下载
下载
下载手册、产品技术资料、软件等：
联系我们
联系我们
与泰克代表实时聊天。 工作时间：上午 6:00 - 下午 4:30（太平洋标准时间）。
AFG3000C 任意波形/函数发生器
如今的设计通常非常复杂，在测试中需要多种激励信号。AFG3000C 系列任意波形/函数发生器具有 12 种标准波形、任意波形功能和信号损伤选项，一台设备可支持多种应用需要。同类最佳性能保证信号得到准确复现。AFG3000C 系列任意波形/函数发生器具有大显示器和 25 个快捷键，简单易学，使用方便。 查看更多信号发生器 »
了解泰克新型 AFG31000 如何通过 9 英寸触摸显示屏、内置波形创建工具、实时波形监视工具等设备简化测试。
特点 |
优势 |
| 双通道型号 | 将两台信号发生器换成一台，并且能够提供两路严格同步或完全独立的信号，节省成本和工作台上空间。 |
| 高达 1 GS/s 采样速率 | 以精细的时基分辨率生成波形。 |
| 最高 20 V p-p 幅度，50 Ω 负载 (AFG3011) | 创建高幅度信号且不需要外部功率放大器，节省成本和设置时间。 |
| 25 个快捷键 | 通过直接访问常用功能和参数，缩短设置和评估时间。 |
| 超大 5.6" (142 mm) 彩色显示器 | 所有相关设置和波形图形可一目了然，让您对信号完全放心。 |
| 深度仅 6.6" (168 mm) | 节省宝贵的工作台空间。 |
| ArbExpress™ 软件 | 方便地创建和修改波形 - 从泰克示波器中无缝导入波形，或者通过公式编辑器、徒手绘制、点绘制或波形数据创建波形。 |
| 型号 | 模拟通道 | 输出频率 | 记录长度 | 采样率 | 垂直分辨率 | 报价 |
|---|---|---|---|---|---|---|
| AFG3021C | 1 | 25 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $2,520 配置和报价 |
| AFG3051C | 1 | 50 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $2,790 配置和报价 |
| AFG3022C | 2 | 25 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $3,780 配置和报价 |
| AFG3052C | 2 | 50 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $4,230 配置和报价 |
| AFG3011C | 1 | 10 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $4,680 配置和报价 |
| AFG3101C | 1 | 100 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $4,790 配置和报价 |
| AFG3151C | 1 | 150 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $5,820 配置和报价 |
| AFG3102C | 2 | 100 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $6,780 配置和报价 |
| AFG3152C | 2 | 150 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $8,300 配置和报价 |
价格：价格如有变更，恕不另行通知。
| 型号 | 模拟通道 | 输出频率 | 记录长度 | 采样率 | 垂直分辨率 | 报价 |
|---|---|---|---|---|---|---|
| AFG3021C | 1 | 25 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $2,520 配置和报价 |
| AFG3051C | 1 | 50 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $2,790 配置和报价 |
| AFG3022C | 2 | 25 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $3,780 配置和报价 |
| AFG3052C | 2 | 50 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $4,230 配置和报价 |
| AFG3011C | 1 | 10 MHz | 128k 点 | 2 - 128k：250 MS/s | 14 位 | US $4,680 配置和报价 |
| AFG3101C | 1 | 100 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $4,790 配置和报价 |
| AFG3151C | 1 | 150 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $5,820 配置和报价 |
| AFG3102C | 2 | 100 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $6,780 配置和报价 |
| AFG3152C | 2 | 150 MHz | 128k 点 | 2 - 16k：1 GS/s；>16k - 128k：250 MS/s | 14 位 | US $8,300 配置和报价 |
价格：价格如有变更，恕不另行通知。
银牌保障（延长保修）
| 产品技术资料 | 方案 | 说明 | 在线订购或了解更多 |
|---|---|---|---|
| 查看规格书 | R5 |
银牌保障维修服务 - 5 年（包括保修） |
了解详情 |
| 查看规格书 | SILV200 或 SILV400 （取决于产品） |
银牌保障维修服务 - 5 年（包括保修） |
了解详情 |
附件
011004902
产品技术资料
描述
视图 产品技术资料
终端器，BNC；同轴，2W，BNC 公头到母头馈通终端 50 欧姆
附件
012048200
产品技术资料
描述
视图 产品技术资料
电缆组件，RF；同轴；RFD，50 欧，(175-1455-00)，36 寸 L, BNC 插头至 BNC 插头，应力释放靴
附件
159045400
产品技术资料
描述
视图 产品技术资料
保险丝，引线：3 支装，0.125A，125V，快速熔断，安全控制，R251.125，LITTELFUSE，引脚加工
附件
RM3100
产品技术资料
描述
视图 产品技术资料
机架安装套件
| 产品技术资料 | 附件 | 描述 |
|---|---|---|
| 011004902 | 终端器，BNC；同轴，2W，BNC 公头到母头馈通终端 50 欧姆 | |
| 012048200 | 电缆组件，RF；同轴；RFD，50 欧，(175-1455-00)，36 寸 L, BNC 插头至 BNC 插头，应力释放靴 | |
| 159045400 | 保险丝，引线：3 支装，0.125A，125V，快速熔断，安全控制，R251.125，LITTELFUSE，引脚加工 | |
| RM3100 | 机架安装套件 |
|
AFG3000C 任意波形/函数发生器产品技术资料
文献编号： 75C-28281-7 |
Datasheet | |
|
AFG3000C 系列
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333801 |
用户 | |
|
AFG3000 系列 快速入门用户手册
本手册介绍 AFG3000 系列任意波形函数发生器的安装和操作方法。 部件号： 077096301 |
主要用户 | |
|
AFG3000 系列 快速入门用户手册
任意波形函数发生器
Quick Start User Manual
本手册介绍 AFG3000 系列任意波形函数发生器的安装和操作方法。 部件号： 077096300 |
主要用户 | |
|
AFG3000C Series
Arbitary Function Generators
Technical Reference
This document describes specifications and performance verification procedures for the AFG3000 Series function generators. 部件号： 077069100 |
性能验证 | |
|
AFG3000 Series
Arbitrary/Function Generators
Quick Start User Manual
本手册介绍 Tektronix AFG3000 系列任意波形/ 函数发生器的安装和操作以及基本操作和概念。 部件号： 071163506 |
主要用户 | |
|
AFG3000 系列 快速入门用户手册
任意波形/函数发生器
部件号： 071163505 |
用户 | |
|
AFG3000 系列快速入门用户手册
任意波形/函数发生器
Quick Start User Manual
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071163504 |
用户 | |
|
Tektronix Supplemental Product Information Sheet
People’s Republic of China
Other
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071218501 |
用户 | |
|
CSharp NI-VISA Send Waveform to AFG3000_使用CSharp向AFG3000发送数据
本例程提供了基本使用C#对AFG产品的进行控制，发送任意波形数据。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
CSharp NI-VISA Send Waveform to MDO AFG_使用CSharp发送数据MDO内置AFG
本例程提供了基本使用C#对MDO内置AFG进行控制，发送数据到MDO的AFG中，实现数据回放。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
AFG3000 Matlab Load and Output 2 Separate Waveforms_使用Matlab调用AFG外部波形并发送
演示了如何用Matlab调用AFG外部波形并发送。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
AFG3000 MATLAB ICT Send Waveform _使用Matlab写入AFG3000的波形
Use the table view of the samples on the instrument to verify the individual samples.使用Matlab对AFG3000进行波形数据的写入。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
USB-TX - DPO-DSA-MSO70000-C-D - Win7, V5.0.1
The USB-TX Automated Test Software is a Windows based application that runs on Tektronix Windows7 based instruments such as DPO/DSA70000/70000C/D MSO 70000/70000C Series oscilloscopes.
Option USB-TX provides an automated, simple, and efficient way …
部件号： 066155402 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-C-D - Win7, V5.0.0
The USB-TX Automated Test Software is a Windows based application that runs on Tektronix Windows7 based instruments such as DPO/DSA 70000/70000C/D MSO 70000/70000C Series oscilloscopes.
TekExpress software (TEKEXP) ordered with option USB-TX …
部件号： 066155400 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-B-C - Win XP - Win7 V4.1.0
The USB-TX Automated Test Software is a Windows based application that runs on any Windows XP computer operating system including Tektronix Windows based instruments such as DPO/DSA/MSO 70000/70000B/70000C Series oscilloscopes.
TekExpress software …
部件号： 066111412 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-B-C - Win XP - Win7 V4.0.4
The USB-TX Automated Test Software is a Windows based application that runs on any Windows XP computer operating system including Tektronix Windows based instruments such as DPO/DSA/MSO 70000/70000B/70000C Series oscilloscopes.
