
Can I mount a network drive on my standard (non-Windows) 5 or 6 Series MSO? How could I use this capability?
The oscilloscope has a built-in m.2 drive, labeled C:. This drive can be used to store waveforms, setups, and measurement results. However, this drive is not easily accessible to your computer.
The oscilloscope also has several USB ports to support …
|
常见问题 ID474191 | |
|
Can multiple auto measurements be removed at once on the 5 series MSO?
No. Currently, the user interface does not allow to remove all auto measurements at once. The closest workaround will be recalling the default setup.
|
常见问题 ID474036 | |
|
Where can I find the positive/negative pulse count auto measurement on the 5/6 Series MSO?
Currently, there is no auto measurement for the positive or negative pulse count on the 5/6 Series MSO.
The workaround would be using the “Search” feature to search for the pulse width.
First, set up for the positive pulse width auto …
|
常见问题 ID773396 | |
|
Where can I locate the visual trigger setup on the 5 or 6 series MSO?
The visual trigger option is not listed in the trigger type selection initially. To setup the visual trigger, simply click on the "DRAW A BOX" icon (located in the lower right corner of the display) to draw the areas for the visual trigger. After …
|
常见问题 ID723951 | |
|
: Can the optional AFG in the MDO3000, MDO4000C and 5 Series MSO be set to sweep?
AFG in MDO3000, MDO4000C, and 5 Series MSO do not have sweep function. But a limited sweep may be created using the arbitrary function.
Example: Create a sweep from 100 KHz to 250 KHz.
ArbExpress (free software on Tek.com) select Equation Editor …
|
常见问题 ID474056 | |
|
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update
By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates. To ensure Windows 10 receives all available …
|
常见问题 ID782296 | |
|
Is e*scope supported on the 5 or 6 series MSO with Windows 10 installed?
Yes. With firmware v1.8 or above, using the web browser access to the Windows 10 version is supported along with TightVNC. TightVNC must be installed on both the remote PC and the scope. For the detailed setup instructions, please see the 5/6 …
|
常见问题 ID474031 | |
|
How do I switch between stacked and overlay display modes on the MSO5 Series?
Double click anywhere in the waveform view screen. A wave form menu will appear. Under display mode you can pick between overlay or stacked modes.
|
常见问题 ID474261 | |
|
Is BUS trigger mode supported in the AB sequence trigger mode on the 5 series MSO?
Yes. However, it does not apply to both events. It could be only either A or B event for the bus trigger. The second event is locked to edge trigger type.
|
常见问题 ID474026 | |
|
What probe interface does my oscilloscope have?
Oscilloscope series
Probe interface
CSA7000/CSA7000B
TekConnect
DPO2000
TekVPI
DPO3000
…
|
常见问题 ID64251 | |
|
How do I upgrade the bandwidth of my 5 Series MSO and what do I get with the upgrade?
Bandwidth upgrades to 500 MHz and 1 GHz can be accomplished by ordering an upgrade product and entering a new software license into the instrument. The instrument bandwidth appears in the Help-> About menu near the top of the window, between the …
|
常见问题 ID235431 | |
|
After I place an order for a software-license or an upgrade for my 5 or 6 Series MSO, how do I get and install the software license or the upgrade license?
After you place an order for the software license or an upgrade for your 5 or 6 Series MSO, you will receive an email (at the email address in your MyTek account). It will look about like this, but customized for you:
Dear Customer …
|
常见问题 ID235451 | |
|
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607). You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
|
常见问题 ID782291 | |
|
I saw a warning message when recalling an instrument setup on my 5 or 6 Series MSO. What caused it?
The 5 and 6 Series MSO will display a pop-up warning message when it is not completely successful recalling the saved state of the instrument with a setup or session file.
The following message will appear on the display:
WARNING
The oscilloscope …
|
常见问题 ID235416 | |
|
What optional features are available as upgrades for my 5 Series MSO and how do I get the upgrade?
Most optional, factory-installed features for the 5 Series MSO are also available as field upgrades, and are installed simply by ordering an upgrade product and entering a new, node-locked software license into the instrument.
There are several …
|
常见问题 ID235421 |