联系我们

与泰克代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

BSAPCI3 PCIe 3.0 Receiver Test Application Software, V1.1.1449

The PCIe 3.0 Receiver Test Automation Software (BSAPCI3) runs on a BERTScope or peripheral PC, and connects to a BERTScope and DPP (Digital PreEmphasis Processor) test equipment via LAN. It uses remote control automation protocols to fully automate the PCI Gen3 CEM based receiver testing. BSAPCI3 software also allows PCIe Gen3 receiver link equalization testing when used in conjunction with a DPP-C and the BERTScope models noted below.

The software automates the process of calibrating the connection between the DPP and the BERTScope; and saves the calibration results in a database. The software also automates the process of calibrating the stressed eye for performing BER testing.

BER testing is performed by stepping through a wizard that automates the process of loopback initiation and BER testing. The results are stored in a database and can be reported as HTML files or exported to CSV Files.

Special Configuration notes:

1. For customers who need to perform Rx Link Eq testing, the RS232 connector on the back of their BERTScope C must be labeled DPP LINK. For BERTScope BSAxxxC with serial number 280514 and below, the upgrade BSAxxxCUP COMUP must be installed to enable the DPP LINK high speed serial connection.

2. Update DPP125C SW. Upgrade Instructions can be found here (search for Tektronix document part number 071320900).

此软件适用于: BSA175C, BSA260C, BSA286C, DPP125C

相关产品信息