TekExpress software …
部件号： 066111411 |
应用 | |
|
为任意波形发生器增加价值
摘要: 在历史上，人们一直使用多种专用信号源生成各种波形，提供来自没有上市的或很难获得的元器件的信号。这要求购买和维护单独的专用信号源，甚至要求为某个项目定制设计或修改信号源。随着数字取样技术和数字串行处理技术的出现，可以只通过一部信号源仪器-- 任意波形发生器，生成要求的几乎任何类型的信号。新的任意波形发生器使得电子设计工程师能够通过提供了高信号频率、高保真度信号复现能力和稳定时钟的通用信号源，满足模拟和嵌入式处理器应用的需求。
文献编号： 76C-19737-0 |
白皮书 | |
|
使用任意波形 函数发生器复现真实世界信号
这篇应用文章将给您关于泰克AFG3000系列以及ArbExpress应用软件的详细的步骤演示
文献编号： 76W-18661-2 |
应用指南 | |
|
泰克AFG3000C系列与力科WaveStation系列比较
泰克AFG3000C系列与LeCroy WaveStation系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28110-1 |
竞争 | |
|
泰克AFG3000C系列与Rigol DG4000系列比较
泰克AFG3000C系列与Rigol DG4000系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28624-0 |
竞争 | |
|
泰克AFG3000C系列与Rigol DG5000系列比较
泰克AFG3000C系列与Rigol DG5000系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28623-0 |
竞争 | |
|
泰克AFG3000C系列与Agilent 33500B系列比较
泰克AFG3000C系列与Agilent 33500B系列比较，提供主要性能指标，脉冲生成，缩短设置、评估时间等对照比较。
文献编号： 75W-27620-1 |
竞争 | |
|
泰克AFG3000C系列与Tabor Wonder Wave 257xA系列比较
泰克AFG3000C系列与Tabor Wonder Wave 257xA系列比较
文献编号： 75W-22671-2 |
竞争 | |
|
任意波形函数发生器为AMFM无线电测试和校正提供通用方便的解决方案
本应用指南中使用的具体仪器是泰克AFG3252。它有 两个独立输出，支持的正弦波频率范围高达240 MHz。 AFG3252 包括所有常用的预置函数发生器波形及许多 其它波形。此外，其存储器支持用户自定义的任意形状 的波形。仪器还提供内置频率扫描和其它功能，简化了 无线电测试和调试任务。
文献编号： 75W-20333-0 |
应用指南 | |
|
任意波形/ 函数发生器在RF 应用中提供通用激励源
根据设计规范测试RF元件和电路通常要求用仿真的输入信号代替没有的元器件，或分析设备在不同信号条件下的特点。多年以来，对CW频率高于100 MHz的CW信号和调制信号，RF发生器一直是首选的工具。最近，在最新仪器技术的推动下，现代任意波形/ 函数发生器(AFG)的通用性、灵活性和频率范围都得到了明显改进，其在许多RF 测试应用中的使用量正不断提高。
文献编号： 75W-21197-0 |
应用指南 | |
|
使用任意波形 函数发生器复现真实世界信号
这篇应用文章将给您关于泰克AFG3000系列以及ArbExpress应用软件的详细的步骤演示
文献编号： 76C-18661-0 |
应用指南 | |
|
使用任意波形/ 函数发生器可以完成的25 种常见测试应用
AFG 提供了独特的优势：它生成标准形状的稳定波形，如正弦波、方波、脉冲波、三角波、等等。此 外，它允许用户利用自己定义的形状，生成所谓的任意波形。而且AFG 提供了一种方式，可以调制来 自内部信号源或外部信号源的信号，生成扫频或输出信号突发。
文献编号： 75W-23806-0 |
速查资料 | |
|
在第一次使用USB把AFG3000连接到计算机上时，它要求我安装一个驱动程序。我该怎么办呢?
某些老版本的TekVISA没有签名的驱程，因此必须手动安装驱程。最新版TekVISA不再存在这个问题。如果看到一条信息，要求您指向一个文件夹，安装USB驱程，那么应下载和安装最新版TekVISA 这里。
|
常见问题 ID66121 | |
|
AFG信号发生器的加载格式是什么
AFG加载波形的格式，加载任意波形*.tfw，加载波形和对应设置*.tfs
|
常见问题 ID473246 | |
|
如何使用 TekVISA 向我的仪器发送命令？
TekVISA 下载链接：
/node/69201
为与示波器进行通信并控制示波器，可以使用 OpenChoice Talker-Listener。返回“应用程序和实用工具”面板，单击OpenChoice Talker Listener，然后单击”启动应用程序或实用工具”。系统会弹出一个新窗口，您将在此窗口中看到 4 个不同的面板：“仪器”，选择您想要与之通信的仪器；“输入命令或脚本”，输入编程命令并将其发送到仪器的字段 …
|
常见问题 ID69181 | |
|
泰克AFG3000任意波形函数发生器如何使用ARB软件编辑波形并导入AFG3000？
使用arbexpress生成一个基本波形
选择需要的基础波形类型，如正玄波、方波、直流等。
选择当前的仪器型号，如AFG3052C/ AWG7122B等
设定参数
预览波形，按OK后生成
函数绘制波形
选定正确的型号后，输入公式（主要是设定range 和 函数），支持分段编辑
按OK后生成所编辑的波形
手工绘制波形
选择画笔，直接画出理想波形
保存波形
选择需要的格式: tfw 为波形格式，用于AFG3000 …
|
常见问题 ID474126 | |
|
怎样才能设置两部AFG3000系列产品输出4条通道?
对准最多四条通道相位的设置假设：从Factory Default开始设置，进行相位处理的所有通道的频率相同。1.把主AFG的Trigger Output连接到从AFG的Trigger Input上。2.把主AFG的External Ref Output连接到从AFG的External Ref Input上。3.把从AFG设为使用外部参考输入: Utilities / System / Clock Ref to external。4.把从AFG和主AFG的通道1和通道2设为Burst。5 …
|
常见问题 ID66021 | |
|
TekVISA是什么？我如何使用它来与我的仪器进行通信并控制仪器？
VISA 是 Virtual Instrument Software Architecture（虚拟仪器软件体系结构）的缩写形式。简言之，VISA 可处理您的计算机操作系统与仪器之间的通信。
您可能已熟悉 TekVISA。TekVISA 是泰克自己的 VISA 品牌。安捷伦和 National Instruments 也有自己的 VISA。每个 VISA 中包含通信驱动程序、USBTMC 驱动程序（USB 测试和测量类驱动程序）、VISA 软件库和文档、仪器连接管理器 …
|
常见问题 ID69176 | |
|
如何使用仪器的程序员手册？
TekVISA 下载链接： TEKVISA CONNECTIVITY SOFTWARE
您好，欢迎使用泰克产品，今天我将介绍包含 3 个部分 TekVISA 使用指南系列的最后一个部分。我将概述程序员手册，以及如何使用它们来找到使用编程命令的正确方法。
每台示波器都附带一本程序员手册，其中包含所有可用于以编程方式控制仪器的命令。可在我们的网站 www.tek.com 上找到程序员手册。为了查找适用于我一直在使用的 MDO4104-6 的手册，我将进入我们的网站，然后在搜索栏中输入 …
|
常见问题 ID69186 | |
|
如何下载并安装 NI LabVIEW SignalExpress Tektronix Edition 的 30 天试用版？
注意：泰克不再提供 NI LabVIEW SignalExpress Tektronix Edition。此常见问题部分“仅限用于历史记录”。
National Instruments SignalExpressTektronix Edition 是一款测量自动化工具，允许 SignalExpress 控制泰克示波器、函数发生器、数字万用表或频率计数器并进行连续自动测量。
要使用 SignalExpress，必须先下载试用版，然后在购买 SignalExpress …
|
常见问题 ID66221 | |
|
Arbitrary/Function Generator AFG3000 Series (replaced by AFG3000C)
文献编号： 76W-18656-5 |
Datasheet | |
|
AFG3000C and AFG3000 Series Arbitrary Function Generators Specifications and Performance Verification Technical Reference
Arbitary Function Generators Specifications and Performance Verification
This document describes specifications and performance verification procedures for the AFG3000 Series Arbitrary Function Generators. 部件号： 077069103 |
性能验证 | |
|
AFG3000C and AFG3000 Series Arbitrary Function Generators Specifications and Performance Verification Technical Reference
This manual provides instructions to verify the performance of the AFG3000Cand AFG3000 Series Arbitrary Function Generators to the module level.
This manual provides instructions to verify the performance of the AFG3000Cand AFG3000 Series Arbitrary Function Generators to the module level. 部件号： 077069103 |
性能验证 | |
|
AFG3000 Series Arbitrary Function Generators Quick Start User Manual
This manual describes the installation and operation of Tektronix AFG3000 Series Arbitrary Function Generators along with basic operations and concepts.
This manual describes the installation and operation of Tektronix AFG3000 Series Arbitrary Function Generators along with basic operations and concepts. 部件号： 077095702 |
用户 | |
|
ArbExpress AXW100
Waveform Creation and Editing Tool for Tektronix AWG/AFG Printable Version 3.4
This online help provides information on how to create, edit, and transfer standard waveforms to an Arbitrary Waveform Generator, an Arbitrary Function Generator, or an oscilloscope. 部件号： 077000013 |
联机帮助 | |
|
ArbExpress AXW100
This online help provides information on how to create, edit, and transfer standard waveforms to an Arbitrary Waveform Generator, an Arbitrary Function Generator, or an oscilloscope. 部件号： 077000012 |
联机帮助 | |
|
AFG3000 Series
This document helps customers with data security concerns to sanitize or remove memory devices from the AFG3000 Series Arbitrary Function Generators. 部件号： 077081401 |
解密 | |
|
AFG3000C Series
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333101 |
用户 | |
|
RM3100
These instructions contain information about installing the AFG3000 and AFG3000C Series instruments into a RM3100 rackmount. 部件号： 075108800 |
现场安装说明 | |
|
AFG3000 Series
Arbitary Function Generators
Programmer Manual
This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling the AFG3000 Series Arbitrary Function Generators. 部件号： 077074301 |
程序员 | |
|
AFG3000C Series
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333100 |
用户 | |
|
AFG3000 Series
Arbitary Function Generators Specifications and Performance Verification
Technical Reference
This document describes specifications and performance verification procedures for the AFG3000 Series Arbitrary Function Generators. 部件号： 077069101 |
性能验证 | |
|
AFG3000C Series
Arbitary Function Generators Compliance and Safety
Instructions
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. Information is provided in English, French, German, Italian, Spanish, Portuguese, Korean, Japanese, Simplified Chinese, Traditional Chinese, and Russian. 部件号： 071324400 |
用户 | |
|
AFG3000 Series
Arbitary Function Generators
Programmer Manual
This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling the AFG3000 Series Arbitrary Function Generators. 部件号： 077074300 |
程序员 | |
|
AFG3000 Series
Arbitrary Function Generators Declassification and Security
Instructions
This document helps customers with data security concerns to sanitize or remove memory devices from the AFG3000 Series Arbitrary Function Generators. 部件号： 077081400 |
解密 | |
|
AFG3000 Series Service Manual
Arbitrary/Function Generator
Service Manual
This document supports the AFG3021 and AFG3022 instruments and provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 部件号： 071164002 |
维修 | |
|
AFG3000 Series
Arbitrary/Function Generators
Programmer Manual
This document describes commands that can be used to remotely control the product. 部件号： 071163904 |
程序员 | |
|
AFG3000 Series
Arbitary/Function Generators
Quick Start User Manual
This document describes product operation and/or installation procedures. It may also provide information about features and functions, accessories, applications and troubleshooting. 部件号： 071163106 |
主要用户 | |
|
AFG3000 Series
Arbitrary/Function Generator
Release Notes
This Release Notes provide information about specification change. The product firmware version must be 3.1.0 or above. 部件号： 061435100 |
发布说明 | |
|
AFG3000 Series
Arbitrary/Function Generators
This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 部件号： 071164005 |
维修 | |
|
AFG3000
Memory Erasure and Memory Parts List Instructions
This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair. 部件号： 071185600 |
解密 | |
|
AFG3000 Series Quick Start User Manual
Arbitrary/Function Generator
Quick Start User Manual
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071163103 |
用户 | |
|
RM3100 Instructions
Rackmount Kit
Instructions
This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation. 部件号： 071175801 |
现场安装说明 | |
|
AFG3000 Series Instructions
040-1719-00 & 045-0291-00 Grounding Post Extender
Instructions
This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation. 部件号： 075092302 |
现场安装说明 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.5
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146105 |
应用 | |
|
AFG3000 Series Firmware Update - V3.2.4
The AFG3000 Series Firmware Update - V3.2.4 includes all features from previous versions and optimizes output signal in phase modulation mode.
