Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.
- Windows 7 oscilloscope with firmware version 6.4 or later
- MATLAB with the Instrument Control Toolbox or any other toolboxes you will use (e.g. Signal Processing Toolbox).
This example will show you how to update a txt file using the Application Development Kit (ADK) with values for your cutoff frequency. Then using a custom MATLAB filter file it will read in the values from this txt file and apply the appropriate butter worth 3rd order filter with corresponding cutoff frequencies.
Applications: Using MATLAB with Tektronix Instruments
Product: MSO70404C, MSO70604C, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MSO72004C, DPO5054, DPO5104, DPO5204, DPO70404C, DPO7054C, DPO70604C, DPO70804C, DPO7104C, DPO71254C, DPO71604C, DPO72004C, DPO72504D, DPO7254C, DPO73304D, DPO7354C, DSA70404C, DSA70604C, DSA70804C, DSA71254C, DSA71604C, DSA72004C, DSA72504D, DSA73304D
常见问题ID : 64766查看所有常见问题 »