联系我们

技术支持
售前咨询

与泰克代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。

电话

致电我们

工作时间：上午9:00-下午5:00（太平洋标准时间）

下载

下载手册、产品技术资料、软件等：

下载类型
型号或关键字

反馈

MSO Option SEC Read This First

Change the default BIOS password for enhanced security

Use this procedure to change the BIOS access administrator password from the default factory installed password to a custom password for your organization. Only applies to instruments with option 5-SEC installed.


此手册适用于:

MSO56, MSO58, MSO58LP, MSO64, MSO44, MSO46, MSO54B, MSO56B, MSO58B, LPD64

相关产品信息

  • 手册类型: 发布说明
  • 部件号: 071356902
  • 发布日期:

下载即代表您同意手册下载协议的条款和条件。

手册下载协议

注意：从本网站下载任何文档之前，请认真阅读以下条件和条款。 如果从泰克网站上下载手册，即表示您同意以下条件和条款：

当前支持的产品的手册：

泰克在此向泰克仪器的所有者授予权限和许可，可从此网站上下载和复制手册供其自己内部或个人使用。 除非经过泰克公司书面专门授权，当前支持产品的手册不得复制用于发行。

泰克手册可能会被更新以反映产品制造寿命过程中所做的更改。 因此，任何给定产品都可能存在多个手册版本。 请小心使用，确保为特定的产品序列号获取正确的手册版本。

不再支持的产品的手册：

对于不再适于长期支持的测量产品，泰克无法提供手册。 泰克特此向他人授予权限和许可，对于 (a) 拥有泰克部件号，并且 (b) 用于泰克不再支持的测量产品，可以复制和发行泰克任何测量产品手册的副本，包括用户手册、操作手册、维修手册等等。

泰克手册可能会被更新以反映产品制造寿命过程中所做的更改。 因此，任何给定产品都可能存在多个手册版本。 请小心使用，确保为特定的产品序列号获取正确的手册版本。

此授权和许可不适用于泰克仍在提供的任何手册和其他出版物，或者用于视频制作产品或彩色打印机产品的任何手册和其他出版物。

免责条款：

对于非泰克提供的、或者按照上述授权和许可复制或发行的任何测量产品手册或其他出版物，泰克对于其中所含任何信息、文字、图形、原理图、部件清单或其他材料的准确性和完整性不做保证。

泰克可能会随时更改本网站或其产品的内容而不事先通知。

责任限制：

对于使用按照上述授权和许可制作或发行的任何测量产品手册或其他出版物所造成的任何损害，包括但不限于利润损失、业务中断或侵犯知识产权，泰克不应承担责任。

 

Read Online

MSO Option SEC Read This First
CHANGE THE DEFAULT BIOS PASSWORD FOR ENHANCED SECURITY

Change the default BIOS password for enhanced security

Instruments with the option installed have the BIOS administrator password set to Tektronix by default. Using a BIOS administrator password prevents unauthorized BIOS modification and booting from USB flash devices.

Before you begin

Make sure to keep a record of the new instrument BIOS administrator password that you create in your organization’s records. There is no way for Tektronix to gain access to the instrument BIOS settings once the password has been changed from the factory default value, if access is needed for repairs.

If you need to return the instrument to Tektronix for service, change the BIOS administrator password back to the factory default value Tektronix before sending the instrument to the Tektronix Service Center.

About this task

For enhanced security, change the default BIOS administrator password before using the instrument in your work area. Use the following procedure to change the default BIOS administrator password.

Note:This password is only used to access the BIOS settings utility. No password is required to power-on and use the instrument.

Procedure

  1. Connect a keyboard to the instrument. If you are changing the password for an MSO58LP or LPD64, also install an external monitor.
  2. Power on the instrument.
  3. While the instrument is powering on, continuously tap the F11 function key until the Enter password field is shown.
  4. Enter Tektronix and press the Enter key. The instrument opens the Please select boot device menu.
  5. Use the down arrow key to select Enter Setup and press the Enter key. The instrument opens the Utility Setup menu.
  6. Use the right arrow key to select the Security tab.
  7. Use the arrow keys to select Administrator Password (should be selected by default) and press the Enter key. The instrument opens the Enter Current Password field.
  8. Enter Tektronix and press the Enter key. The instrument opens the Create New Password field.
  9. Enter a new password in accordance with your organization’s guidelines and using the following constraints.
    • Valid characters are A-Z, a-z, 0-9, and !, @, #, $,%, ^, &, and *
    • No spaces or periods
    • The password must be between 3 to 20 characters long
  10. Press the Enter key. The instrument opens the Confirm New Password field.
  11. Reenter the new password and press the Enter key. The Confirm New Password field closes and returns you to the Setup Utility screen.
  12. Press function key F4 to save the BIOS settings and exit the Setup Utility screen. Select Yes and press the Enter key when requested to save configuration and exit.
  13. The instrument closes the Setup Utility screen and begins the normal power-on process.

Results

This completes the procedure to replace the default BIOS access administrator password.