部件号： 066072814 |
固件 | |
|
AFG3000C Series Firmware Update - V1.0.10
Latest Firmware for AFG3011C/AFG3021C/ AFG3022C/AFG3051C/AFG3052C/AFG3101C/AFG3102C/AFG3151C/ AFG3152C/AFG3251C/AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066186101 |
固件 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.4
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146104 |
应用 | |
|
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.6
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …
部件号： 066155409 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155503 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155502 |
应用 | |
|
AFG3000C SERIES FIRMWARE UPDATE
Latest Firmware for AFG3011C/AFG3021C / AFG3022C/AFG3051C/AFG3052C / AFG3101C / AFG3102C / AFG3251C / AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066145501 |
固件 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.1
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146103 |
应用 | |
|
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.2
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …
部件号： 066155406 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155501 |
应用 | |
|
Open Source package that is used in AFG3KC
AFG3KC project uses some open source package. These packages are compliance with GPL or LGPL license. Modifications have been taken for some packages and some packages do not been changed. All open source packages will be uploaded to website.
部件号： 066155600 |
固件 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.0.107
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155500 |
应用 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V2.9
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146101 |
更新 | |
|
AFG3000C SERIES FIRMWARE UPDATE
Latest Firmware for AFG3011C/AFG3021C / AFG3022C/AFG3051C/AFG3052C / AFG3101C / AFG3102C / AFG3251C / AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066145500 |
固件 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066146200 |
应用 | |
|
AFG3000 Series Firmware Update V3.2.3
Includes all features from previous versions and optimize output signal in phase modulation mode
部件号： 066072813 |
固件 | |
|
VISACMD - Command line Utility for instrument communication
VISACMD.EXE is a command-line utility that will read/write instrument commands to/from stdout (the console) and then exit. This allows command-line scripting (batch files) handle things like event processing, looping, waits, and file IO. It offers …
部件号： 066123900 |
辅助功能 | |
|
ARBEXPRESS v2.5 WAVEFORM CREATION AND EDITING SW v2.5
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066055107 |
应用 | |
|
AFG3000 SERIES FIRMWARE UPDATE v3.1.1
Includes all features from previous versions and an offset output related bug fix.
部件号： 066072810 |
固件 | |
|
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …
部件号： 066077003 |
应用 | |
|
AFG3000 ETHERNET WAVEFORM SETUP
Ethernet Return Loss waveforms for the AFG3000 Series arbitrary function generators. These AFG3000 series waveform setup files can be used for Ethernet Return Loss testing. Requirement: an AFG3252 arbitrary function generator. See more signal …
部件号： 1000000313 |
波形 | |
|
Tektronix generator has high-amplitude output stage
|
产品文章 | |
|
Tektronix Announces First Network-Based Lab Instrument Management Solution for Education
New TekSmartLab™ Improves the Teaching and Learning Experience for Instructors and Students Alike, Centralizes Management of up to 400 Instruments, Allows Students to Retrieve Test Results with Smartphones BEAVERTON, Ore., March 31, 2015 - Tektronix …
|
新闻稿 | |
|
Testing with Versatile Pulse Generation Solutions
This application note describes several applications in which modern general-purpose arbitrary/function generators (AFGs) can present a flexible, versatile and more affordable alternative solution to dedicated pulse generators.
文献编号： 75W-21097-0 |
应用指南 | |
|
Waveform Generators Fill a Void
|
产品文章 | |
|
Tek spins scope-like 3-in-1 function generators
|
产品文章 | |
|
AFG3000 Product Demo
|
产品文章 | |
|
Arb/Function Generators Set Price/Performance Benchmark
|
产品文章 | |
|
Arbitrary/function generator provides high signal amplitude
|
产品文章 | |
|
Arbitrary/function generator combines three products into one
|
产品文章 | |
|
Arbitrary/Function Generator Offers Higher Performance with Lower Price
|
产品文章 | |
|
Arbitrary/Function Generators Promote Ease-of-Use
|
产品文章 | |
|
Arbitrary+ Function Generator Offers Three in One
|
产品文章 | |
|
Capacitance and Inductance Measurements Using an Oscilloscope and a Function Generator
Most labs have an ample supply of DMM's for measuring DC resistance, but when
it comes to measuring inductance, capacitance and impedance, it is not always
easy to find an LCR meter.
LCR meters operate …
文献编号： 75W-28152-0 |
应用指南 | |
|
Analog ASIC fuels waveform generator
|
产品文章 | |
|
If I set my amplitude on my AFG3000 series generator+ the actual amplitude as measured by my scope or meter is double the voltage that I have set on the generator. Why does this happen?
The AFG3000 series instruments will output some amount of voltage, specified in V p-p into a 50 ohm load, which is a properly terminated configuration. This also results in the best system performance. The output circuit has a 50 ohm series …
|
常见问题 ID60871 | |
|
What are the differences between the AFG302x models and new AFG302xB models?
The differences are:AFG3021 andAFG3022New AFG3021B andAFG3022B USB interface only GPIB, USB, LAN interfaces 4 x 64K waveform memory 4 x 128K waveform memory
|
常见问题 ID61101 | |
|
Can I save the AFG3000 display to a graphic file?
Yes. As of firmware version 3.0.0 the AFG3000 series instruments now have the functionality to save the display to a graphic file.ProcedureAt any time during operation, with a USB memory device attached, press and hold the right-arrow digit selection …
|
常见问题 ID56406 | |
|
What Is The Difference Between The AFG3000's TFS And TFW Files?
TFSThis is the setup file for the instrument. It contains information such as function, run mode, amplitude, and offset. It does not contain information such as sample data or GPIB setup. All the instrument attributes affected by recalling a default …
|
常见问题 ID60076 | |
|
Why can’t I recall my arbitrary waveform file on the AFG3000 from my USB Stick?
Recalling your waveform on the AFG3000 isn’t in the Save/Recall menu. Instead, you need to go into the Edit menu, select “Read From…”, and press the top bezel button to switch from internal memory toUSB memory. You will now be able to see your …
|
常见问题 ID64351 | |
|
Does the AC power supply of the AFG3000 Series automatically sense voltage?
Yes. The power supply of the AFG3000 Series accepts any voltage between 100 and 240 V, 47 to 63 Hz.
|
常见问题 ID56481 | |
|
Do the signal outputs of the AFG3000 have a short circuit protection?
There is no need for a dedicated short-circuit protection because the output circuits are immune from a short circuit of the output. However, the outputs can be protected against over-voltage from an external source with a fuse that is included as a …
|
常见问题 ID56461 | |
|
Can I synchronize the phase of both signal outputs of a dual-channel AFG3000?
Yes. Simply press the Phase/Delay button and select Align Phase. If you are in Pulse mode, the button is called "Recover LeadDelay".
|
常见问题 ID56421 | |
|
Does The AFG3000 Series Support Raw Socket Connections?
No, raw socket connections are unavailable in the AFG3000 series.The AFG3000 series only uses the VXI-11 TCP/IP Instrument Protocol Specification for Ethernet connectivity.Additional InformationDocumentation on the VXI protocol
|
常见问题 ID59306 | |
|
What are the differences between AFG3000B series and AFG3000C series?
There at two differences.
1. The AFG3000C models the display was changed to TFT LCD which has a better viewing angle and brighter display.
2. And two new models were added. AFG3051C and AFG3052C.
|
常见问题 ID468371 | |
|
How do I obtain the parts to update my AFG3000 unit for the safety issue?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.The parts are included in the upgrade kit that Tektronix will send to you. If you have not received …
|
常见问题 ID63591 | |
|
What is the advantage of floating outputs on the AFG3000?
Floating outputs help avoid the effect of ground loops and allow users to reference the output signal to voltage levels other than ground. The maximum rated voltage between chassis ground and common ground is 42 Vp-p (DC +peak AC).
|
常见问题 ID56921 | |
|
I would like to synchronize two or more AFG’s in order to get multiple channels of output.
This is the best method to minimize the delay between the instruments, and eliminate drift with respect to each other.
Physical setup:
The AFG’s will be controlled by a single separate trigger source, with cables that are of equal length to …
|
常见问题 ID63731 | |
|
If I have questions about the AFG3000 Safety Notification+ whom can I contact?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.You can call (1) your local Tektronix sales office or service center, (2) e-mail Tektronix, or (3) in …
|
常见问题 ID63741 | |
|
Can I send my AFG3000 with the safety issue to Tektronix to have it fixed+ or can Tektronix update my unit here on site?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.This is not necessary. If your unit is affected, you should install the upgrade kit that Tektronix …
|
常见问题 ID63246 | |
|
How do I save and recall setup files on my AFG3000?
To save and recall setup files on a AFG3000 go into the SAVE menu button and select internal or USB memory. For recalling go into the RECALL menu button and select internal or USB memory.
|
常见问题 ID64711 | |
|
Does Tektronix have PC based Software which will allow me to generate+ manage+ and load waveforms into an ARB?
Yes, ArbExpress will allow you to perform these functions. It allows you to generate basic and advanced waveforms. You may also define equations to describe the waveform. These may then be downloaded into the Arb through its communication link.
Here …
|
常见问题 ID58181 | |
|
What are the difference in the AFG1022 and AFG3022C?
1. AFG1022 channel 2 is a continues signal only no modulation, burst, or sweep. AFG3022C has full function on both channels.
2. AFG1022 Phasing of channel 1 and 2 is only available on for Sine wave below 1 MHz. AFG3022C has phase control on any …
|
常见问题 ID468361 | |
|
How do I transfer a scope waveform to the AFG3000?
