I have a Tektronix DPO3000 or MSO3000 instrument that I would like to upgrade the bandwidth on.
DPO3000 and MSO3000 100MHz and 300MHz models with product Software revision 2.38 or greater can be upgraded to a higher bandwidth (300MHz and 500MHz, respectively).
Models starting with serial number C02XXXX/B020XXX can be upgraded by the customer by ordering one of the following upgrades, which are software key enabled.
2 Ch Bandwidth Upgrade from 100 MHz to 300MHz DPO3BW1T32
4 Ch Bandwidth Upgrade from 100 MHz to 300MHz DPO3BW1T34
2 Ch Bandwidth Upgrade from 100 MHz to 500MHz DPO3BW1T52
4 Ch Bandwidth Upgrade from 100 MHz to 500MHz DPO3BW1T54
2 Ch Bandwidth Upgrade from 300 MHz to 500MHz DPO3BW1T52
4 Ch Bandwidth Upgrade from 300 MHz to 500MHz DPO3BW1T54
Products with serial number starting C01XXXX/B01XXXX will require Tektronix Service Installation and re-calibration as they require a hardware change to increase the instrument bandwidth.
Please contact your local Tektronix sales office if you wish to order one of the above uprades for your instrument.
Product Series: MSO3000 / DPO3000
Product: DPO3012, DPO3014, DPO3032, DPO3034, DPO3052, DPO3054, MSO3012, MSO3014, MSO3034, MSO3054, MSO4032, MSO3032
常见问题ID : 64621查看所有常见问题 »