There are a couple of ways to transfer a waveform from the scope to AFG3000.
From a PC running ArbExpress you connect directly to the scope and AFG3000 via communication port.The following scope models are supported TDS1000,TDS2000, TDS3000 …
|
常见问题 ID63636 | |
|
Can I phase synchronize the signal outputs of two or more AFG3000 instruments?
Yes. Waveforms from two or more generators can be synchronized by operating one AFG310x, AFG302xB, AFG3011, or AFG325x as "Master Unit" and any of the AFG3000 Series instruments as "Slave Units." In this configuration, the master's Reference Clock …
|
常见问题 ID56401 | |
|
Will the AFG and AWG products work with worldwide AC power outlets?
The AFG and AWG products have a modular AC power cord, much like the ones used on PCs. This allows you to simply change the whole power cord to accommodate a change in the local AC outlet/plug standard.Note: AFG310 and AFG320 have line select …
|
常见问题 ID57996 | |
|
What is this safety issue concerning the AFG3000 Series?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.Tektronix has determined that certain improper use of the AFG3000 Series instruments may potentially …
|
常见问题 ID64226 | |
|
How can I set up 2 AFG3000 series products to output 4 channels?
Setup to allow phase alignment of up to four channelsAssumption: Setup will start from Factory Default and the frequency of all channels to be phased are the same.1.Connect MasterAFG Trigger Output to Slave AFG Trigger Input2.Connect MasterAFG …
|
常见问题 ID56511 | |
|
Why do the files saved on my AFG3000 series generator have a January 01+ 1980 timestamp on all the files that I save?
The arbitrary/function generator does not have an internal real time clock. If you create a file using the Edit menu of the instrument, the date and time information is displayed like “TEKAFG001.TFW JAN 01 00:00 1980”.
|
常见问题 ID57051 | |
|
Is there a front cover available for the AFG3000 series?
There is no front cover available for the AFG3000.
|
常见问题 ID56751 | |
|
What communication ports are available on the AFG3000 series?
The number and type of communication ports available vary with the model of AFG3000.AFG3021 and AFG3022 have a USB (B) port standard. This port is located on the rear panel. There is no option to add other types of ports AFG3011, AFG3021B, AFG3022B …
|
常见问题 ID57686 | |
|
Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?
Adding noise in the AFG 3000 uses a power splitter to add the noise to the signal. When you are at the highest amplitude levels of your AFG 3000, it must reduce the amplitude of the signal, in order to be able to add noise. It will halve the …
|
常见问题 ID56266 | |
|
How do I determine if my AFG3000 Series instrument is subject to the safety concern?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.Only AFG3000 Series instruments with serial numbers that begin with C01 are affected. Instruments …
|
常见问题 ID63536 | |
|
Are user manuals for the AFG3000 offered in my language?”
The instrument is available with a user manual in any of the following languages; English, French, German, Italian, Japanese, Korean, Spanish, Traditional Chinese, Simplified Chinese, and Russian. Please specify the desired language at the time of …
|
常见问题 ID56351 | |
|
Is local-language support is provided by the AFG3000 user interface?
The AFG3000 ships with a multilingual user interface pre-installed. The user can choose from any of the following languages for user menus and help text: English, French, German, Traditional Chinese, Simplified Chinese, Korean, Japanese, or Russian …
|
常见问题 ID56731 | |
|
Where do I download or find HDMI Direct Synthesis AWG Patterns?
The pattern files for HDMI Direct Synthesis (DS) AWG pattern files are distributed on three DVDs when you order option HT3-DS for your oscilloscope. You will need to download TDSHT3 software onto your oscilloscope and install the new key code that …
|
常见问题 ID64801 | |
|
What is the minimum waveform size that I can output from my AFG or AWG product?
AFG310/320 10 points AFG3000 series 10 points AWG400 series 64 points AWG510/520 256 points AWG610 512 points AWG615/710/710B 960 points AWG7000 series 1 point (960 points for hardware sequencing) AWG5000 series 2 points
|
常见问题 ID56956 | |
|
What is the difference between “Trigger out” and “Sync out”?
Trigger and Sync Out are almost the same. They are only different in the burst mode, in inifinte-cycle mode.Figure 1: Trigger out modeScope CH1 ->AFGCH1Scope CH2 ->AFGTrigger outScope CH3 ->AFGTrigger in(with T connector)In this case a Trigger out …
|
常见问题 ID56091 | |
|
What is the maximum waveform size that I can output from my AFG or AWG product?
AFG 310/320 16,000 points AFG 3000/B series 131,384 points (except AFG3021 and AFG3022) AFG3021, AFG3022 65,536 points AWG400 series 8,200,000 points (std) or 16,200,000 points (opt. 01) AWG510/520 4,194,048 points AWG610 8,100,032 points …
|
常见问题 ID56951 | |
|
What is the timebase accuracy of the AFG or AWG products?
AFG310/320 50 ppm (25 °C) during 1 year after calibration AFG3000 series 1 ppm (25 °C) during 1 year after calibration AWG400 series 1 ppm (25 °C) during 1 year after calibration AWG510/520 1 ppm (25 °C) during 1 year after calibration …
|
常见问题 ID56981 | |
|
What is DDS on the AFG3000?
Direct digital synthesis (DDS) is a common technique for generating signals. The desired waveform is stored digitally in waveform memory as a series of amplitude points. A digital-to-analog converter (DAC) converts the data into a series of voltage …
|
常见问题 ID56911 | |
|
Can the AFG3000s be configured with differential outputs?
Yes. This can be accomplished with dual-channel instruments by connecting the load between the outputs of channels 1 and 2. For this application, both channels are programmed with identical waveforms, and one of the channel outputs is inverted via …
|
常见问题 ID56431 | |
|
How can I set up 2 AFG3000 series products to output simulated 3 phase power?
Setup for AFG3000 3 Phase 60 Hz Power Simulation1. Connect MasterAFG Trigger Output to Slave AFG Trigger Input2. Connect MasterAFG External Ref Output to SlaveAFG External Ref Input3. Run the Master 3Ph 60Hz.TFS (from zip file below) on MasterAFG …
|
常见问题 ID56396 | |
|
Can I select a different waveform and output frequency for each channel on a dual-channel AFG3000 series?
DDS allows output frequency and waveform to be selected completely independently for each channel.
See more arbitrary function generators »
|
常见问题 ID56411 | |
|
Do the AFG/AWG products have user selectable filters available?
There are user selectable filters available in the following instruments.AFG310/320 No user selectable filters.AFG3000 series No user selectable filters.AWG400 series 1 1 MHz, 5 MHz, 20 MHz, 50 MHz selectable filters.AWG510/520 1,2 20 MHz, 50 MHz …
|
常见问题 ID57211 | |
|
What type of signal connections do I have on my AFG or AWG product?
Product Analog MarkersAFG300 series BNC NoneAFG3000 series BNC BNCAWG410, AWG420, AWG430 BNC BNCAWG510, AWG520 BNC SMAAWG610, AWG615 SMA SMAAWG710, AWG710B SMA SMAAWG7000 series SMA SMAAWG5000 series BNC BNC
|
常见问题 ID57911 | |
|
The AFG3000 recognizes the USB memory stick but does not see the files. Why?
A possibility is that the memory stick is incorrectly formatted. The format needs to be Fat32, Windows format. Other formats such as NTFS will not work.Also the AFG3000 will not show files which do not have the correct extension. i.e. .tfw (trace …
|
常见问题 ID56816 | |
|
Is there any information available that covers the basic principals behind Arbitrary Waveform Generators?
The document XYZs of Signal Generators covers basic AWG and AFG theory as well as a few real world applications.
|
常见问题 ID62791 | |
|
Is the specified waveform memory size in bytes+ words+ or long words of memory and how do I relate that to the number of points in my waveform?
The AFG and AWG memory size is specified in waveform points, so if the memory is listed as 16,000 or 32,400,000, for example, then you can fit 16,000 or 32,400,000 waveform points in a single waveform file.
|
常见问题 ID57481 | |
|
AFG3000: Output Load selection+ does it change the AFG output impedance?
No, it does not, the output impedance of the AFG3000 series is always 50 ohms.The three selections allow the output Amplitude to be calculated correctly based on the DUT load. i.e. (setting at 50 ohms) With a 50 ohm source and a Hi-Z load the output …
|
常见问题 ID55166 | |
|
How do I update the firmware on my AFG3000?
Go to www.tektronix.com and search for your model AFG and select by software. You will want to find the latest firmware file and download it to a USB flash drive. Then insert into the front of the AFG and start by selecting the 'Utility' menu button …
|
常见问题 ID64716 | |
|
How many output channels and markers do I have on an AFG or AWG product?
AFG/AWG Channels Markers/Channel AFG 310 1 0 AFG 320 1 0 AFG 3xx1 1 0 AFG 3xx2 2 0 AWG410 1 2 AWG420 2 2 AWG430 3 2 AWG510 1 2 AWG520 2 2 AWG610 1 2 AWG615 1 2 AWG710 1 2 AWG710B 1 2 AWG7051 1 2 AWG7052 2 2 AWG7101 1 2 AWG7102 2 2 AWG5002 2 2 …
|
常见问题 ID57386 | |
|
How do I save my arbitrary waveform file on the AFG3000 to my USB Stick?
Saving your waveform on the AFG 3000 isn’t in the Save/Recall menu. Instead, you need to go into the Edit menu, press “More” and select “Write To…”, and press the top bezel button to switch from internal memory to USB memory. You will now be able to …
|
常见问题 ID63616 | |
|
Can I store more than four arbitrary waveforms on the AFG3000?
Yes. You can save many more arbitrary waveforms on a USB memory device that plugs into the convenient USB port on the instrument’s front panel. You can also connect the instrument to a PC and use the free ArbExpress™ version 2.0 software included …
|
常见问题 ID56416 | |
|
When I use more than one channel in my AFG3000 series does the number of waveform points available to each channel change?
No. Memory is not shared between channels. The specified maximum number of points is the same on all channels.
|
常见问题 ID61381 | |
|
Can I operate the AFG3000 with a mouse+ e.g.+ to create arbitrary waveforms
The AFG3000 Series cannot be operated via mouse or touch screen, but offers convenient shortcut front-panel keys, numeric keypad, rotary knob, and on-screen bezel menus. Arbitrary waveforms can be created and edited conveniently from a Windows™ …
|
常见问题 ID56391 | |
|
What does the AFG3000 calibration function do?
The calibration function in the utility menul calibrates DC offset and Amplitude. This function is used for preventive maintenance.Further details are described in Service Manual.
|
常见问题 ID56031 | |
|
What is the maximum voltage that I can get out of my AFG or AWG product?
The voltages listed below are all only true if the generator is driving into a 50 ohm termination. AFG 300 series 10 V p-p Maximum into a 50 ohm load AFG 3011 20 V p-p Maximum into a 50 ohm load AFG 302x series 10 V p-p Maximum into a 50 ohm load …
|
常见问题 ID57806 | |
|
How do I determine if my AFG3000 Series instrument has already been modified for the safety issue?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.For AFG3000 Series instruments with serial numbers that begin with C01, if the grounding post on the …
|
常见问题 ID63531 | |
|
AFG3000: How low a duty cycle can I set on the AFG3000 series?
With the latest FW you are able to set duty cycles as low as 0.001%. If you need a lower duty cycle then follow these steps. Press Pulse Press Burst Select 1-Cycle Set a pulse period equal the pulse width plus the rise and fall time shown or set by …
|
常见问题 ID53771 | |
|
Can I connect an oscilloscope to the AFG3000 signal generator to transfer waveforms directly?
The AFG3000 series does not have a direct connection which allows you to transfer a waveform directly from a scope to the AFG. Waveform transfer is supported via ArbExpress, which allows users to easily import waveforms from any Tektronix …
|
常见问题 ID56381 | |
|
Can the AFG3000 series generators produce true random noise+ or just pseudo random noise?
The AFG3000 series can only produce pseudo-random noise. It does not have a true analog noise source. The AWG400 series and AWG500 series generators have analog random noise sources built in, providing a true random noise source.
|
常见问题 ID63276 | |
|
How do I create a differential signal on the AFG3000 signal generators?
You will need to use both single ended channels on a two-channel instrument. You will create the positive side on Channel 1, and create its compliment on Channel 2.Note: This method is ineffective while in Run Mode: Modulation or Run Mode: Sweep.
|
常见问题 ID60701 |
|
AFG3000C 任意波形/函数发生器产品技术资料
文献编号： 75C-28281-7 |
Datasheet | |
|
AFG3000C 系列
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333801 |
用户 | |
|
AFG3000 系列 快速入门用户手册
本手册介绍 AFG3000 系列任意波形函数发生器的安装和操作方法。 部件号： 077096301 |
主要用户 | |
|
AFG3000 系列 快速入门用户手册
任意波形函数发生器
Quick Start User Manual
本手册介绍 AFG3000 系列任意波形函数发生器的安装和操作方法。 部件号： 077096300 |
主要用户 | |
|
AFG3000C Series
Arbitary Function Generators
Technical Reference
This document describes specifications and performance verification procedures for the AFG3000 Series function generators. 部件号： 077069100 |
性能验证 | |
|
AFG3000 Series
Arbitrary/Function Generators
Quick Start User Manual
本手册介绍 Tektronix AFG3000 系列任意波形/ 函数发生器的安装和操作以及基本操作和概念。 部件号： 071163506 |
主要用户 | |
|
AFG3000 系列 快速入门用户手册
任意波形/函数发生器
部件号： 071163505 |
用户 | |
|
AFG3000 系列快速入门用户手册
任意波形/函数发生器
Quick Start User Manual
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071163504 |
用户 | |
|
Tektronix Supplemental Product Information Sheet
People’s Republic of China
Other
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071218501 |
用户 | |
|
CSharp NI-VISA Send Waveform to AFG3000_使用CSharp向AFG3000发送数据
本例程提供了基本使用C#对AFG产品的进行控制，发送任意波形数据。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
CSharp NI-VISA Send Waveform to MDO AFG_使用CSharp发送数据MDO内置AFG
本例程提供了基本使用C#对MDO内置AFG进行控制，发送数据到MDO的AFG中，实现数据回放。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
AFG3000 Matlab Load and Output 2 Separate Waveforms_使用Matlab调用AFG外部波形并发送
演示了如何用Matlab调用AFG外部波形并发送。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
AFG3000 MATLAB ICT Send Waveform _使用Matlab写入AFG3000的波形
Use the table view of the samples on the instrument to verify the individual samples.使用Matlab对AFG3000进行波形数据的写入。
请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。
|
编码采样 | |
|
USB-TX - DPO-DSA-MSO70000-C-D - Win7, V5.0.1
The USB-TX Automated Test Software is a Windows based application that runs on Tektronix Windows7 based instruments such as DPO/DSA70000/70000C/D MSO 70000/70000C Series oscilloscopes.
Option USB-TX provides an automated, simple, and efficient way …
部件号： 066155402 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-C-D - Win7, V5.0.0
The USB-TX Automated Test Software is a Windows based application that runs on Tektronix Windows7 based instruments such as DPO/DSA 70000/70000C/D MSO 70000/70000C Series oscilloscopes.
TekExpress software (TEKEXP) ordered with option USB-TX …
部件号： 066155400 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-B-C - Win XP - Win7 V4.1.0
The USB-TX Automated Test Software is a Windows based application that runs on any Windows XP computer operating system including Tektronix Windows based instruments such as DPO/DSA/MSO 70000/70000B/70000C Series oscilloscopes.
TekExpress software …
部件号： 066111412 |
应用 | |
|
USB-TX - DPO-DSA-MSO70000-B-C - Win XP - Win7 V4.0.4
The USB-TX Automated Test Software is a Windows based application that runs on any Windows XP computer operating system including Tektronix Windows based instruments such as DPO/DSA/MSO 70000/70000B/70000C Series oscilloscopes.
TekExpress software …
部件号： 066111411 |
应用 | |
|
为任意波形发生器增加价值
摘要: 在历史上，人们一直使用多种专用信号源生成各种波形，提供来自没有上市的或很难获得的元器件的信号。这要求购买和维护单独的专用信号源，甚至要求为某个项目定制设计或修改信号源。随着数字取样技术和数字串行处理技术的出现，可以只通过一部信号源仪器-- 任意波形发生器，生成要求的几乎任何类型的信号。新的任意波形发生器使得电子设计工程师能够通过提供了高信号频率、高保真度信号复现能力和稳定时钟的通用信号源，满足模拟和嵌入式处理器应用的需求。
文献编号： 76C-19737-0 |
白皮书 | |
|
使用任意波形 函数发生器复现真实世界信号
这篇应用文章将给您关于泰克AFG3000系列以及ArbExpress应用软件的详细的步骤演示
文献编号： 76W-18661-2 |
应用指南 | |
|
泰克AFG3000C系列与力科WaveStation系列比较
泰克AFG3000C系列与LeCroy WaveStation系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28110-1 |
竞争 | |
|
泰克AFG3000C系列与Rigol DG4000系列比较
泰克AFG3000C系列与Rigol DG4000系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28624-0 |
竞争 | |
|
泰克AFG3000C系列与Rigol DG5000系列比较
泰克AFG3000C系列与Rigol DG5000系列比较，提供主要性能指标，缩短设置、评估时间，任意波形频率，脉冲频率，方法频率等对照比较。
文献编号： 75W-28623-0 |
竞争 | |
|
泰克AFG3000C系列与Agilent 33500B系列比较
泰克AFG3000C系列与Agilent 33500B系列比较，提供主要性能指标，脉冲生成，缩短设置、评估时间等对照比较。
文献编号： 75W-27620-1 |
竞争 | |
|
泰克AFG3000C系列与Tabor Wonder Wave 257xA系列比较
泰克AFG3000C系列与Tabor Wonder Wave 257xA系列比较
文献编号： 75W-22671-2 |
竞争 | |
|
任意波形函数发生器为AMFM无线电测试和校正提供通用方便的解决方案
本应用指南中使用的具体仪器是泰克AFG3252。它有 两个独立输出，支持的正弦波频率范围高达240 MHz。 AFG3252 包括所有常用的预置函数发生器波形及许多 其它波形。此外，其存储器支持用户自定义的任意形状 的波形。仪器还提供内置频率扫描和其它功能，简化了 无线电测试和调试任务。
文献编号： 75W-20333-0 |
应用指南 | |
|
任意波形/ 函数发生器在RF 应用中提供通用激励源
根据设计规范测试RF元件和电路通常要求用仿真的输入信号代替没有的元器件，或分析设备在不同信号条件下的特点。多年以来，对CW频率高于100 MHz的CW信号和调制信号，RF发生器一直是首选的工具。最近，在最新仪器技术的推动下，现代任意波形/ 函数发生器(AFG)的通用性、灵活性和频率范围都得到了明显改进，其在许多RF 测试应用中的使用量正不断提高。
文献编号： 75W-21197-0 |
应用指南 | |
|
使用任意波形 函数发生器复现真实世界信号
这篇应用文章将给您关于泰克AFG3000系列以及ArbExpress应用软件的详细的步骤演示
文献编号： 76C-18661-0 |
应用指南 | |
|
使用任意波形/ 函数发生器可以完成的25 种常见测试应用
AFG 提供了独特的优势：它生成标准形状的稳定波形，如正弦波、方波、脉冲波、三角波、等等。此 外，它允许用户利用自己定义的形状，生成所谓的任意波形。而且AFG 提供了一种方式，可以调制来 自内部信号源或外部信号源的信号，生成扫频或输出信号突发。
文献编号： 75W-23806-0 |
速查资料 | |
|
在第一次使用USB把AFG3000连接到计算机上时，它要求我安装一个驱动程序。我该怎么办呢?
某些老版本的TekVISA没有签名的驱程，因此必须手动安装驱程。最新版TekVISA不再存在这个问题。如果看到一条信息，要求您指向一个文件夹，安装USB驱程，那么应下载和安装最新版TekVISA 这里。
|
常见问题 ID66121 | |
|
AFG信号发生器的加载格式是什么
AFG加载波形的格式，加载任意波形*.tfw，加载波形和对应设置*.tfs
|
常见问题 ID473246 | |
|
如何使用 TekVISA 向我的仪器发送命令？
TekVISA 下载链接：
/node/69201
为与示波器进行通信并控制示波器，可以使用 OpenChoice Talker-Listener。返回“应用程序和实用工具”面板，单击OpenChoice Talker Listener，然后单击”启动应用程序或实用工具”。系统会弹出一个新窗口，您将在此窗口中看到 4 个不同的面板：“仪器”，选择您想要与之通信的仪器；“输入命令或脚本”，输入编程命令并将其发送到仪器的字段 …
|
常见问题 ID69181 | |
|
泰克AFG3000任意波形函数发生器如何使用ARB软件编辑波形并导入AFG3000？
使用arbexpress生成一个基本波形
选择需要的基础波形类型，如正玄波、方波、直流等。
选择当前的仪器型号，如AFG3052C/ AWG7122B等
设定参数
预览波形，按OK后生成
函数绘制波形
选定正确的型号后，输入公式（主要是设定range 和 函数），支持分段编辑
按OK后生成所编辑的波形
手工绘制波形
选择画笔，直接画出理想波形
保存波形
选择需要的格式: tfw 为波形格式，用于AFG3000 …
|
常见问题 ID474126 | |
|
怎样才能设置两部AFG3000系列产品输出4条通道?
对准最多四条通道相位的设置假设：从Factory Default开始设置，进行相位处理的所有通道的频率相同。1.把主AFG的Trigger Output连接到从AFG的Trigger Input上。2.把主AFG的External Ref Output连接到从AFG的External Ref Input上。3.把从AFG设为使用外部参考输入: Utilities / System / Clock Ref to external。4.把从AFG和主AFG的通道1和通道2设为Burst。5 …
|
常见问题 ID66021 | |
|
TekVISA是什么？我如何使用它来与我的仪器进行通信并控制仪器？
VISA 是 Virtual Instrument Software Architecture（虚拟仪器软件体系结构）的缩写形式。简言之，VISA 可处理您的计算机操作系统与仪器之间的通信。
您可能已熟悉 TekVISA。TekVISA 是泰克自己的 VISA 品牌。安捷伦和 National Instruments 也有自己的 VISA。每个 VISA 中包含通信驱动程序、USBTMC 驱动程序（USB 测试和测量类驱动程序）、VISA 软件库和文档、仪器连接管理器 …
|
常见问题 ID69176 | |
|
如何使用仪器的程序员手册？
TekVISA 下载链接： TEKVISA CONNECTIVITY SOFTWARE
您好，欢迎使用泰克产品，今天我将介绍包含 3 个部分 TekVISA 使用指南系列的最后一个部分。我将概述程序员手册，以及如何使用它们来找到使用编程命令的正确方法。
每台示波器都附带一本程序员手册，其中包含所有可用于以编程方式控制仪器的命令。可在我们的网站 www.tek.com 上找到程序员手册。为了查找适用于我一直在使用的 MDO4104-6 的手册，我将进入我们的网站，然后在搜索栏中输入 …
|
常见问题 ID69186 | |
|
如何下载并安装 NI LabVIEW SignalExpress Tektronix Edition 的 30 天试用版？
注意：泰克不再提供 NI LabVIEW SignalExpress Tektronix Edition。此常见问题部分“仅限用于历史记录”。
National Instruments SignalExpressTektronix Edition 是一款测量自动化工具，允许 SignalExpress 控制泰克示波器、函数发生器、数字万用表或频率计数器并进行连续自动测量。
要使用 SignalExpress，必须先下载试用版，然后在购买 SignalExpress …
|
常见问题 ID66221 | |
|
Arbitrary/Function Generator AFG3000 Series (replaced by AFG3000C)
文献编号： 76W-18656-5 |
Datasheet | |
|
AFG3000C and AFG3000 Series Arbitrary Function Generators Specifications and Performance Verification Technical Reference
Arbitary Function Generators Specifications and Performance Verification
This document describes specifications and performance verification procedures for the AFG3000 Series Arbitrary Function Generators. 部件号： 077069103 |
性能验证 | |
|
AFG3000C and AFG3000 Series Arbitrary Function Generators Specifications and Performance Verification Technical Reference
This manual provides instructions to verify the performance of the AFG3000Cand AFG3000 Series Arbitrary Function Generators to the module level.
This manual provides instructions to verify the performance of the AFG3000Cand AFG3000 Series Arbitrary Function Generators to the module level. 部件号： 077069103 |
性能验证 | |
|
AFG3000 Series Arbitrary Function Generators Quick Start User Manual
This manual describes the installation and operation of Tektronix AFG3000 Series Arbitrary Function Generators along with basic operations and concepts.
This manual describes the installation and operation of Tektronix AFG3000 Series Arbitrary Function Generators along with basic operations and concepts. 部件号： 077095702 |
用户 | |
|
ArbExpress AXW100
Waveform Creation and Editing Tool for Tektronix AWG/AFG Printable Version 3.4
This online help provides information on how to create, edit, and transfer standard waveforms to an Arbitrary Waveform Generator, an Arbitrary Function Generator, or an oscilloscope. 部件号： 077000013 |
联机帮助 | |
|
ArbExpress AXW100
This online help provides information on how to create, edit, and transfer standard waveforms to an Arbitrary Waveform Generator, an Arbitrary Function Generator, or an oscilloscope. 部件号： 077000012 |
联机帮助 | |
|
AFG3000 Series
This document helps customers with data security concerns to sanitize or remove memory devices from the AFG3000 Series Arbitrary Function Generators. 部件号： 077081401 |
解密 | |
|
AFG3000C Series
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333101 |
用户 | |
|
RM3100
These instructions contain information about installing the AFG3000 and AFG3000C Series instruments into a RM3100 rackmount. 部件号： 075108800 |
现场安装说明 | |
|
AFG3000 Series
Arbitary Function Generators
Programmer Manual
This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling the AFG3000 Series Arbitrary Function Generators. 部件号： 077074301 |
程序员 | |
|
AFG3000C Series
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. 部件号： 071333100 |
用户 | |
|
AFG3000 Series
Arbitary Function Generators Specifications and Performance Verification
Technical Reference
This document describes specifications and performance verification procedures for the AFG3000 Series Arbitrary Function Generators. 部件号： 077069101 |
性能验证 | |
|
AFG3000C Series
Arbitary Function Generators Compliance and Safety
Instructions
This document contains compliance and safety information for the AFG3000C Arbitrary Function Generators. Information is provided in English, French, German, Italian, Spanish, Portuguese, Korean, Japanese, Simplified Chinese, Traditional Chinese, and Russian. 部件号： 071324400 |
用户 | |
|
AFG3000 Series
Arbitary Function Generators
Programmer Manual
This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling the AFG3000 Series Arbitrary Function Generators. 部件号： 077074300 |
程序员 | |
|
AFG3000 Series
Arbitrary Function Generators Declassification and Security
Instructions
This document helps customers with data security concerns to sanitize or remove memory devices from the AFG3000 Series Arbitrary Function Generators. 部件号： 077081400 |
解密 | |
|
AFG3000 Series Service Manual
Arbitrary/Function Generator
Service Manual
This document supports the AFG3021 and AFG3022 instruments and provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 部件号： 071164002 |
维修 | |
|
AFG3000 Series
Arbitrary/Function Generators
Programmer Manual
This document describes commands that can be used to remotely control the product. 部件号： 071163904 |
程序员 | |
|
AFG3000 Series
Arbitary/Function Generators
Quick Start User Manual
This document describes product operation and/or installation procedures. It may also provide information about features and functions, accessories, applications and troubleshooting. 部件号： 071163106 |
主要用户 | |
|
AFG3000 Series
Arbitrary/Function Generator
Release Notes
This Release Notes provide information about specification change. The product firmware version must be 3.1.0 or above. 部件号： 061435100 |
发布说明 | |
|
AFG3000 Series
Arbitrary/Function Generators
This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts. 部件号： 071164005 |
维修 | |
|
AFG3000
Memory Erasure and Memory Parts List Instructions
This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair. 部件号： 071185600 |
解密 | |
|
AFG3000 Series Quick Start User Manual
Arbitrary/Function Generator
Quick Start User Manual
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. 部件号： 071163103 |
用户 | |
|
RM3100 Instructions
Rackmount Kit
Instructions
This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation. 部件号： 071175801 |
现场安装说明 | |
|
AFG3000 Series Instructions
040-1719-00 & 045-0291-00 Grounding Post Extender
Instructions
This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation. 部件号： 075092302 |
现场安装说明 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.5
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146105 |
应用 | |
|
AFG3000 Series Firmware Update - V3.2.4
The AFG3000 Series Firmware Update - V3.2.4 includes all features from previous versions and optimizes output signal in phase modulation mode.
部件号： 066072814 |
固件 | |
|
AFG3000C Series Firmware Update - V1.0.10
Latest Firmware for AFG3011C/AFG3021C/ AFG3022C/AFG3051C/AFG3052C/AFG3101C/AFG3102C/AFG3151C/ AFG3152C/AFG3251C/AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066186101 |
固件 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.4
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146104 |
应用 | |
|
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.6
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …
部件号： 066155409 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155503 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155502 |
应用 | |
|
AFG3000C SERIES FIRMWARE UPDATE
Latest Firmware for AFG3011C/AFG3021C / AFG3022C/AFG3051C/AFG3052C / AFG3101C / AFG3102C / AFG3251C / AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066145501 |
固件 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V3.1
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146103 |
应用 | |
|
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.2
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …
部件号： 066155406 |
应用 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155501 |
应用 | |
|
Open Source package that is used in AFG3KC
AFG3KC project uses some open source package. These packages are compliance with GPL or LGPL license. Modifications have been taken for some packages and some packages do not been changed. All open source packages will be uploaded to website.
部件号： 066155600 |
固件 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.0.107
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066155500 |
应用 | |
|
ARBEXPRESS WAVEFORM CREATION AND EDITING SW, V2.9
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066146101 |
更新 | |
|
AFG3000C SERIES FIRMWARE UPDATE
Latest Firmware for AFG3011C/AFG3021C / AFG3022C/AFG3051C/AFG3052C / AFG3101C / AFG3102C / AFG3251C / AFG3252C arbitrary/function generator. Please follow the installation instructions carefully. Please read the Release Notes for additional …
部件号： 066145500 |
固件 | |
|
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.
TekExpress Automation software …
部件号： 066146200 |
应用 | |
|
AFG3000 Series Firmware Update V3.2.3
Includes all features from previous versions and optimize output signal in phase modulation mode
部件号： 066072813 |
固件 | |
|
VISACMD - Command line Utility for instrument communication
VISACMD.EXE is a command-line utility that will read/write instrument commands to/from stdout (the console) and then exit. This allows command-line scripting (batch files) handle things like event processing, looping, waits, and file IO. It offers …
部件号： 066123900 |
辅助功能 | |
|
ARBEXPRESS v2.5 WAVEFORM CREATION AND EDITING SW v2.5
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and …
部件号： 066055107 |
应用 | |
|
AFG3000 SERIES FIRMWARE UPDATE v3.1.1
Includes all features from previous versions and an offset output related bug fix.
部件号： 066072810 |
固件 | |
|
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …
部件号： 066077003 |
应用 | |
|
AFG3000 ETHERNET WAVEFORM SETUP
Ethernet Return Loss waveforms for the AFG3000 Series arbitrary function generators. These AFG3000 series waveform setup files can be used for Ethernet Return Loss testing. Requirement: an AFG3252 arbitrary function generator. See more signal …
部件号： 1000000313 |
波形 | |
|
Tektronix generator has high-amplitude output stage
|
产品文章 | |
|
Tektronix Announces First Network-Based Lab Instrument Management Solution for Education
New TekSmartLab™ Improves the Teaching and Learning Experience for Instructors and Students Alike, Centralizes Management of up to 400 Instruments, Allows Students to Retrieve Test Results with Smartphones BEAVERTON, Ore., March 31, 2015 - Tektronix …
|
新闻稿 | |
|
Testing with Versatile Pulse Generation Solutions
This application note describes several applications in which modern general-purpose arbitrary/function generators (AFGs) can present a flexible, versatile and more affordable alternative solution to dedicated pulse generators.
文献编号： 75W-21097-0 |
应用指南 | |
|
Waveform Generators Fill a Void
|
产品文章 | |
|
Tek spins scope-like 3-in-1 function generators
|
产品文章 | |
|
AFG3000 Product Demo
|
产品文章 | |
|
Arb/Function Generators Set Price/Performance Benchmark
|
产品文章 | |
|
Arbitrary/function generator provides high signal amplitude
|
产品文章 | |
|
Arbitrary/function generator combines three products into one
|
产品文章 | |
|
Arbitrary/Function Generator Offers Higher Performance with Lower Price
|
产品文章 | |
|
Arbitrary/Function Generators Promote Ease-of-Use
|
产品文章 | |
|
Arbitrary+ Function Generator Offers Three in One
|
产品文章 | |
|
Capacitance and Inductance Measurements Using an Oscilloscope and a Function Generator
Most labs have an ample supply of DMM's for measuring DC resistance, but when
it comes to measuring inductance, capacitance and impedance, it is not always
easy to find an LCR meter.
LCR meters operate …
文献编号： 75W-28152-0 |
应用指南 | |
|
Analog ASIC fuels waveform generator
|
产品文章 | |
|
If I set my amplitude on my AFG3000 series generator+ the actual amplitude as measured by my scope or meter is double the voltage that I have set on the generator. Why does this happen?
The AFG3000 series instruments will output some amount of voltage, specified in V p-p into a 50 ohm load, which is a properly terminated configuration. This also results in the best system performance. The output circuit has a 50 ohm series …
|
常见问题 ID60871 | |
|
What are the differences between the AFG302x models and new AFG302xB models?
The differences are:AFG3021 andAFG3022New AFG3021B andAFG3022B USB interface only GPIB, USB, LAN interfaces 4 x 64K waveform memory 4 x 128K waveform memory
|
常见问题 ID61101 | |
|
Can I save the AFG3000 display to a graphic file?
Yes. As of firmware version 3.0.0 the AFG3000 series instruments now have the functionality to save the display to a graphic file.ProcedureAt any time during operation, with a USB memory device attached, press and hold the right-arrow digit selection …
|
常见问题 ID56406 | |
|
What Is The Difference Between The AFG3000's TFS And TFW Files?
TFSThis is the setup file for the instrument. It contains information such as function, run mode, amplitude, and offset. It does not contain information such as sample data or GPIB setup. All the instrument attributes affected by recalling a default …
|
常见问题 ID60076 | |
|
Why can’t I recall my arbitrary waveform file on the AFG3000 from my USB Stick?
Recalling your waveform on the AFG3000 isn’t in the Save/Recall menu. Instead, you need to go into the Edit menu, select “Read From…”, and press the top bezel button to switch from internal memory toUSB memory. You will now be able to see your …
|
常见问题 ID64351 | |
|
Does the AC power supply of the AFG3000 Series automatically sense voltage?
Yes. The power supply of the AFG3000 Series accepts any voltage between 100 and 240 V, 47 to 63 Hz.
|
常见问题 ID56481 | |
|
Do the signal outputs of the AFG3000 have a short circuit protection?
There is no need for a dedicated short-circuit protection because the output circuits are immune from a short circuit of the output. However, the outputs can be protected against over-voltage from an external source with a fuse that is included as a …
|
常见问题 ID56461 | |
|
Can I synchronize the phase of both signal outputs of a dual-channel AFG3000?
Yes. Simply press the Phase/Delay button and select Align Phase. If you are in Pulse mode, the button is called "Recover LeadDelay".
|
常见问题 ID56421 | |
|
Does The AFG3000 Series Support Raw Socket Connections?
No, raw socket connections are unavailable in the AFG3000 series.The AFG3000 series only uses the VXI-11 TCP/IP Instrument Protocol Specification for Ethernet connectivity.Additional InformationDocumentation on the VXI protocol
|
常见问题 ID59306 | |
|
What are the differences between AFG3000B series and AFG3000C series?
There at two differences.
1. The AFG3000C models the display was changed to TFT LCD which has a better viewing angle and brighter display.
2. And two new models were added. AFG3051C and AFG3052C.
|
常见问题 ID468371 | |
|
How do I obtain the parts to update my AFG3000 unit for the safety issue?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.The parts are included in the upgrade kit that Tektronix will send to you. If you have not received …
|
常见问题 ID63591 | |
|
What is the advantage of floating outputs on the AFG3000?
Floating outputs help avoid the effect of ground loops and allow users to reference the output signal to voltage levels other than ground. The maximum rated voltage between chassis ground and common ground is 42 Vp-p (DC +peak AC).
|
常见问题 ID56921 | |
|
I would like to synchronize two or more AFG’s in order to get multiple channels of output.
This is the best method to minimize the delay between the instruments, and eliminate drift with respect to each other.
Physical setup:
The AFG’s will be controlled by a single separate trigger source, with cables that are of equal length to …
|
常见问题 ID63731 | |
|
If I have questions about the AFG3000 Safety Notification+ whom can I contact?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.You can call (1) your local Tektronix sales office or service center, (2) e-mail Tektronix, or (3) in …
|
常见问题 ID63741 | |
|
Can I send my AFG3000 with the safety issue to Tektronix to have it fixed+ or can Tektronix update my unit here on site?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.This is not necessary. If your unit is affected, you should install the upgrade kit that Tektronix …
|
常见问题 ID63246 | |
|
How do I save and recall setup files on my AFG3000?
To save and recall setup files on a AFG3000 go into the SAVE menu button and select internal or USB memory. For recalling go into the RECALL menu button and select internal or USB memory.
|
常见问题 ID64711 | |
|
Does Tektronix have PC based Software which will allow me to generate+ manage+ and load waveforms into an ARB?
Yes, ArbExpress will allow you to perform these functions. It allows you to generate basic and advanced waveforms. You may also define equations to describe the waveform. These may then be downloaded into the Arb through its communication link.
Here …
|
常见问题 ID58181 | |
|
What are the difference in the AFG1022 and AFG3022C?
1. AFG1022 channel 2 is a continues signal only no modulation, burst, or sweep. AFG3022C has full function on both channels.
2. AFG1022 Phasing of channel 1 and 2 is only available on for Sine wave below 1 MHz. AFG3022C has phase control on any …
|
常见问题 ID468361 | |
|
How do I transfer a scope waveform to the AFG3000?
There are a couple of ways to transfer a waveform from the scope to AFG3000.
From a PC running ArbExpress you connect directly to the scope and AFG3000 via communication port.The following scope models are supported TDS1000,TDS2000, TDS3000 …
|
常见问题 ID63636 | |
|
Can I phase synchronize the signal outputs of two or more AFG3000 instruments?
Yes. Waveforms from two or more generators can be synchronized by operating one AFG310x, AFG302xB, AFG3011, or AFG325x as "Master Unit" and any of the AFG3000 Series instruments as "Slave Units." In this configuration, the master's Reference Clock …
|
常见问题 ID56401 | |
|
Will the AFG and AWG products work with worldwide AC power outlets?
The AFG and AWG products have a modular AC power cord, much like the ones used on PCs. This allows you to simply change the whole power cord to accommodate a change in the local AC outlet/plug standard.Note: AFG310 and AFG320 have line select …
|
常见问题 ID57996 | |
|
What is this safety issue concerning the AFG3000 Series?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.Tektronix has determined that certain improper use of the AFG3000 Series instruments may potentially …
|
常见问题 ID64226 | |
|
How can I set up 2 AFG3000 series products to output 4 channels?
Setup to allow phase alignment of up to four channelsAssumption: Setup will start from Factory Default and the frequency of all channels to be phased are the same.1.Connect MasterAFG Trigger Output to Slave AFG Trigger Input2.Connect MasterAFG …
|
常见问题 ID56511 | |
|
Why do the files saved on my AFG3000 series generator have a January 01+ 1980 timestamp on all the files that I save?
The arbitrary/function generator does not have an internal real time clock. If you create a file using the Edit menu of the instrument, the date and time information is displayed like “TEKAFG001.TFW JAN 01 00:00 1980”.
|
常见问题 ID57051 | |
|
Is there a front cover available for the AFG3000 series?
There is no front cover available for the AFG3000.
|
常见问题 ID56751 | |
|
What communication ports are available on the AFG3000 series?
The number and type of communication ports available vary with the model of AFG3000.AFG3021 and AFG3022 have a USB (B) port standard. This port is located on the rear panel. There is no option to add other types of ports AFG3011, AFG3021B, AFG3022B …
|
常见问题 ID57686 | |
|
Why does the amplitude of my signal cut to half+ or even less then half+ when I add noise?
Adding noise in the AFG 3000 uses a power splitter to add the noise to the signal. When you are at the highest amplitude levels of your AFG 3000, it must reduce the amplitude of the signal, in order to be able to add noise. It will halve the …
|
常见问题 ID56266 | |
|
How do I determine if my AFG3000 Series instrument is subject to the safety concern?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.Only AFG3000 Series instruments with serial numbers that begin with C01 are affected. Instruments …
|
常见问题 ID63536 | |
|
Are user manuals for the AFG3000 offered in my language?”
The instrument is available with a user manual in any of the following languages; English, French, German, Italian, Japanese, Korean, Spanish, Traditional Chinese, Simplified Chinese, and Russian. Please specify the desired language at the time of …
|
常见问题 ID56351 | |
|
Is local-language support is provided by the AFG3000 user interface?
The AFG3000 ships with a multilingual user interface pre-installed. The user can choose from any of the following languages for user menus and help text: English, French, German, Traditional Chinese, Simplified Chinese, Korean, Japanese, or Russian …
|
常见问题 ID56731 | |
|
Where do I download or find HDMI Direct Synthesis AWG Patterns?
The pattern files for HDMI Direct Synthesis (DS) AWG pattern files are distributed on three DVDs when you order option HT3-DS for your oscilloscope. You will need to download TDSHT3 software onto your oscilloscope and install the new key code that …
|
常见问题 ID64801 | |
|
What is the minimum waveform size that I can output from my AFG or AWG product?
AFG310/320 10 points AFG3000 series 10 points AWG400 series 64 points AWG510/520 256 points AWG610 512 points AWG615/710/710B 960 points AWG7000 series 1 point (960 points for hardware sequencing) AWG5000 series 2 points
|
常见问题 ID56956 | |
|
What is the difference between “Trigger out” and “Sync out”?
Trigger and Sync Out are almost the same. They are only different in the burst mode, in inifinte-cycle mode.Figure 1: Trigger out modeScope CH1 ->AFGCH1Scope CH2 ->AFGTrigger outScope CH3 ->AFGTrigger in(with T connector)In this case a Trigger out …
|
常见问题 ID56091 | |
|
What is the maximum waveform size that I can output from my AFG or AWG product?
AFG 310/320 16,000 points AFG 3000/B series 131,384 points (except AFG3021 and AFG3022) AFG3021, AFG3022 65,536 points AWG400 series 8,200,000 points (std) or 16,200,000 points (opt. 01) AWG510/520 4,194,048 points AWG610 8,100,032 points …
|
常见问题 ID56951 | |
|
What is the timebase accuracy of the AFG or AWG products?
AFG310/320 50 ppm (25 °C) during 1 year after calibration AFG3000 series 1 ppm (25 °C) during 1 year after calibration AWG400 series 1 ppm (25 °C) during 1 year after calibration AWG510/520 1 ppm (25 °C) during 1 year after calibration …
|
常见问题 ID56981 | |
|
What is DDS on the AFG3000?
Direct digital synthesis (DDS) is a common technique for generating signals. The desired waveform is stored digitally in waveform memory as a series of amplitude points. A digital-to-analog converter (DAC) converts the data into a series of voltage …
|
常见问题 ID56911 | |
|
Can the AFG3000s be configured with differential outputs?
Yes. This can be accomplished with dual-channel instruments by connecting the load between the outputs of channels 1 and 2. For this application, both channels are programmed with identical waveforms, and one of the channel outputs is inverted via …
|
常见问题 ID56431 | |
|
How can I set up 2 AFG3000 series products to output simulated 3 phase power?
Setup for AFG3000 3 Phase 60 Hz Power Simulation1. Connect MasterAFG Trigger Output to Slave AFG Trigger Input2. Connect MasterAFG External Ref Output to SlaveAFG External Ref Input3. Run the Master 3Ph 60Hz.TFS (from zip file below) on MasterAFG …
|
常见问题 ID56396 | |
|
Can I select a different waveform and output frequency for each channel on a dual-channel AFG3000 series?
DDS allows output frequency and waveform to be selected completely independently for each channel.
See more arbitrary function generators »
|
常见问题 ID56411 | |
|
Do the AFG/AWG products have user selectable filters available?
There are user selectable filters available in the following instruments.AFG310/320 No user selectable filters.AFG3000 series No user selectable filters.AWG400 series 1 1 MHz, 5 MHz, 20 MHz, 50 MHz selectable filters.AWG510/520 1,2 20 MHz, 50 MHz …
|
常见问题 ID57211 | |
|
What type of signal connections do I have on my AFG or AWG product?
Product Analog MarkersAFG300 series BNC NoneAFG3000 series BNC BNCAWG410, AWG420, AWG430 BNC BNCAWG510, AWG520 BNC SMAAWG610, AWG615 SMA SMAAWG710, AWG710B SMA SMAAWG7000 series SMA SMAAWG5000 series BNC BNC
|
常见问题 ID57911 | |
|
The AFG3000 recognizes the USB memory stick but does not see the files. Why?
A possibility is that the memory stick is incorrectly formatted. The format needs to be Fat32, Windows format. Other formats such as NTFS will not work.Also the AFG3000 will not show files which do not have the correct extension. i.e. .tfw (trace …
|
常见问题 ID56816 | |
|
Is there any information available that covers the basic principals behind Arbitrary Waveform Generators?
The document XYZs of Signal Generators covers basic AWG and AFG theory as well as a few real world applications.
|
常见问题 ID62791 | |
|
Is the specified waveform memory size in bytes+ words+ or long words of memory and how do I relate that to the number of points in my waveform?
The AFG and AWG memory size is specified in waveform points, so if the memory is listed as 16,000 or 32,400,000, for example, then you can fit 16,000 or 32,400,000 waveform points in a single waveform file.
|
常见问题 ID57481 | |
|
AFG3000: Output Load selection+ does it change the AFG output impedance?
No, it does not, the output impedance of the AFG3000 series is always 50 ohms.The three selections allow the output Amplitude to be calculated correctly based on the DUT load. i.e. (setting at 50 ohms) With a 50 ohm source and a Hi-Z load the output …
|
常见问题 ID55166 | |
|
How do I update the firmware on my AFG3000?
Go to www.tektronix.com and search for your model AFG and select by software. You will want to find the latest firmware file and download it to a USB flash drive. Then insert into the front of the AFG and start by selecting the 'Utility' menu button …
|
常见问题 ID64716 | |
|
How many output channels and markers do I have on an AFG or AWG product?
AFG/AWG Channels Markers/Channel AFG 310 1 0 AFG 320 1 0 AFG 3xx1 1 0 AFG 3xx2 2 0 AWG410 1 2 AWG420 2 2 AWG430 3 2 AWG510 1 2 AWG520 2 2 AWG610 1 2 AWG615 1 2 AWG710 1 2 AWG710B 1 2 AWG7051 1 2 AWG7052 2 2 AWG7101 1 2 AWG7102 2 2 AWG5002 2 2 …
|
常见问题 ID57386 | |
|
How do I save my arbitrary waveform file on the AFG3000 to my USB Stick?
Saving your waveform on the AFG 3000 isn’t in the Save/Recall menu. Instead, you need to go into the Edit menu, press “More” and select “Write To…”, and press the top bezel button to switch from internal memory to USB memory. You will now be able to …
|
常见问题 ID63616 | |
|
Can I store more than four arbitrary waveforms on the AFG3000?
Yes. You can save many more arbitrary waveforms on a USB memory device that plugs into the convenient USB port on the instrument’s front panel. You can also connect the instrument to a PC and use the free ArbExpress™ version 2.0 software included …
|
常见问题 ID56416 | |
|
When I use more than one channel in my AFG3000 series does the number of waveform points available to each channel change?
No. Memory is not shared between channels. The specified maximum number of points is the same on all channels.
|
常见问题 ID61381 | |
|
Can I operate the AFG3000 with a mouse+ e.g.+ to create arbitrary waveforms
The AFG3000 Series cannot be operated via mouse or touch screen, but offers convenient shortcut front-panel keys, numeric keypad, rotary knob, and on-screen bezel menus. Arbitrary waveforms can be created and edited conveniently from a Windows™ …
|
常见问题 ID56391 | |
|
What does the AFG3000 calibration function do?
The calibration function in the utility menul calibrates DC offset and Amplitude. This function is used for preventive maintenance.Further details are described in Service Manual.
|
常见问题 ID56031 | |
|
What is the maximum voltage that I can get out of my AFG or AWG product?
The voltages listed below are all only true if the generator is driving into a 50 ohm termination. AFG 300 series 10 V p-p Maximum into a 50 ohm load AFG 3011 20 V p-p Maximum into a 50 ohm load AFG 302x series 10 V p-p Maximum into a 50 ohm load …
|
常见问题 ID57806 | |
|
How do I determine if my AFG3000 Series instrument has already been modified for the safety issue?
Tektronix has issued a safety notification for the AFG3000 Series Arbitrary/Function Generators. See the safety notification for further information.For AFG3000 Series instruments with serial numbers that begin with C01, if the grounding post on the …
|
常见问题 ID63531 | |
|
AFG3000: How low a duty cycle can I set on the AFG3000 series?
With the latest FW you are able to set duty cycles as low as 0.001%. If you need a lower duty cycle then follow these steps. Press Pulse Press Burst Select 1-Cycle Set a pulse period equal the pulse width plus the rise and fall time shown or set by …
|
常见问题 ID53771 | |
|
Can I connect an oscilloscope to the AFG3000 signal generator to transfer waveforms directly?
The AFG3000 series does not have a direct connection which allows you to transfer a waveform directly from a scope to the AFG. Waveform transfer is supported via ArbExpress, which allows users to easily import waveforms from any Tektronix …
|
常见问题 ID56381 | |
|
Can the AFG3000 series generators produce true random noise+ or just pseudo random noise?
The AFG3000 series can only produce pseudo-random noise. It does not have a true analog noise source. The AWG400 series and AWG500 series generators have analog random noise sources built in, providing a true random noise source.
|
常见问题 ID63276 | |
|
How do I create a differential signal on the AFG3000 signal generators?
You will need to use both single ended channels on a two-channel instrument. You will create the positive side on Channel 1, and create its compliment on Channel 2.Note: This method is ineffective while in Run Mode: Modulation or Run Mode: Sweep.
|
常见问题 ID60701 |
